REWPAIR AND MAINT TO FLOORING, TILING, BRICK MASONARY, PLASTERING, CUPBOARDS, ALUMINIUM WINDOWS, DOOR AND ALLIED WORKS IN OFFICERS AND ORS MD ACCN AREA UNDER AGE B AND R-I CHANDIPUR

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing)removing serviceable tiles to store and rubbish off the premises complete all as directed.

Demolition of brickwork any description and position built in cement mortar complete all as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level complete all as directed.

Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) of area not exceeding 1.50 Sqm each complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) of area area exceeding 1.50 Sqm but not exceeding 4 Sqm. each complete all as directed.

Taking down shutter of any description not exceeding 1sqm each and removing to stores or from site of work complete all as specified and as directed.

Taking down shutter of any description exceeding 1 sqm but not exceeding 2 sqm each and removing to stores or from site of work complete all as specified and as directed.

Dismantling of wall and ceiling boards ( fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets and removing unserviceable materials from site of work complete all as specified and directed.

Taking up or down steel tubing and connections, 15mm bore and removal of unserviceable pipe from site of work complete all directed.

Taking up or down steel tubing and connections, 20mm bore and removal of unserviceable pipe from site of work complete all directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, any thickness, including Nainital or similar pattern roof coverings complete all as directed.

M&L for non skid ceramic colour tiles, 7 to 8 mm thick, area of each tiles exc 0.06sqm but not exc 0.11 sqm squre / rectangular in floor set and jointed in neat cement slurry and pointed in cement mixed with colour pigment to match over and including 15 mm thick screed bed or bedding layer in cement mortar(1:4) as in floors for receiving tiles complete all as specified and as directed.

M & L for 300 x 200 x 7mm thick coloured glazed ceramic tiles as in vertical surfaces such as dados / skirting etc. set and jointed in neat cement slurry and pointed in white cement over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick squre / rectangular area of each tiles not excedding 0.36 sqm in floor set and jointed in neat cement slurry and pointed in cement mixed with colour pigment to match over and including 15 mm thick screed bed or bedding layer in cement mortar(1:4) as in floors for receiving tiles complete all as specified and as directed.

All as per item No.16 above but on vertical surfaces over 10mm thick backing coat in cement mortar(1:3) for receiving tiles complete all as directed.

S&F 20mm thick granite of any type work table rubbed and polished in steps, jambs,pillars,cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed of cement mortar (1:6) after taking down old slab complete all as directed.

M&L for prepolished chemically treated chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments over and including 20 mm thick cement mortar 1:6 bedding layer in floors fixed complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as directed and specified by Engr-in Charge

S&F corner glass shelf assembly consisting of 5.5mm thick sheet glass with CP bracket guard & railing 60cm long complete all as specified & directed.

Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) all as specified and directed.

Material and labour for half brick work in cement mortar (1:4) straight or curved on plan to any radius with locally available Subclass ‘B’ old size best quality bricks all as specified and directed.

M&L for 75 mm thick PCC type D-2 , 1:4:8 (40mm graded crushed stone aggregate) as in sub base complete all as specfied and directed

Material and labour for providing 50 mm thick cement concrete (1:2:4) type B1 using 20mm graded aggregate as in pavings/path surfaces fair and even without using extra cement and spike rolling to surfaces or making impression of expanded metal, whilst the concrete is green surface complete all as specfied and directed

Material and labour for providing 75mm thick cement concrete (1:3:6) type C2 using 40 mm graded aggregate as in plinth protection surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brickwork or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Supply only Integral waterproofing compound all as directed.

