GE/BAS-73/2022-23 SPECIAL REPAIR TO BLDG NO. T 09 Ors TOILET AND BATHROOM OF BDE CAMP AND ADDN ALTR FOR FIRING RANGE BLDG NO T 04 AT BASOLI MIL STATION UNDER GE BASOLI

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and as directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet used instead f plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and as directed.

S&F factory made solid panel PVC door shutter (factory made) 28 to 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frames shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet strip of 20 mm thick width stuck inside in solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail : Paneling of wood grain printed PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with 5mm x 15mm wide PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing, complete all as specified and as directed.

S&F Stainless steel 100 mm long Butt hinges, complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed in location, complete all as specified and as directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed.

Demolitin of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and precast concrete articles, complete all as specified and as directed.

M&L Brick work with old size bricks, straight of curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L Brick work (Except bricks) with old size bricks , straight of curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed. Note:- Old bricks obtained from demolition/dismantling shall be reused in work as directed.

M&L for Half brick thick Brick work with old size bricks, straight of curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement with three coats of white wash on newly plastered surface including preparation of surfaces, complete all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L Hard core of broken brick bats gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a true surface, complete all as specified and as directed.

M&L 75mm thick Plain Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in subbase to flooring , paving or pathway or plinth protection laid in slope finished even and fair complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in coloured cement inclscreed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete all as specified and as directed.

M&L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete all as specified and as directed.

M&L 75mm thick RCC precast slab laid at site and fixed over half brick wall finished with 18 to 20mm thick machine cut colour Granite stone slab as in plateforms fixed laid on 20mm thick screed bed cement mortar ( 1:4 ) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc including taking down of existing steel tubing and connections complete all as specified and as directed.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc including taking down of existing steel tubing and connections complete all as specified and as directed.

M&L for Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, in reapirs complete all as specified and as directed.

S&F in repair CP long body Bib tap for 15 mm bore pipe, cast copper alloy screwed down crutch butterfly handle with brass furrelo , complete all as specified and as directed.

S & F Vitreous china wash basin counter type size 550 x 400 mm with CP waste coupling 40 mm size full thread , including 50 mm dia PVC (SWR) pipe with bends & fixing clamp fixed to wall for waste pipe and fixed on RCC precast slab finished with granite complete all as specified and as directed.

S&F 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked add if fixed in repairs complete all as specified and as directed.

S&F in repair towel rail CP 600 mm long, complete all as specified and as directed.

S&F in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern (including fixing of flush pipe) including provision of cement concrete bedding, with PVC flushing cistern 10 ltr capacity & PVC connection fixed in repair and including dismantiling of existing WC with fitting complete all as specified and as directed.

S&F Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia PVC ball valve high pressure with polythene float and dismantling of existing RCC/ PVC tank of any capacity complete all as specified and as directed.

S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore, complete all as specified and as directed.

S&F PVC(SWR) pipes 110mm bore, single socketd , in any length with rubber ring joints , in any length fixed to walls, complete all as specified and as directed.

S&F PVC (SWR) bend any radius 110mm dia bore, complete all as specified and as directed.

S&F 110 PVC (SWR) 110mm bore 'P' or 'S' traps, complete all as specified and as directed.

S & F 110mm PVC (SWR) Vent cowls, complete all as specified and as directed.

S&F in repair PVC floor trap 100 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified and as directed.

Excavation in trenches in any type of soil not exc 1.5m wide and not exc 1.5m in depth and getting out any type of soil complete all as specified and as directed.

Returning, filling in, soil including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and as directed.

Removal of excavated material as soils not exceeding 50m and at a level not exceeding 1.5m above the starting point and depositing complete all as specified and as directed.

S&F Precast factory made RCC manhole cover with MS Flat/Angle Iron manhole cover size 900mm x 600mm x 75mm with two cups handles for lifting the manhole cover conforming to IS- 12592 complete all as specified and as directed.

M&L for Reinforced concrete pipes, class NP2 grade 'A' drain pipes 200 mm bore laid and jointed on concrete bed, complete including testing etc complete all as specified and as directed.

M&L for concrete bed to drain pipes including benching under and haunching in cement concrete 1:3:6 type C2 for 200 mm dia pipe complete all as specified and as directed.

M&L PCC 1:2:4 type ‘B1’ (using 20mm graded stone aggregate) in coping, benching of manholes etc and including necessary formwork and including demolitions of existing concrete wherever required complete all as specified and as directed.

