PROVN OF JCOs LIVING WITH ATT BATHROOM INB 330 FD REGT UNDER GE DINJAN

Amount

M & L for boring 150 mm dia hole in all kind of soil upto maximum depth 10 meter or up to refuse (N=100) whichever meet earlier including collection of undisturbed sample from cohesive soil only conducting standard penitration test at 12 meter and 1.5 meter interval alternatively as per relevant IS code complete all as directed.

Completion of field work & lab test result and submission of report in Per Job quadruplicate suggesting depth of foundation type of fundation and safe bearing capacity with CD-1 (one) copy complete all as specified and directed.

M & L for surface dressing n. exc 15 cm deep in soft/loose soil, complete all as specified and as directed.

Excavation in trenches for soft/lose soil n.exe 1.5 in wide and n.exc 1.5 depth for fdn, etc as specified and as directed.

M&L for excavating in post holes soft/loose soil (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or brokken rubble mixed with earth around, in layers not esceeding 25 cm, and remove surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed.

PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and as directed.

M&L for Cement Concerete1:3:6 type C-2 (40mm grded aggregate) in foundations, filling as in embedding of angle, surface channel etc as specified and as directed.

M&L brick work with subclass 'B' bricks straight or curved on plan exc 6 m mean radious, built in CM (1:6) all as specified and directed.

Returning filling in, including spreading. Levelling, watering and well ramming in layers not exc. 25 cm in any type of soil complete all as specified and as directed.

Removing exavated material n exc 50 mtrs distance deposited as directed at a level n exc 1.50 mtrs height from the starting point for soil

M&L for sand filling under floors in layers n.exc 15 cm thick,spred,level and rammed including watering and consolidation as specified and as directed.

M&L for broken stone bolder as hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and as directed.

M & L brick work with sub class-B bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 all as specified and as directed.

Providing, cement concrete Type B1 1:2:4 (20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edgesin lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, coping,benching, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed.

Use and waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and as directed.

Use and waste for Formwork to sides of square, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions rough finished surfaces of conrete flat complete all as specified and as directed.

Use and waste for Formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc all as specified and as directed.

Reinforced cement concrete design mix M-25 (using 20 mm graded aggregate) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed.

Reinforced cement concrete design mix M-25 (using 20 mm graded aggregate)as in columns, pillars, piers, posts and struts all as specified and as directed.

Mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified and as directed.

S & F for TMT bars 5mm dia over and upto and including as in stirrups all as specified and as directed.

M&L for PCC 100 mm thick Type B1 1:2:4 (20mm graded stone aggregate) as in sub base flooring all as specified and directed.

M&L 15 mm thick, screed bed or bedding layer of cement mortar 1:6, for laying floor finishes all as specified and as directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed.

M&L rendering 10mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in vertical surfaces for laying tiles as directed.

M&L Glazed ceramic tiles in vertical surface 450x 300x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles all as specified and directed.

M&L Screed bed or bedding layer 15 mm thick in cement mortar 1:6 on floors for laying floor finish all as directed.

S&F Chequrred cement concrete tiles 25 cm x 25cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment all as specified and as directed.

M&L Screed bed or bedding layer 15 mm thick in cement mortar 1:6 on floors for laying floor finish all as directed.

M&L of Machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L of Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed in CM 1:4 and jointed with j grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:6) and finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering 10mm thick on fair face of brick works or concrete surfaces of walls with CM (1:4) anf finished even and smooth without using extra cement all as specified and as directed.

M&L for preparation newly plaster surfaces of wall, chajja facia etc with putty 1-2mm thick and applying two coats of 100% premium Acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS-15489=2004 alkali and fungal resistant exterior paint of required shed (company depot limited) with silicon additives 1/43 litres/10 Sqm over and including primer applied 0.90 litres/.10 sqm over new surfaces using Airless spray technology with maximum working pressure of 3300 PSI and capable of operating single spray gun with a maximum material hose length of 30 Mtr, the spray machine whould be of reputed manufacturer with pro guaeds technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and acessories complete all as specified and directed.

M&L for preparing of new plastered surfaces of walls & applying white primer including applying plaster of paris putty of 1 -2 mm thickness over plastered surface to prepare the surface even and smooth etc and applying two coats of oil bound distemper etc complete all as specified and directed.

