PROVN OF GUARD ROOM WITH TOILET AND BATH ROOM AT OFFRS MESS OF 509 ABW AND PROVN OF SECURITY FENCING AROUND BLDG NO P-16 (QTR GD KOTE) AND CERTAIN MINOR WORKS UNDER AGE BR-I, AGE BR-II OF GE(EAST) AGRA

Amount

Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc or depth for foundation etc or for shafts, wells, cesspits, pier holes etc n. exc 10 sqm on plan and n. exc 1.5 m in depth and getting out in soft and loose soil complete all as specified and as directed.

M&L for 150 mm dia SGSW drain pipes grade ‘A’ laid in trenches and jointed in cm 1:1 complete all as specified and directed.

M&L PCC 1:4:8 type D-2, (using 40mm graded stone aggregate) as in bed of drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for the 150mm dia of pipe complete all as specified and directed

M&L,cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate ) as in foundation filling and mase concrete complete all as specified and as directed.

M&L for providing PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, bands, plinth course, benching and other similar works including use and wast of necessary form work complete all as specified and directed.

M&L for providing pre-cast RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cover (for manholes and drains) including necessary form work set in CM 1:4 with and including demolition complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately)

M&L for 25 mm thick sand cushion layer for laying interlocking pavers complete all as specified and directed.

M&L for 60 mm thick precast PCC interlocking coloured paver rubber moulded block factory made of grade M 35 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS -15658- 2006 laid and jointed over sand cushion layer complete all as specified and directed. Note : Sand cusion shall be measured & paid separately

M&L borken stone or boulders hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by EIC.

M&L for 75 mm thick Cement concrete type C2 1:3:6 (using 20 mm graded stone aggregate) in hard standing and plinth protection laid in panel etc, finished even and smooth with out using extra cement complete all as specified and directed.

M&L for re-inforced cement concrete M-25 (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed.

M&L for re-inforced cement concrete M-25 (20 mm gtrded aggregate) in Columns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L for re-inforced cement concrete M-25 (20 mm gtrded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for re-inforced cement concrete M-25 (20 mm gtrded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for formwork to sides & soffits of floor or roof beam, lintels, cantiliver beam and similar work etc (Horizontal or sloping) for flat foir finished surface complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n exc 200mm thick (Horizantal or sloping ) for flat foir finished surfaces complete all as specified and directed.

M & L formwork to edges of concrete roofs exc 10cm n exc 20cm wide for fair finished surface complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

-Ditto- all as per item No 20 above but 6 to 8 mm dia complete all as specified and directed.

-Ditto- all as per item No 20 above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

M & L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L,cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate ) in foundation filling sub bsae of floor and mass concrete complete all as specified and as directed.

M & L 25 mm thick Cement concrete1:2:4 type B-1, (using 20mm graded aggregate) complete all as specified and directed.

M&L for non skid ceramic coloured tiles (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles over 15mm thick screed bed in CM 1:6.complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles 450X 300X 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed.

M&L for 15mm thick plastering in CM 1:4 with WPC on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed.

M&L for 12 mm thick plastering in CM 1:6 on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed.

M&L for rendering 5 mm thick plastering on concrete surfaces of ceiling in CM 1:3, finished the surface even & smooth complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of average 2mm thick Birla putty on new plastered surfaces including preparation of surface complete all as specified and directed.

Material and labour for water proofing treatment of roof slab all as specified below. (i) Preparation of plaster surface roof by brushing and cleaning . (ii) Applying a priming coat with bitumen primer @0.5 Kg/Sqm (iii) Applying tack coat of hot blown industrial bitumen grade 85/25 @ 1.20Kg per sqm (iv) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. (v) Applying two coats of aluminium paint @ 100 gm /sqm ( each coat), complete all as specified and directed.

S&F 15mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 20 mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket etc making good disturbed portion complete all as specified and directed.

S & F Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F 15mm bore CP stop cock, cast copper alloy fancy type, screwed down high pressure, screwed for iron pipe or for unions for consealed type and fixed complete all as specified and directed.

S&F Vitreous China wash hand basin white flat back size 550x400mm including brackets , CP waste coupling and 32 mm pvc flexible waste pipe 800mm long etc complete all as specified and directed.