M&L for rendering 15 mm thick on fair face of brick wall or concrete surface in cement mortar1:4 mixed with WPC @ 3% (or as per manufaturers instruction) finished even and smooth without using extra cement, complete all as specified and as direted. (Note : WPC shall be measured and paid separately)

S&F factory made PVC door frame of size 125 mm x50 mm double rebate with a wall thickness of 5mm PVC sheet , made by joining 3 nos heat bent PVC sheet 'C' channel of 5 mm PVC foam sheet of sizes 35mm x 35 mm x 25mm & 40mm x55mmx40mm & 25mmx 35mm x35mm using solvent cement. The two side 'C' channel shall be reinforced with 19mm x 19mm MS square tube of 19 guage. All the three 'C' channel shall be fixed to flat base of 5 mm PVC sheet with solvnet cement. The profile shall be mitre cut at two corners and joined by inserting 4 nos 150 mm long brackets of 15mmx15mm MS square tube inside the 19 mm squre tubes. The two vertical door frames are to be reinforced with 40X20mm MS tubes of 19 gauges duly filled with 18 mm thick PVC through out the frame. The door frame shall be fixed to the wall using 100 mm long nickel coated dry wheel screws through the frame by uisng PVC fasteners. A minimum of 8 Nos of screws to be provided for each vertical member and minimum 4 Nos for horizontal members etc complete as per manufacturers specification and direction of Engineer-in-Charge

S&F Solid PVC single Door frame of size 50mm x 95mm made out of 5mm prelam PVC sheet reinforced with M.S. tube, suppling & fixing in opening as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Supply and fixing of aluminium sliding window with powder coating (minimum thickness of powder coating 50 micron) including following components / specifications complete all as specified and as directed. (i) Two leaf glazed sliding shutter and one leaf gauged (fly proofing) sliding shutter. (ii) Opening of windows exceeding 0.90 Sqm but not exceeding 1.50 Sqm (iii) Thickness and weight per metre length of aluminium frame and section of shutter all as shown on drawing. (iv) All vertical/ horizontal joints shall be of extruded aluminium section so as to avoid any play between jointed members. (v) All other accessories such as jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, etc.

M&L for powder coated Aluminium casement windows and ventilator shutters, side hung type without sash bars, side hung type without sash bars, aluminium sections including necessary joining cleats, glazing clips rubber packing anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150 mm long (1 No) hinges type B-21 100 mm long (2 Nos) suitable hndle (1 No) complete all as specified and as directed.

S&F in repairs powder coated aluminium DECO grills 10mm thick, DG - 104 complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as directed.

S&F in repair 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S&F 100 mm size butt hinges "medium weight" cold rolled mild steel complete all as specified and directed.

S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 100 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

S&F 3.0 mm thick figured glass, pin head type glazing with oil putty in squares not exc. 0.50sqm in each pane complete all as specified and as directed.

S&F Sheet glass 5.5mm thick, ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones all as directed.

S & F stainless steel wire cloth, 0.36mm nominal dia. of wire and average width of aperture 1.40mm fixed with tinned tacks, or stainless steel wire staples including all cuttings, wastage, etc complete all as specified and directed.

S & F stainless steel wire cloth in repair, 0.36mm nominal dia. of wire and average width of aperture 1.40mm fixed with tinned tacks, or stainless steel wire staples including all cuttings, wastage, etc complete all as specified and directed.

Supply & Fixed in repair sheet glass 3.0 mm thick ordinary quality and glazing with oil putty in squares not exc. 0.50 sqm in each pane fixed with wooden beads (painted with two coats of synthetic enamel paint over a coat of primer of reqd tint) or glazing clips with oil putty complete all as specified and as directed.

Supply and fixed in repair mild steel chromium plated aluminium anodized tubular curtain rails, 20mm dia, with fixing brackets, stops, rollers etc. complete all as specified and as directed.