M&L cutting into existing manholes (150mm dia pipe) for connecting new drains,making good to pipe and rendering,cutting out existing benching for and forming branch cahnnel(1/2 round or 3/4 section) incement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantiling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed

M&L for MS work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS-1239 (Part I-1990) or in gates or ladders of angle Iron or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Dorrs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging dooe fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Gde Fe 410-O or Fe 310-O complete all as specified and as directed.

M&L for preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer.complete all as specified and as directed.

Surrface excavation n. exc.30 deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and as directed.

M&L Cement concrete (1:3:6) type C-2 (Nominal mix) using 40 mm graded crushed stone aggregates in foundation filling and mass concrete, complete all as specified and as directed.

M&L for Brick work with old size brick, curved or straight on plan exceeding 6m mean radius built in CM 1:4, complete all as specified and as directed.

M&L for half brick thick Brick work with old size sub class 'B' brick straight or curved on plan with any radius built in CM 1:4, complete all as specified and as directed.

M&L for RCC M-25 ( using 20 mm graded crushed stone aggregate) Design mix, as in foundation, including raft footing, foundation bases for columns complete all as specified and as directed.

M&L for RCC M-25 (using 20 mm graded crushed stone aggregate) Design mix in Walls, retaining walls, basement walls, ballast walls and the like; any thickness above top of footing including attached pilaster and buttresses, in columns , pillars, piers, posts and struts etc. complete all as specified and as directed.

M&L for TMT bars 10 mm dia & over cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or seuring with chip with deep quality confirming to FE 500/FE 500D, complete all as specified and as directed.

M&L for TMT bars 5 mm dia & over upto and including 10mm dia cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or seuring with chip with deep quality confirming to FE 500/FE 500D, complete all as specified and as directed.

M&L Form work to sides of concrete fdn footing base of columns and raft beams sides and soffits (if any) of plinth beams, complete all as specified and as directed.

M&L Form work to sides of pillars, posts, struts, pier, columns square, rectangular or polygonal rough finished surface of concrete, complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement incl two coats of cement base paint on newly plastered surfaces of walls including preparation of surfaces complete all as specified.

M& L for filling of Moorum in backside of retaining wall including spreading, levelling well ramming in layers n.exc 15cm thick each layers with watering complete all as specified.

M&L Boulders filling dry, handpaked thightly in baskside of retaing wall in front of 75 mm bore, PVC pipes for drainage of water through weep holes complete all as specified and as directed.

S&F, 75 mm bore, PVC pipes single socketed, in any length fixed or laid in wall casting of RCC for weep holes complete all as specified and as directed.

M&L PCC 1:2:4 type ‘B1’ (using 20mm graded stone aggregate) in coping, benching etc and including necessary formwork complete all as specified and as directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for upto any height and any thickness (below or above ground level) and removing all the demolished material outside cantt area, complete all as specified and as directed.

M&L hand packing of Stone boulders(any thickness) tightly as in wire crate apron bunds etc. and raising (or lowering) to the required level all as directed and specified

S&F, 4mm dia galvanised steel wire, 150 x 100mm mesh, made up into mattresses or cages for wire crate, lapped, wired and laid in position, including closing tightly after packing the crate after filling complete all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed with pressed mild steel terminal boxes duly painted with a coat of red oxide primer with suitable thickness plastic laminated sheet cover of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge. Note: a) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for fan etc with proper fixing clips all as directed

S&F switch piano flush button single pole one way 5 amps 230 volts,complete all as specified and directed .

S&F ceiling rose surface bakelite two to three terminal isolated body fixed on PVC round block complete all as specified.

S&F in replacement LED tube light fitting. ,1x16w, 230v AC decorative box type, 4 feet long, with driver, holder including 4 feet LED tube rod, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F Lamp holder PVC with polycabonate type with coard grip cap sutable for batten fittings including 12 W LED bulb, complete all as specified and as directed.

S&F in replacement sheet metal powder enclosure powder coated double door SPN 4, way having provision for one No incoming MCB SPN and out going MCBs SP AC 230 Volts, 50 HZAC supply having protection IP 43, IK-09 with copper bus bar rated 200 Amps, neutral link,earth bar complete all as specified

S&F in replacement MCBs isolator 40 Amps, 240 Volts, 10 KA breaking capacity of C series all as specified.

S&F in replacement MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards all as specified.

S&F service wire 06 sqmm 2 core aluminium cable PVC sheathed 1100 V grade with light grade GI pipe 40mm dia fixed with service brackets complete all as specified and as directed.

MANOTRA BUILDER

KHOSLA ENGINEERS BUILDERS

m/s pankaj soni

M/S NEERAJ ENTERPRISES

Amrik Construction co