S&F Pillar taps cast copper alloy fancy type with capstan heads chromium plated scrwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for 15 mm dia iron pipe complete all as specified and directed.

Supply and fixed angle stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S & F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F vitreous China squatting pan (Orissa pattern), white, of size 580x440mm white, with CI 'P' or 'S' trap, integral foot rests including flush pipe, trap, lime concrete bedding inlcuding taking out of old lime concrete bedding, unserviceable connections etc connecting up new and making good disturbe portion complete all as specified and directed.

S&F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and PVC connections 15mm size with PTMT nuts of length 450mm etc, connecting up new and making good disturbe portion complete all as specified and directed.

Supply & fixing brass CP tubular towel rail, 60 cm long, 20mm bore, D type complete all as specified and directed.

S&F brass CP Soap dish complete all as specified and directed.

S&F, 1000 liters capacity Rotational moulded polyethylene water storage tanks with cover & 20mm PVC float valve (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed.

S & F PVC (SWR) floor trap, plain with grating including jointing with solvent cement (Diameter of outlet 75mm), jointing to waste pipe and fixed in cement concrete 1:2: 4 (type B1) mixed with pedilite water proofing liquid @ 200ml in 50 kg cement, connecting up new and making good disturbe portion complete all as specified and directed.

Supply & fixing mild steel C.P. grating 100/125 mm dia as reqd at site complete all as specified and directed.

S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

Supply & fix solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 176 of SSR 2020 (Part-II) complete all as specified and directed.

S & F 40 mm thick flush shutters factory made, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply & fix Glazed or skeleton factory made door shutter, 35mm thick of second class hard wood (hollock), open rebated and prepared to receive glass, gauge ( without sash bars) with plain, chamfered or rounded, mitred beads for glass etc , size of members of shutters shall be as specified in SSR Part I, section -8 clause 8.24 (a) complete all as specified and directed.

S&F MS work as in chowkhats of doors to receive door shutter, etc conforming to (Fe-290) Gde E-165 complete all as specified and directed

S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

S&F 200 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F 300 mm mild steel sliding bolt bolt type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts and fixed complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed with screw/ welding (Size of hinges in 100 mm) complete all as specified and directed.

S & F, 150mm floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F mild steel work for hold fast and similar small articles conforming to Fe 410-0 or Fe 310-0 including MS screws, bolts, including tarring with a coat of tar and sanding complete all as specified and directed.

M&L for providing, PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) for embedding hold fasts including necessary form work etc.complete all as specified and directed.

S & F steel windows with side hung shutters using steel section with glazing bars including box type hinge, 01 'Z' section handle, 02 Nos 100mm MS tower bolt, one steel peg stay etc in each leaf dovetailed or welded complete all as specified and directed.

S & F factory made steel windows with side hung shutters with using 'Z' steel section without glazing bars including box type hinges, 01 'Z' section handle, 02 Nos 100mm MS tower bolt, one steel peg stay etc in each leaf dovetailed or welded complete all as specified and directed.

S & F steel ventilators with top hunh shutter & glazing bars hinges, steel peg stay etc dovetailed or welded, size and thickness of members confirming to IS 1038 complete all as specified and directed.

S&F framed work such as guard bars, grills etc and similar work confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

M&L 3mm thick ordinary quality sheet glass and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed.

Supply & fix galvanized mild steel wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated wood surfaces complete all as specified and directed.

M & L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Returning filling in soft/loose soil incl. spreading levelling watering and well ramming in layers n. exc 25 cm complete all as specified and directed.

Removing surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above starting point complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipes and rendering, cutting out existing benching for and forming, branch channel( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finish and reforming benching as required for 150 mm dia SWG pipe complete all as specified and directed.

M&L Brick work with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

M&L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:6 complete all as specified and as directed.

M&L Rendering 15 mm thick on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:6 finished fair and even complete all as specified and as directed.

M&L Rendering 10 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for Earth filling under floor, including spreading, leveling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.

Supply only Integral water proofing compound

M&L Reinforced cement concrete (design mix) M-25 (using 20mm graded stone aggregates) in Chajjas and the like complete all as specified and directed.

M&L Reinforced cement concrete (design mix) M-25 (using 20mm graded stone aggregates) in baffle walls and the like complete all as specified and directed.

