Construction of Anganwadi Building at Sanjivirayan Pettai Center No 33607140131 in Tindivanam Municipality

Amount

Earth work excavation in all soils and sub soils except hard rock requiring blasting including sheering and shuttering and bailing out water wherever necessary refilling the sides of foundation with excavated earth in layer of 15 Cm thick well rammed consolidated and depositing the surp less earth within compound in places shown by the departmental officers with all leads and lifts etc., complete.

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification

Cement concrete 1:4:8 mix ( One cement 4 sand and 8 40 mm HBG ISS metal ) using 40 mm HBG metal for foundation and basement and including cost & conveyance and all labour charges including dewatering if found necessary and said layer in not more than 15 Cm thick etc., complete as per standard specification.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Supplying and errecting and centering for sides and soffits of plain surface suchas R.C.C. SLAB Rectabgular, T.Beam lintel bed block staircase, waist slab, landing slabe, etc. complete including strutting shuttering and remaining same etc. complete as per standard specification. Below Basement

Supplying , fabricating and placing in position of steel Reinforcement using Mild steel or Ribbed Tor Steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc. complete as per standard specification.

Brick work in Cement Mortor 1:5 mix (One Cement and Five Sand) using approved Quality country bricks of standard size 8 ¾ x 4 ¼ x 2 ¾ including cost and conveyance and all labour charges and all other incenditial charges etc. complete as per standard specification.

Plastering with Cement Mortar 1:3 Mix ( One Cement and Three Sand) 10mm thick including cost and conveyance and all labour charges etc.complete as per standard specification.10 M2

Plastering with Cement Mortar 1:5 Mix ( One Cement and Five Sand) 12mm thick including cost and conveyance and all labour charges etc. complete as per standard specification. 10 M2

Paving the floor with pre-polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.

Manufacturing supplying and fixing of MILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers.

Supply and fixing of lightpoint, plug point and fan points etc. completed as per standard specification.

Supply and fittings Tube Lights etc,. completed as per standard specification.

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification

KS & Co (BID ID -1323530)