CA NO. GE (P) AF/GUR-64/2020-21 ANNUAL/MAINTENANCE CONTRACT FOR FIRE FITTING, FIRE ALARM, AMR ELECTRIC ENERGY METERS AND OTHER MISC ITEMS IN 13 BRD AND 16 BRD AT AF STATION PALAM UNDER GE P AF GURGAON

Amount

M&L for AMC for single phase AMR meter software hosting, GPRS Charges, meter calibration testing with multimeter, RF network monitoring and trouble shooting and repair/replacement of meter parts with manufactruing defect complete all as specified and as directed by Engr-in-charge.

M&L for AMC for three phase AMR meter software hosting, ,GPRS Charges, meter calibration testing with multimeter, RF network monitoring and troubleshooting and repair/replacement of meter with manufactruing defect complete all as specified and as directed by Engr-in-charge.

Comprehensive monthly maintence of auto fire alarm system installed in 16 BRD AF Stn Palam. The detail scope of work consists of the following :- (i) Cleaning inspecting, checking and repairing if required all the equipments of fire detection system. (ii) Operational test of all the equipment of fire detection system in presence of rep of users and Engr-in-charge. (iii) The contractor shall submit test report regarding functioning of all the equipments duly signed by contractor, users rep and Engr-in-Charge on monthly basis. (iv) The maintenance shall be carried out through manufacturer representative or his authorised Rep. (v) Emergency visit shall be carried out when called in addition to the normal monthly maintenance in case of any failure in the system due to any cause without additional cost. (vi) Material required for replacement shall be measured and paid separately under respective items of this schedule as 'Supply and fixing' and labour component for the same is not included in comprehensive maintanance contractor shall quote the rate accordingly. (vii) Testing of entire fire alarm system and rectification of fault complete to the entire satisfaction of engr-in-charge all as specified and directed .

Supply and installation in replacement of response indicator lamp complete all as specified and as directed.

Supply and installation in replacement of 12 volt 7 AH maintenance free battery complete all as specified and as directed. Make - Exide /Ameron/ Luminous/ Amco

Taking down of old unserviceable optical type smoke detector and supply, fixing and testing of detectors complying with and type certified to EN-45 adjustable type smoke detector Photo electric / Optical with base with self built intelligence as per IS: 11360 complete all as specified and directed . Make Cooper/Honeywell/Ravel/Apollo

Supply and fixing in replacement of mother board suitable for Fire alarm system complete all as specified and directed. Of existing Make : Agni

Supply and fixing in replacement of Power Supply card suitable for Fire alarm system complete all as specified and directed. Of existing Make : Agni

Supply and fixing in replacement of manual call point resettable type of existing make complete all as specified and directed.

Supply and fixing in replacement of electronic sounder cum strobe of existing make, size and capacity complete all as specified and as directed.

Supply and fixing in replacement of Repeater Panel 08 Zone of existing make, size and capacity complete all as specified and as directed.

Supply and fixing in replacement for 1.5 sqmm single core PVC insulated sheathed ISI marked FRLS copper conductor multi stranded 1100 volt grade cable drawn through existing conduit connecting and testing all as specified and directed. Make: Kalinga/ Polycab/ Finoles / Havells

Supply and fixing in replacement of Heat Detector with Base complete all as specified and as directed. Make : Apollo/ Honeywell/Ravel/ Copper

Comprehensive monthly maintence of Fire Hydrant system installed 16 BRD AF Stn Palam. The detail scope of work consists of the following :- (i) Cleaning inspecting, checking and repairing if required all the equipments of fire hydrant system. (ii) Operational test of all the equipment of Fire Hydrant system in presence of rep of users and Engr-in-charge. (iii) The contractor shall submit test report regarding functioning of all the equipments duly signed by contractor, users rep and Engr-in-Charge on monthly basis. (iv) The maintenance shall be carried out through manufacturer representative or his authorised Rep. (v) Emergency visit shall be carried out when called in addition to the normal monthly maintenance in case of any failure in the system due to any cause without additional cost. (vi)Testing of entire piping network and rectification of leakage as requirement at site complete to the satisfaction of engr-in -charge and all as directed. (viii) Material required for replacement shall be measured and paid separately under respective items of this schedule as 'Supply and fixing' and labour component for the same is not included in comprehensive maintanance contractor shall quote the rate accordingly. (viiI) Checking of fire hyrant system and rectification of fault all as specified and directed by Engineer-In - Charge