Surface excavation n.ex(not exceeding) 30 cmdeep and averaging 15cm deep and getting out complete all as specified and directed.

M&L for form work to chajjas etcs and similar work fair finished surfaces (flat) complete all as specified and direceted.

M&L 75 mm thick cement concrete 1:4:8 type D-2( using 40 mm graded stone aggregate) as in sub base of any surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks triple layered (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) (Make : Prayag) complete all as specified and directed.

S&F stop valves/angle valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both ends for iron pipe 20mm dia, fixed complete all as specified and directed

M&L 25 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) complete all as specified and directed.

S & F 300 mm long aluminium alloy, anosised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts of extruded sections complete all as specified and directed.

S&F 4 mm thick Figured glass, pinhead type in squares n exc 0.5 sq. m each pane and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F vitreous china pedestal pattern type wash down water closet pan white with EWC seat cover and floor mounted fittings etc complete all as specified and directed.

S&F PVC connections of 15mm size with PTMT nuts of 450 mm long complete all as specified and directed.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed.

S&F Toilet paper holder white of vitreous china fixed to walls with screws box type complete all as specified and directed.

S & F 75 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F for 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F for 75 mm bore PVC (SWR), junction single (single T) equal or unequal complete all as specified and directed.

S & F for 75 mm outlet PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

Excavation over area n.exc. 1.50m deep and getting out in soft/loose soil.etc complete all as specified and directed.

-ditto- all as per item No 103 above but depth exc 1.5m but n.exc. 3.00m.etc complete all as specified and directed.

M&L for rolled section as in framing for cladding, glazing, man hole frame and the like fixed with angle cleats and connecting plate, etc Fe-410- W(Gde-E-250) quality-B etc complete all as specified and directed.

M&L Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc etc complete all as specified and directed.

M&L for providing Cement Concrete 1:3:6 Type C1 (using 20mm graded stone aggregate) as , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

S&F in repair urinal of size 265 x 335 x 695 mm (snow white) fixed to wall complete all as specified and directed. model Caravan, Make Cera,or equivalent as approved by GE

S&F Framed work as in ornamental steel gate revolving on bearing plate incl pintel hinges fixed on pillar with PCC block of size required at site as per sample approved by Engr-in charge. Note:-Weight of gate decided by BOO which will be conveyed by GE before fixing and necessary arrangements for weighing of steel gate by the contractor on his own expense.

M&L Providing, cement concrete 1:2:4 type B1, (using 20mm graded stone aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, complete all as specified and directed.

Material and labour for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms including moulding and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including 15 mm thick screed bed in cement mortar 1:4 Completed all as specified and directed.

M&L Writing letters or figureswith 1mm thick stainless steel sheet of grade 304 (Block.Roman, Italic or Indian) n exc. 30 cm hight over granite stone with stainless stee plates securing with screws and fixed complete all as specified and directed.

M&L Surface dressing n exc 15 cm deep complete all as specified and directed.

M & L 25 mm thick cement concrete 1:2:4 type B-1, (using 20mm thick graded stone aggregate) as in floors finishes wthout using extra cement complete all as specified and directed.

M & L for coloured designer chequered tiles 300 X 300 exterior grade (ENDURA or equivalent) 12.50 mm thick laid over 15 mm thick screed bed in CM 1:6 set & jointed in neat cement slurry with pigments to match the tile, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Excavation in post holes soft/loose soil (or similar holes) each n, exc 0.5 cum and getting out soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, or with PCC 1:4:8 type D-2 watering and romoving surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 100 mm thick cement concrete type D-2, 1:4:8 mix (using 40mm graded stone aggregates) as in Subbase of hardstanding complete all as specified and as directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick and over set jointed with grey cement and pigments and pointed in neat cement slurry in floors including 15mm thick sreed bed in CM 1:6 complete all as specified and directed.

M&L Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete al as specified and directed.

S&F steel work in tubular trusses including special shaped washer welding to plates etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F mild steel joist channel angle or tee sections fixed independently with out connecting plates welded etc of gradeW(Gde-E-250)quality-B complete all as specified and directed..

M&L for preparation of old plastered surfaces of wall and applying one coat of white wash complete all as specified and directed.

