Electrical works for Dhansirinagar Township of NRL, Numaligarh

Amount

SITC- Electrical Works:

Supply, Installation, Testing and Commissioning of 6.6kV SWGR as per technical specifications attached with the tender and as per direction of E-i-C. Bidder shall submit as built drawings of the HV SWGR during commissioning of the system. All relevant test reports (site reports and manufacturers test reports) shall be submitted by the bidder. Kindly refer attached drawings for Line Differential CT and Transformer protections: 1. 6.6kV SLD showing incoming feeder to the HV SWBD. Line differential relay make and model( Schneider make, model P543)with auxiliary voltage 24-32V dc. 2. 6.6/0.433 kV Distribution Transformer datasheet. Bidder to perform Primary injection and secondary injection during commissioning of the SWBDs.

Supply, Installation, testing and commissioning of 180 AH capacity, 24VDC lead acid Batteries in fully charged condition, each set comprising of 12 nos. batteries of 2 volts each or 2 x 12 volt, 25 plate, including painted MS stand & spill proof trays, hydro meter,aprons etc. complete etc. as required and as per direction of E-i-C.

Supply, Installation, Testing & Commissioning of DC Distribution Board comprising 1 no. 63A DP MCB as incomer & 6 nos. 32A DP MCB as outgoing feeders for DC supply for operating control devices of HT & LT panels and as per direction of E-i-C.

Supply and laying of gravel at transformer yard and as per direction of E-i-C.

Supplying, installation, testing & commissioning of 'B' Class MS Pipe exhaust piping / chimney up to top level made out of suitable dia M.S piping complete with bends, duly painted with primer and insulated with 50 mm thick layer of LRB rock wool having 100 kg / m density, white wool. Finishing of the insulation shall be with chicken wire mesh and 26 kg. Aluminium sheet cladding all around exhaust pipe provided with self tapping screws complete as required. 250 mm Dia Pipe - 4.85 mm Thickness

Supply & Fixing of 75mm Thick Compressed Mineral Wool Insulation for DG Exhaust Pipe With 24 Gauge Aluminium Sheet Cladding etc. as Required for The Under Mentioned Dia Pipe. 250 mm Dia Pipe (Insulation)

Supply , installation, testing, design, manufacture, inspection, handling, assembling, affecting proper connections, testing and commissioning of 415V LT Panel as per specifications provided in the tender document. Bidder to carry out primary injection test and secondary injection test during commissioning of the panel.

Supply and spreading of fine river sand/stone dust in cable trenches etc., including all labour and materials as per direction of EIC.

Supply and spreading of bricks of 75mm thickness in cable trenches for cable protection including all labour and materials as per direction of EIC.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm(IS:2551), made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Providing and fixing H.T. danger notice plate of 250 mm X 200 mm(IS:2551), made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides, and with inscription in single Red colour on front side as required.

SITC of Fire Bucket stand made of M S angle suitable for and with 4 Nos Fire Buckets of 9.5 Ltrs. Capacity

SITC of cable route marker

SITC of ANTI SKID RUBBER MAT of 11kv grade 3mm thick ISI - 15652 marked

SITC of Battery operated emergency light with in built charging facility and shall be on once the normal power is off and shall also work during the normal power on.

Supply and installation of chequered plate of M.S. 6mm thick-supply, fabrication and installation for covering floor cut -out/cable trenches etc. including all labour and materials as per EIC

Supplying, providing and constructing GI Pipe Earth electrodes as Per IS:3043; GI Pipe Medium Class'B' 65 mm Dia; 3 m long complete with Earth Pit and all necessary materials including excavation of Earth Pit, filling with homogeneous layer of Charcoal and salt, Back filling, providing necessary Brick Masonry work, Plastering, MS/CI cover; Test links for connecting the earth Grid and Earth Electrode . This also includes testing of Earth resistance after completion as per Indian Electricity Rules. Minimum depth of burial shall be 3 m, homogenous hygroscopic material should not be less than 1 cum.& should cover 300 mm around the electrode up to a height of 2500 mm.The scope of work also includes providing earth pit markers indicating resistance, test date, next due date etc.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 8 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing earth bus of 50 mm X 5 mm GI strip on surface for connections etc. as required.

Providing and fixing 75 mm X 10 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and laying non pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixtures of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete

Providing and laying non pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixtures of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. (Cable Tray Bends as per Requirement)

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. (Cable Tray Bends as per Requirement)

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. (Cable Tray Bends as per Requirement)

Design, supply, fabrication and erection of steel structure from channel /angle iron of suitable sizes to support the Cable trays complete as required. Tenderer shall guarantee structure stability made under all site conditions. The supporting structural itmes like angle channel, threaded rods, shall be complete, 2 layers of anti-coating primer with 2 layers of paint etc. complete as required.