Comprehensive monthly maintence of auto fire sprinkler system installed in 16 BRD AF Stn Palam. The detail scope of work consists of the following :- (i) Cleaning inspecting, checking and repairing if required all the equipments of fire sprinkler system. (ii) Operational test of all the equipment of fire sprinkler system in presence of rep of users and Engr-in-charge. (iii) The contractor shall submit test report regarding functioning of all the equipments duly signed by contractor, users rep and Engr-in-Charge on monthly basis. (iv) The maintenance shall be carried out through manufacturer representative or his authorised Rep. (v) Emergency visit shall be carried out when called in addition to the normal monthly maintenance in case of any failure in the system due to any cause without additional cost. (vi)Testing of entire piping network and rectification of leakage as requirement at site complete to the satisfaction of engr-in -charge and all as directed. (vii) Material required for replacement shall be measured and paid separately under respective items of this schedule as 'Supply and fixing' and labour component for the same is not included in comprehensive maintanance contractor shall quote the rate accordingly. (viii) Checking of sprinkler system and rectification of fault and live testing by generating heat and bursting sprinkler at particular area complete all as specified and directed by Engineer-In - Charge

Supply and fixing in replacement of sprinkler Quick / Early response type as per IS 15105 / TAC guide lines, 79 degree temperature rating pendant type complete all as specified and directed.

Supply and fixing in replacement of Pressure switch of existing make and capacity complete all as specified & directed

Supply and fixing in replacement of stainless steel Single headed hydrant valve 63 mm dia, ISI marked of existing make complete all as specified and as directed.

Supply and fixing in replacement of RRL hose pipe ISI marked 15 mtr length, type A complete all as specified and as directed.

Supply and fixing in replacement of stainless steel Male Coupling of existing make complete all as specified and as directed.

Supply and fixing in replacement of stainless steel Female Coupling of existing make complete all as specified and as directed.

Supply and fixing in replacement of Short stainless steel pipe of existing make complete all as specified and as directed.

Supply and fixing in replacement of brass Nozzle for 20 mm pipe of existing make complete all as specified and as directed.

S&F for external hose box (in repair) made of 18 gauge MS Sheet 800X 600X250mm with double door with 4 mm thick glass and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard complete all as specified and directed.

Supply and fixing in replacement of MS ERW pipe C class of 150 mm dia including jointing and testing as per manufacturer's instructions complete all as specified and as directed.

Supply and fixing in replacement of MS ERW pipe C class of 100 mm dia including jointing and testing as per manufacturer's instructions complete all as specified and as directed.

Supply and fixing in replacement of MS ERW pipe C class of 80 mm dia including jointing and testing as per manufacturer's instructions complete all as specified and as directed.

Supply and fixing in replacement of GI pipe C class of 25 mm dia including ISI marked GI fittings and testing complete all as specified and as directed.

Supply and fixing in replacement of GI pipe C class of 20 mm dia including ISI marked GI fittings and testing complete all as specified and as directed.

Supply and fixing in replacement ISI Marked, of approved quality, 100mm size cast iron non butterfly valve, both ends flanged jointed and tested including taking down old valve complete all as specified and directed of make Zoloto/L&T / Kartar.

Supply and fixing in replacement ISI Marked, of approved quality, cast iron 150 mm Sluice valve, both ends flanged jointed and tested including taking down old valve complete all as specified and directed of make Zoloto/ Kirloskar/ Leader/Kartar.

Supply and fixing in replacement ISI Marked, of approved quality, cast iron 100 mm Sluice valve, both ends flanged jointed and tested including taking down old valve complete all as specified and directed of make Zoloto/ Kirloskar/ Leader/Kartar.

Supply and fixing in replacement ISI Marked, of approved quality, cast iron 80 mm Sluice valve, both ends flanged jointed and tested including taking down old valve complete all as specified and directed of make Zoloto/ Kirloskar/ Leader/Kartar.

Supply and fixing in replacement of PVC conduit with all accesorries including taking out of old conduit complete all as specified and as directed.

M&L for removing of lubricating oil from chamber and oil filter chamber of the diesel driven pump and cleaning of oil chamber & filter chamber thoroughly to remove all types of deposits and supply & filling of new lubricant oil SAE 20 W/40 W at required level complete all as specified and as directed.(Indian oil /BPL).

Supply and fixing in replacement of Element lub oil filter complete all as specified and as directed. Make:Mico/Fuel guard/Kirloskar/ Cummins/ Bosch

Supply and fixing in replacement of Fuel filter complete all as specified and as directed. Make:Mico/Fuel guard/Kirloskar/ Cummins/ Bosch

Supply and fixing in replacement of Coolant filter complete all as specified and as directed. Make:Mico/Fuel guard/Kirloskar

Supply and fixing in replacement of Element Air cleaner complete all as specified and as directed. Make:Mico/Fuel guard/Kirloskar/ Cummins/ Bosch

Taking out old damaged fuel Tank Capacity 200 Ltrs with fuel pipe from DG PUMP set and Supply and fix new fuel tank of 200 Ltr capacity with fuel pipe complete all as specified and as directed by Engineer-in-Charge.