S &F of Mild steel round bars Fe 290 (Gde - E-165)10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F screw bolts (machine made) with hexagonal or sqare heads at one end and screwed the other each screw to be fitted with one hexagonal or square nut length of bolts n exc 10 cm and dia of shank 5-10mm complete all as specified and directed.

Supply only GI chain link fencing including line wires any mesh and any size and type to any type of standards rails etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed

S&F galvanised ,2 stand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails staining bolts incl, securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc as directed (each line wire to be measured) complete all as specified and directed.

S & F razor type concetina coil hot galvanised spring tensile wire fixed on Y shape angle iron having baebed wire and coil having 6 to 8 Rm per coil of 610 mm dia and minimum weight 7.5 KG / Coil etc complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide primer on new steel Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint including preperation of surface all as specified and directred.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FR PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit not less than 20 mm dia with all accessories and FR PVC insulated 1.5 Sqmm multi standard sheathed copper wire for continues earth, including cutting and chasing of wall surface for laying PVC conduit and modular sunken box and connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. Make Polycab/Finolex/RR Kablel/Grandlay. Note :Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost for the following :- (a) One light point or one fan point controlled by one switch

-Ditto all as per item No 134 above but One 3 pin socket outlet 5 amps on the same board with other switches

-Ditto all as per item No 134 above but One 5 pin socket outlet 5/6 Amps on independent board

All as per item No 134 above but with cable size 4 Sq mm for one AC socket out let on 16 Amp independent board / AC point and multistrand insulated copper earth continuity conductor of size 4 sqmm all as specified and directed.

Supply and fix switch piano flush button single pole one way 5 amps 240 volts with polycarbonate body all as specified and directed. Make : SSK Top Line/Legrand/Havells

Supply and fix Switch piano flush button single pole one way 15 amps 230 Volts with polycarbonate body all as specified and directed. Make : SSK Top Line/Legrand/Havells

Supply and fix socket 5 amps 5 pin flush type, 240 volts. with polycarbonate body. Make : SSK Top Line/Legrand/Havells

Supply and fix socket out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body all as specified and directed. Make : SSK Top Line/Legrand/Havells

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd, complete all as specified and directed

S&F ceiling rose , 3 phase/PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals all as specified and directed. Make : SSK Top Line/Legrand/Havells

Supply and fixing LED lights fitting 1x 20W(batten and rod separate), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as as specified and directed

S&F Lamp holder/angle holder insulated body with black/white plate for batten fittings complete all as specified and directed..

S&F of LED Bulb 7 W, warm white all as specified and directed. Make : Cat Pt No LHLDEUHEML8R009 of Havells or equivalent in Bajaj/Philips/CG

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specfied and directed

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and direceted.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 4 way with IP-43 protection double door complete with appropriate size bus bar and neutral link complete all as specified and directed. Make : Legrand/Schneider/L&T/Hager

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 protection double door complete with appropriate size bus bar and neutral link complete all as specified and directed. Make : Legrand/Schneider/L&T/Hager

Supply and fixing MCB SP 5 to 32 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB SPN 40 to 63 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

Supply and lay XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 Core, Complete complete all as specified and directed.

Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.

Supply and laying well burnt sub class ‘B’ bricks. ( designated 75) locally available best quality laid dry in trenches for protection of underground cable all as specified and directed.

Supply and lay GI tube medium grade 25mm size as in cable protection pipe including all fittings complete all as specified and directed. Make Jindal/Prakash/Surya/Bansal

Supply and lay GI tube medium grade 20mm size as in cable protection pipe including all fittings complete all as specified and directed. Make Jindal/Prakash/Surya/Bansal

M&L for cutting existing pipe line of any size and insert a reducer 'T' to feed an outgoing connection of 25mm dia inlcuding drilling, cutting etc complete. Note : The cost of earthwork and 'T' deemed to be included in the rate quoted

Supply and fix 25mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Make : Havells/Wipro

Supply and fixing MCB SPN 6 to 32 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.. Make : Legrand/Schneider/Havells/Hager

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 4 Sqmm 2 Core, including dismantling of Old Unsv cable Complete all as specified and directed. Make : Havells/Polycab/Grandlay

m/s shanti consruction co