Supply & fixing Polyvinyl Soffit Size : 340X3000X1.2MM System (anti-bacterial, fire retardant waterproof) tested at 50 LBS for impact resistance, having tensile strength >37 & >2000,Fire resistance having class1 tested to 1S10151 and meets the standard specification of ASTM D-4477, including the frame made out of standard GI channel of Truesteel consists of ceiling section, perimeter,intermediated etc. complete all as per manufacturer's instruction.Make- Armstrong/ Saint Gobain / Ramco Hilux / Gypframe steel

Supply and fix 15mm bore galvanized steel tubing "medium grade" with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

Supply and fix 20mm bore galvanized steel tubing "medium grade" with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

S&F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F in repair of 15 mm bore bib taps, cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair of 15 mm bore pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair of 15 mm bore stop valves, cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair chromium plated hand shower (health faucet) completed all as directed.

S&F in repair chromium plated soap dish complete all as specified and directed.

S&F in repair chromium plated towel rail 600mm long complete all as specified and directed.

S&F corner shelf PTMT (Set of Three) fixed on walls with wooden plugs with chromium plated brass screws and cup washers complete all as directed.

S&F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

Supply and fixed in repair vitreous china wash down water closet pan (Pedestal pattern), white, including fixing bolts nut & plastic water closet seat back excld flushing cistern and flush pipe, including taking down unserviceable water closet pan complete all as specified and directed.

S&F in repair vitreous chaina squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete (excluding flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc. complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless syphone action dual type (5/10 Ltrs), flushing cistern, low level, white with inlet, ball valve float and handle incl brackets with PVC high flush pipe complete all as specified and directed.

S&F in repair vitreous chaina wash hand basin 550X 400mm (flat ball type) any size including cutting for and pinning in ends of brackets including waste coupling, waste water pipe complete all as specified and directed.

S&F in repairs plastic water closet seat cover, white / black, with mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs 32mm waste coupling for kitchen sink including waste pipe fixed complete all as specified and as directed.

S&F for 15mm size PVC connection pipe with PTMT nut of length 450mm complete all as specified and directed.

S&F in repair 500 ltrs rotational moulded polythytene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part I including 20 mm ball brass valves high pressure with polythene float and nut complete including dismantling of old one all as specified and as directed.

S&F in repair 1000 ltrs rotational moulded polythytene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part I including 20 mm ball brass valves high pressure with polythene float and nut complete including dismantling of old one all as specified and as directed.

S&F in repair of 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gram) complete all as specified and directed.

M&L for preparation of new or previously un-treated steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for applying two coats of acrylic distemper with roller over one coat of primer over 1mm thick wall care putty to new plastered wall surfaces inluding preparation of surfaces complete all as specified

M&L for preparation of new or previously untreated wall surfaces & applying two coats of acrylic base weather shield paint (1st quality) over one coat of exterior grade primer including preperation of surfaces complete all as specified & directed.

M&L for applying one coat of white washing after preparation of old decorated plastered or unplastered surfaces of wall complete all as specified and as directed

All as per serial item No 79 above but as on ceiling complete all as directed.

M&L for preparation of old distempered surfaces of wall including cornices, pilasters and other wall features etc by washing, rubbing down and stopping and applying one coat of acrylic washable destemper with roller on the same complete all as specified and as directed.

Material and Labour for applying two coats of oil bound distamper over one coat of primer, white or tinted to plstered surfaces of walls after complete removal of existing treatment, including preparation of surfaces comlete all as specified and directed.

M&L for preparation of old distempered surfaces of ceiling by washing, rubbing down and stopping and applying one coat of acrylic washable destemper with roller on the same complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described for, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth, not otherwise described for and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repair 18/19 mm thick PVC board one side laminated to wood colour grain cut to size as required and fixed in position for cabinets etc complete as directed by Engr-inCharge.

RANA ENTERPRISES (BID ID -3326672)

KRISHNA ENTERPRISES (BID ID -3328689)

M/s Manas Ranjan Bera (BID ID -3326906)

chauhan syndicate (BID ID -3326938)

RPL SYNDICATE CO (BID ID -3327614)

Bansal And Co (BID ID -3328935)

J B NATH AND SON (BID ID -3329208)