REPAIRS TO DRAINS, FENCING, HARDSTANDING, CULVERTS, PATHS, SWT, SEMI UG SUMPS AND OTHER CONNECTED WORKS AT AIR FORCE STATION UDHAMPUR

Amount

Demolition of cement concrete (unreinforced) as in ground floor & paving n exc 15cm thick below or above ground level complete all as specified and directed by Engr-in-Charge.

Demolition of concrete reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D-2 100 mm thick (using 40mm graded aggregate) as in sub base layer, complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:5:10 type E-2 75 mm thick (using 40mm graded aggregate) as in sub base layer, complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C-1 50mm thick (using 20mm graded aggregate) as in plinth protection finished the concrete surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for providing precast cement concrete in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain fair faces, including chamfers weatherings throating etc. and setting in mortar complete with joints to match, type B-1 1:2:4(20mm graded aggregate) Set in CM1: 4 complete all as specified and directed by Engr-in-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified and directed by Engr-in-Charge.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness, M-50 Grade with grey cement and pigment complete all as specified and directed by Engr-in-Charge.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with topping of cement mixed with grey cement and pigment complete all as specified and directed by Engr-in-Charge.

M&L for except Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with topping of cement mixed with grey cement and pigment complete all as specified and directed by Engr-in-Charge.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engr-in-Charge.

M&L for sand cushioning 25mm thick under floor or in foundation including watering and consolidation, complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge.

M&L for Cement concrete type B-1, 1:2:4 (20 mm graded aggregate) 25mm thickness as in floor for laying tiles, complete all as specified and directed by Engr-in-Charge.

M&L for Outdoor Floor tiles of size 300x300mm thickness not less than 10mm set, jointed and pointed in neat cement slurry in floor,laid over and incl 15mm thick cement screed base in CM 1:4,complete all as specified and directed by Engr-in-Charge.

M&L for coloured Chequered cement concrete tiles of size 20cm x 20cm x 25 mm/30mmx30mmx25mm thick (with grey cement and colour pigments) set, jointed and pointed in neat cement slurry in floor, laid over and incl 15mm thick cement screed base in CM 1:4, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of concrete surfaces and applying one coat of concrete floor paints on new/old surfaces complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in lintels up to 1.50m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing up to 60cm in height, copings kneelers, apex stones and mass concrete incl necessary form work, complete all as specified and directed by Engr-in-Charge.

Dismantling fencing wire mesh, any type complete all as specified and directed by Engr-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed by Engr-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embedded in cement concrete complete all as specified and directed by Engr-in-Charge.

Excavation in post holes( or similar holes) each n exc 0.5 cum , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil, complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 Type C-2 (using 40mm graded Agg) as in foundations, filling and mass concrete, complete all as specified and directed by Engr-in-Charge.

M&L for mild steel work for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

M&L for Mild steel round bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending for tieing of chain link fencing of Gd.I, IS-432 (Part-I), complete all as specified and directed by Engr-in-Charge.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of new steel iron surfaces of any descripotion over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

S&F in repairs galvanised. 2 strand, steel Barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails , including, securing or tieing at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed by Engr-in-Charge.

Demolition of brick work, stone/boulder masonry built in cement mortar complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class B bricks straight or curved on plan exc 6m radius in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls etc. including raking out joints hacking for keys scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick mixed with water proofing compound on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished with even and smooth w/o using extra cement, complete all as specified and directed by Engr-in-Charge. (WPC will be measured and paid seperately).

M&L for rendering 10mm thick mixed with water proofing compound on fair faces of brick work or concrete surfaces in cement mortar 1:3 finished with even and smooth w/o using extra cement, complete all as specified and directed by Engr-in-Charge.. (WPC will be measured and paid seperately).

Supply only of intergral water proofing compound complete all as specified and directed by Engr-in-Charge.

M&L for Preparing of newly plastered surfaces of walls and applying two coat of cement base paint in camouflage pattern over a coat of cement base primer, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of wall and applying two coats of white wash on wall surfaces complete all as specified and directed by Engr-in-Charge.