Supply , Installation, Testing & Commissioning of Integrated Post Top Lantern With 40W LED Lamp including Pole & connection with 3 x 2.5 sq.mm single core PVC insulated copper conductor cable from junction box to fixture as required. Havell's Cat no : RUBYPT40W LED757PSYMTOPC or Equivalent.

Supply , Installation, Testing & Commissioning of 60 W LED with complete with pot optic reflector connection with 3x2.5sq.mm single core PVC insulated copper conductor cable from junction box to fixture as required. Havell's Cat no : ENDURAPEARLPLUSSL60WLED757SASYTOPC or Equivalent.

Supply , Installation, Testing & Commissioning of 35 W LED with complete with pot optic reflector connection with 3x2.5sq.mm single core PVC insulated copper conductor cable from junction box to fixture as required. Havell's Cat no : ENDURACITYLITEPLATPLUSSL35WLED757SASYBOPC or Equivalent.

Supply, Installation, Testing and Commissioning of 200x160x98 (KVPC) Polycarbonate thermoplastics enclosure - junction box with I.P - 65 Protection with Terminals & cable hinged cover of approved design complete having gasket of internally embedded & made of polyeutherene & should be weather proof, rust proof, dust proof, water proof - box shall be tested as per IEC - 60670-2/60670-22. the box shall have self threaded holes & provision for mounting din rail. with 2 Nos cable gland including supplying & fixing crimping 2 nos lugs & 1 nos 32A connector 6 way for looping the incoming & outgoing cables and also connection of the street light one 6A SP MCB Including Connection of 2x6 sqmm Cable etc as Required.

Supplying and Fixing of 1.0 Meter Single Arm Bracket with Suitable Angle Having Triangular Stiffener of Size 100x50x5 mm Thick Complete With Nut Bolts etc at a Height of 8/4 mtr. Complete as Required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 core 2.5 sq.mm (for 9.5/4.5 Mtr Poles)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 Sq.Mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate,suitable GI box and earthing the point with 1.5 Sq.Mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of PVC insulated, copper conductor single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.

Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps. modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps. modular switch, connection etc. as required.

Supplying and fixing 25 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 25 A, “C” curve, TP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' Curve, miniature circuit breaker (MCB)suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. single pole

Supplying & fixing single pole, blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following way, horizontal type Three Pole and Neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) 4 way (4 + 12), Double door

Supplying and fixing following way, Single Pole and Neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way, Double door

Supplying and fixing following rating, Double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. 40 Amps

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. 40 Amps

S/F 40W LED TUBE LIGHT Havell's Cat no : LHEYBYP7OE1W040 or Equivalent.

S/F 10 W LED BULKHEAD Havell's Cat no : LHEXCGP7PN5W010 or Equivalent.

Supply & fixing of AC 230/250 volts, 50 HZ ceiling fan with standard down rod, blades, 2 nos. caps & regulator etc. ISI marked complete as required. 1200 mm sweep (ES-50 Premium 5*)

Supply & fixing of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete (Make : Bajaj / Crompton / Havells)

Supply & fixing of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete (Make : Bajaj / Crompton / Havells)

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape , Hole Seeling to be done complete as required. 32 mm dia

Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required.

Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required.

Supply and making Indoor cable end jointing with cast resin compund, including lugs and other jointing materials for following size of 3 core, XLPE aluminium conductor cable of 6.6 KV (UE) grade as required. 2 x 1 C x 630 Sq.mm 6.6 KV (UE )

Supply and Making Straight Through Cable Jointing With Cast Resin Compund, Including Ferrule & Other Jointing Materials for Following Size of 3 core, XLPE Aluminium conductor cable of 6.6 KV( UE )grade as required. 2 x 1 C x 630 Sq.mm 6.6 KV(UE )

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 65 mm dia

SITC of Lightning Protection System:

Supply and installation of Vertical Aluminium Lighting Arrester of 16MM dia, 1000 mm long with Gun Metal base plate.

Supply and installation 8 mm round aluminium conductor for horizontal lightning protection - run in roof.

Supply and installation of roof conductor holder for 8 mm round aluminium conductor made of Gun Metal for horizontal installation. The distance between each holder should be min of 1 mtr.

Supply and installation of T connector for connecting of 8 mm Al round conductor . The connector should be of Gun Metal with SS nuts and bolt.

Supply and installation of Cross connector for connecting of 8 mm Al round conductor. The connector should be of Gun Metal with SS nuts and bolt.

Supply and installation of Expansion piece along with connector to compensate the expansion of round 8 mm Al conductor when temperature variation. Connection should be in every 20 mtr.