Taking out motor from the system carrired out motor to work shop , Rewinding of Motor Rating 50-60 HP with copper enameled wire, refixing and testing the motor complete all as specified and as directed by Engineer-in-Charge.

M&L for Spray Painting of Pump with Motor capaicity 60 HP with synthetic enamel paint including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L in Spray Painting of Jockey Pump with Motor capaicity 10 HP with synthetic enamel paint including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L in spray Painting of Pump with DG Set capaicity 50 HP with synthetic enamel paint including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L in replacement of Battery lead with Brass terminal complete of appropriate size as per site complete all as specified and as directed by Engineer-in-Charge.

M&L in replacement of 5000 Ltr Triple layer ISI marked PVC Tank including tank neeples of 40 to 50mm size and taking down existing unserviceable tank complete all as specified and as directed by Engineer-in-Charge. Make : Sintex or as specified in list of makes.

M&L in replacement of 25 mm Gun Metal gate Valves complete all as specified and as directed by Engineer-in-Charge. Make: Kartar/ Zoloto/Leader.

M&L for Painting to150 mm pipe with synthetic enamel paint including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for Painting to100 mm pipe with synthetic enamel paint including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for Painting to 80 mm pipe with synthetic enamel paint including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for Painting to 200 mm pipe as in header with synthetic enamel paint including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement ISI Marked, of approved quality, 150mm cast iron non return valve, both ends flanged jointed and tested including taking down old valve complete all as specified and directed. Make : Kartar/Leader/Kirloshkar.

Supply and fixing in replacement ISI Marked, of approved quality, 100mm cast iron non return valve, both ends flanged jointed and tested including taking down old valve complete all as specified and directed. Make : Kartar/Leader/Kirloshkar.

Supply and fixing in replacement ISI Marked, of approved quality, 80mm cast iron non return valve, both ends flanged jointed and tested including taking down old valve complete all as specified and directed. Make : Kartar/Leader/Kirloshkar.

Supply and fixing in replacement of Heavy duty threaded / welded MS or GI Flange with rubber gasket 150 mm complete all as specified and as directed.

Supply and fixing in replacement of Heavy duty threaded / welded MS or GI Flange with rubber gasket 100 mm complete all as specified and as directed.

Supply and fixing in replacement of Heavy duty threaded / welded MS or GI Flange with rubber gasket 80 mm complete all as specified and as directed.

Supply and fixing in replacement ISI Marked, of approved quality, 100mm cast iron Foot valve, with flanged jointed and tested including taking down old valve complete all as specified and directed. Make : Kartar/Leader/Kirloshkar.

M&L for Cleaning of 25000 Gallon Tank with 6 Stage Cleaning Method STAGE 1: Dewatering the water with Mechanical electric Pump STAGE 2 : Clean the sluge from wall and floor of sump STAGE 3: High pressure cleaning with special pump STAGE 4: Suction with Industrial Vaccum Cleaner STAGE 5 : Anti bactrial Spray on wall and Floor of Sump( Test Certificate Of Chemical Must be Provided That chemical is safe for Humans) STAGE 6: UV Radiation for disinfect from the bactrial envoirment (Note: This work done by Specialist Agenceis of water treatment) complete all as specified and as directed.

M&L for Cleaning of 5000 Ltr Tank with 6 Stage Cleaning Method STAGE 1: Dewatering the water with Mechanical electric Pump STAGE 2 : Clean the sluge from wall and floor of sump STAGE 3: High pressure cleaning with special pump STAGE 4: Suction with Industrial Vaccum Cleaner STAGE 5 : Anti bactrial Spray on wall and Floor of Sump( Test Certificate Of Chemical Must be Provided That chemical is safe for Humans) STAGE 6: UV Radiation for disinfect from the bactrial envoirment (Note: This work done by Specialist Agenceis of water treatment) complete all as specified and as directed.

Comprehensive monthly maintence of 3 X 30 KVA UPS system installed in 13 BRD AF Stn Palam. The detail scope of work consists of the following :- (i) Execute diagnostics and physical checks. (ii) Examine, clean, test, all equipment as required and repair parts as and when required. (iii) Measurement of UPS parameters like input/output voltage, frequency, current, frequency, room temperature etc. (iv) Battery Parameters like voltage, current and other relevant parameters. (v) Ensure dust free and controlled temperature conditions. (vi) The corrective maintenance may require multiple visits to site (vii) Check all Equippment LED LCD display board. (viii) Check MCB/MCCB (ix) Check battery fuse Note : Response time shall not be more than 24 hours from the time of receipt of complaint on any working day between 9 AM to 6 PM in case of delay penality of Rs.1000/- per day shall be charged from contractor's dues.

Note:- The amount of Rs 27,763/- against Schedule of Credit on Page No 104 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

SANWARIYA ENTERPRISES

Continental Engineers and contractors