S&F welded steel wire fabric (weight n exc 4.00 Kg per sqm metre) fixed to wood or steel members, complete all as specified and directed by Engr-in-Charge.

Dismantling Wrought Iron or Mild Steel works of any description not otherwise provided for, complete all as specified and directed by Engr-in-Charge.

S&F rolled mild steel in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410W (Gde E 250 quality A) complete all as specified and directed by Engr-in-Charge.

S&F in repairs mild steel, plain, black sheet of 1.00 mm thickness in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheets, asbestos cement (corrugated, semi corrugated) etc sheets and any type or any description of roof covering, complete all as specified and directed by Engr-in-Charge.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel 0.50mm thick of any colour having tensile strength of 550mm as in ridge/valley gutter fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.

Reinforced cement concrete 1:2:4, type B-1 ( using 20 mm graded crushed stone aggregate ) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like and mass complete all as specified and directed by Engr-in-Charge.

M&L for mild steel bars TMT 10 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

M&L for mild steel bars TMT 08 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match(over 20mm thick screed bed in CM 1:4) the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match(over 20mm thick screed bed in CM 1:4) the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.

M&L for mirror polishing on marble/granite/kota stone/stone work where ever required to give high gloss finish complete all as specified and directed by Engr-in-Charge.

S&F Providing precast cement concrete (Type B0 1:2:4, 12.5mm graded aggregate) louvres and jallies, 25mm thick (measured solid) set in cement mortar 1:4, including all mouldings but excluding frame) complete all as specified and directed by Engr-in-Charge.

S&F Plastic dividing strips 1.5mm thick,40mm wide and inserted in position, conform to design complete all as specified and directed by Engr-in-Charge.

Excavating over areas, n exc1.5 m deep for septic tanks and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in deep and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge.

M & L for hardcore with broken stone or boulders n.exc 63 mm gauge , deposited , spread in layer n.exc 15 cm thick , watering and ramming to a true surface complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B-1 (using 40mm graded stone aggregate) as in foundation/mass concrete complete all as specified and directed by Engr-in-Charge.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Removing excavated material n exc . 50 m and depositing where directed at a level n ' exc 1.50m above the starting point complete all as specified and directed by Engr-in-Charge.

Returning filling, incl spreading, levelling, watering & well ramming in layers n.exc 25 cm in Hard/dense soil, complete all as specified and directed by Engr-in-Charge.

Material and labour for RCC nominal (1:2:4) Mix Slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge.

Material and labour for RCC nominal (1:2:4) Mix for partition walls and the like complete all as specified and directed by Engr-in-Charge.

M&L for formwork to flat rough finished surfaces of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-Charge.

M&L for formwork to rough finished surfaces of concrete edges of concrete flats, culvertes, slabs, trends, breaks in floors, openngs in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed by Engr-in-Charge.

M & L for formwork to vertical sides of partion RCC in rough finished rectangular surfaces of concrete complete all as specified and directed by Engr-in-Charge.

M&L for formwork to rough finished surfaces of concrete edges of concrete flats, culverts, slabs, trends, breaks in floors, openngs in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed by Engr-in-Charge.

M & L 150mm dia bore reinforced concrete pipes, class NP2 laid and jointed complete with collars complete all as specified and directed by Engr-in-Charge.

Concrete bed to drain pipes of 150mm dia , 1:3:6 (type C-2) using 40mm grade stone aggregate as in cradles complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregated in coping, benching ,for man holes including necessary from work and fnishing of exposed surface of concrete complete all as specified and directed by Engr-in-Charge.

S&F 150 mm dia single "Y" or "T" Junction SWG drain pipes complete all as specified and directed by Engr-in-Charge.

DAVINDER SINGH (BID ID -3071574)

MAHAJAN TRADING CO (BID ID -3073368)

APARANA ENTERPRISES (BID ID -3068840)

TARUN BUILDERS (BID ID -3073012)

ANIKET TRADERS (BID ID -3071322)

ASIA BUILDER (BID ID -3073558)