GLUE- Glue is used to fix roof conductor holder on roof.

Supply and installation of 8 mm round aluminium conductor as a down conductor mounted in the surface of wall which will carry the lightning current to earth pit.

Supply and installationof Down conductor holder made of SS 304 for 8 mm round aluminium conductor of min distance between the wall to the conductor. The distance between each holder should be min of 1 mtr.

Supply and installationof straight connector for connecting of 8 mm Al round conductor. The connector should be of Aluminium with SS nuts and bolt.

Supply and installation of 7 digit lightning strike counter.

Supply and installation of Test Joint Point for 25X3MM CU STRIP , the size should be of 25 x 3 x 150 mm copper in ABS boxes.

Supply and installation of advance chemical gel earthing system for the proper dissipation of fault / leakage current to the ground and ensure the continuous electrical connectivity and proper functioning to the electrical system. The earth rod shall be of UL listed & CPRI tested 3 meter long 17.2 mm dia 250 microns copper bonded steel rod with the connecting clamp (ss - rod to tape). The UL listed copper bonded rod also should be tested & ceritifed from CPRI for a short circuit current of 46 KA or more. The UL listing shall be punched / engraved on the rod for the physical verification at site. The engravings shall contain the following details - UL Control number, Dimension details of the rod, Product model number & UL certificate reference number as per detailed technical specification attached. To ensure the electrical conductivity, 50 Kgs (per pit) or more resistance grounding minerals per earth pit / earth rod shall be used along with the copper bonded rod. As per IEEE 80-2013 (Clause 14.5 d), the grounding minerals shall be tested & certified for the resistivity of less than 0.12 ohm-mtr. The grounding minerals should be ROHS certified to ensure it does not pollute the ground water as per technical specification attached.

GI STRIP (25X6 MM) - FOR EARTHING INTERCONNECTION

ITC-Electrical Works:

6.6 KVTRANSFORMER (6.6 KV /433 V) (2000 KVA) Instaltion, testing and commissioning of the following trasnformer, excluding construction of fundation, inclduing transporation of the trasnformer from stock/ yard to site at the place of instaltion, unpacking, positioning on plinth, site assembly of loosely furnished accessories, placing on the foundation, replacement of silica gel, connection of primary and secondary sides, phase checking, meggering, HV tests, touch up ofpaint, including connecitng auxilairy circuits, inclduing fixing of nuts and bolts, etc, filling / top up of oil , provising stoppers of the wheels, etc including all labour and materials, as per approved drawings, specifications ofo the tender, and as directed by Engineer in charge.Lifting from owners issue point to the place of instaltion wit contracotrs own lifting arrangements is part of contracctors scope. Aslo any assitannce requried to client for any approvals shall be contractors scope of work. The contractor shall carry out trasnformer filteration as part of installtion/commissioning to bring the oil dieelectric strnegth to the deisred value as per the latest indian standards. Steam line filter machine and oil kit tobe arranged by thecontrctor on his own cost Before performing any activity( eg. Testing / commissioning/oil filteration etc) conractor must/shall submit the complete the procdure to Engineer - in -charge for his review.Also any other activitities rewquired to complete the work & not specifivally menined here udner shall be contractor's scope of work only.Also any assistance required from the MANUFATURER'S supervisor at site site during any of the abvoe activites are also included in the contracgtors scope of work only.

500 KVA DG SET Installation, Testing & Commissioning of 500 KVA Capacity Radiator cooled DG Set with suitable capacity engine directly coupled with alternator for 415 volt, 3 phase, 50 Hz, 4 wire, Generation system complete with accessories, Fuel Oil Tank & Control Panel etc as Required and sound proof acquastic enclosure for the DG SET (75 db @ 1m) , including supply, fixing of antivibration pads suitable for 500 KVA DG Set as per standards of Engine manufacture, provision of conrol cable from engine to control panel to engine. Provision of pipe fuel pipe line of suitable size from fuel tank to engine and over flow pipe engine to fuel tank complete gate valve and fitting leader maker etc. Supply, Intallation of starting batteries of suitable AH as recommended by manufacterer Heavy duty complete as required at site complete with stand and battery charger residentials silencer sutaible for diesel engine exhaust pipe line complete complete flange, bend, flexible pipe all as required and as directed by Engineer Incharge.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre

Laying of One Number PVC Insulated And PVC Sheathed / XLPE Power Cable of 1.1 kV Grade of Following Size Direct in Ground as per direction of EIC

Laying of One Number PVC Insulated And PVC Sheathed / XLPE Power Cable of 1.1 kV Grade of Following Size Direct in Ground as per direction of EIC

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 6.6 KV(UE) grade of following size direct in ground as per direction of EIC Cable laying OD above 40mm

Excavation and backfilling of trenches etc in all types of soil (except rock), shoring,shuttering and dewatering (if necessary) including consolidation and disposal of surplus earth upto a distance of 100 metre including all labour and materials complete as per approved drawings, specifications and direction of Engineering in charge.(Excavated trench dimentions shall be measured)

Supply Items:

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required.

Supply & Testing of following 6.6 KV( UE) grade multicore Aluminium conductor XLPE insulated cable, insulation screening with extruded semi conducting compound in combination with copper tape armoured cores laid up, inner sheath of PVC tape, galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - II) and complete with all latest amendments etc. complete as required.

Supply of discharge rod with earthing facility suitable for 11kv voltage system as per applicable latest Indian standards/CEA regulation

Supplying of 9.5 mtr long hot dip Galvanized octagonal Pole with top of the pole 70 mm dia (A/F) and bottom of the pole 130 mm dia (A/F) made out of 3mm sheet with MS base plate of size 200mm (NS) x 200mm (NS) x 16mm (NS) on precast RCC foundation complete with suitable size opening inside the pole with flush weather proof door with locking facility preferably with LN key having proper arrangement with Accommodating of 1 Nos. 6 Amp.,10 KA MCB & neutral link 4 way connector suitable for 25 Sqmm cable complete with electrically safe including inside cable termination with thimbles i/c wiring from pole box to fitting with 3x1.5 sq.mm. FRLS PVC insulated copper conductor wire, earth connection, din channel, earth stud and other accessories pertaining to this pole (But without street light fitting) etc as reqd.including providing & laying in position suitable RCC foundation as required for 8 mtr. octagonal hot dip Galvanized Pole as per Manufacturers drawing with 1:1.5:3 concrete (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including excavation of all kind of earth such as all type of soil/soft rock or hard rock etc. as per existing site condition i/c providing, cutting, bending and placing reinforcement & Including J type foundation bolts , anchor plate and templates in position as per manufacturer Standard and Providing PVC Pipe for Cable Entry and Exits Including Disposal of Surplus Malba / Softrock / Hardrock Stone etc.as Required.

Supplying of 4.5 mtr long hot dip Galvanized octagonal Pole with top of the pole 70 mm dia (A/F) and bottom of the pole 130 mm dia (A/F) made out of 3mm sheet with MS base plate of size 200mm (NS) x 200mm (NS) x 12mm (NS) on precast RCC foundation complete with suitable size opening inside the pole with flush weather proof door with locking facility preferably with LN key having proper arrangement with Accommodating of 1 Nos. 6 Amp.,10 KA MCB & neutral link 4 way connector suitable for 25 Sqmm cable complete with electrically safe including inside cable termination with thimbles i/c wiring from pole box to fitting with 3x1.5 sq.mm. FRLS PVC insulated copper conductor wire, earth connection, din channel, earth stud and other accessories pertaining to this pole (But without street light fitting) etc as reqd.including providing & laying in position suitable RCC foundation as required for 4 mtr. octagonal hot dip Galvanized Pole as per Manufacturers drawing with 1:1.5:3 concrete (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including excavation of all kind of earth such as all type of soil/soft rock or hard rock etc. as per existing site condition i/c providing, cutting, bending and placing reinforcement & Including J type foundation bolts , anchor plate and templates in position as per manufacturer Standard and Providing PVC Pipe for Cable Entry and Exits Including Disposal of Surplus Malba / Softrock / Hardrock Stone etc.as Required.

Supply of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board with supply of all material labour T & P etc for proper completion of work. (Approx front area = 1.20 sq M)

Supply of First aid box as approved by Indian red cross conforming to IS : 2217.

Supply of CO2 Fire Extinguishers 4.5 kg capacity complete in all respect ISI : 15683 marked

Supply of ABC FIRE EXTINGUISHER 4 KG capacity complete in all respect ISI : 15683 marked

Supply of of rubber gloves of 11 KV grade as per IS : 4770.

Supply of SS Bellow.

CEIG/CEA/Satutory approval:- Reimbursement item- Not to be quoted

Item not to be quoted by the bidder. The prescribed statutory fees for obtaining CEIG/CEA/Statutory approvals & inspection if paid by contractor shall be reimbursed by owner at actual on submission of documentary evidence on certification of EIC.

M/S Nityananda Borah (BID ID -3104827)

HABIBAR RAHMAN (BID ID -3099158)

Miraj Instrumentation Services I Pvt. Ltd. (BID ID -3105219)

M/s SterlingElectro Enterprises.P.Ltd (BID ID -3105189)

Konstelec Engineers Limited (BID ID -3105303)

B.R.Construction (BID ID -3105538)