S&F Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly as per specification & drawing., Section -8, clause 8.24(a) all as specified and as directed.

M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, all as specified and as directed.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 incljuding fabrication etc, all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sq.m. each pane, all as specified and as directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sq.m. each pane, all as specified and as directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, all as specified and as directed.

S&F powder coating Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified including powder coating of minimum 50 micron thickness, all as specified and as directed.

S&F Powder coating anodised aluminium window and ventilator shutters, side hung type without sash, aluminium sectiion weighihg 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber e packing, anodised handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and as directed.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all as specified and as directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F 12mm Prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, all as specified and as directed.

S&F 75 mm size, butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, all as specified and as directed.

M&L 100 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and as directed.

S&F 100mm size, aluminium anodised handle, fabricated type, all as specified and as directed.

S & F Aluminium alloy anodised sliding door bolt with hasp & staple ( bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 250 mm, all as specified and as directed.

S&F Mild steel sliding door bolts,250mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and inc, all as specified and as directed.luding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed as specified and directed.

S & F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F curtain rails, mild steel, aluminium alloy chromium plated with fixing brackets, stops, rollers etc all as specified and as directed.

S&F floor door stopper 150mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in doors all as specified and as directed.

M & L PCC 1:3:6 type C-2 (50 mm) thick ( 40mm graded aggregate) thick as in plinth protection/Hard standing, etc finishing cement concrete surface even & fair whthout using extra cement making joints with bitumastic filling in proportion of bitumen and sand 1:2 complete all as specified and directed.

S&F 605x605mm Anodised aluminium snap grid frame work for false ceiliong all as specified and as directed.

S&F Hangers 6mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilinhg cleats made out of G.I. flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified.

M&L for 6mm thick high pressutre, oceanic pre-primed, self embossed, non-asbestos fibre cement decorative board , water, termite and fire resistant for insulatrion and acoustic piurpose fixed or laiod/inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240including distance pieces, cleats etc. all as specified and as directed.

S & F for rolled mild steel work in roof trusses (framed ), trussed, purlins crane gantries , rafts and fastening and heavy brackets framming (beams tee,angle channel and or flat sections) including distance pieces, cleat nut bolts etc quality confirming to Fe-290 (Gde E-165) as specified and as directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and as directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end screwed the other, or screwed both to be fitted with washers and one hexagonal or square nut, not exc 5 cm long coomplete all as specified and directed.

S & F Pre- painted galvatume aluminum zinc coating GI profile sheet of teraquoata tile design looks based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI profile sheet of teraquoata tile design looksbased plain steel sheet 0.50mm thick if an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, gutteer and eves board fixed with self tapping screws all as specified and as directed.

S&F steel tubes, galvanised 15 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete as specified and directed including taking down old one all as specified and as directed.

S&F steel tubes, galvanised 20 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete as specified and directed.

S&F 500 Ltrs rotational moulded polythelene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position all as specified and as directed.

S&F 20 mm bore, Gun metal gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Ball brass valves 20mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and as directed.

S&F vitreous china wash down water closet pan (Pedestal pattern) with seat cover white with 'P' or 'S' trap, including and flushing pipe etc complete including making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing specifications as specified (excluding fixing bolts, flushing cistern and flush pipe) all as specified and as directed.

S&F Vitreous china wash basin, white flat back, size 550mm x 400mm with brackets, excluding pillars cock 15mm bore CP, PVC connection of 450mm long including PVC (HDPE) 32mm bore waste pipe, brass couplings 32mm CP etc complete all as specified and directed.

S&F 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and as directed.

S&F stop valves, 15mm bore cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed bhoth ends for iron pipe or for unions as specified and directed.

S&F 15mm bore PVC connection pipe 450mm longh with PTMT nuts at both ends and cup and washers as specified and directed.

S&F 10 Litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet. Ball valve, float bracket & flush pipe complete all as specified & directed.

S&F 15mm bore Bib Taps, Chromium plated cast copper alloy with crutch or butterfly handle, screwex for iron pipe or for brass ferrule and fixed as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

S&F 110mm PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls complete as specified and directed.

S&F PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in ground or floors 75mm dia complete as specified and directed.

S&F 110mm bore PVC (SWR) bends of any radius complete as specified and directed.

S&F PVC (SWR) junction, single T equal or unequal 110mm bore, as specified and directed.

S&F in repairs, PVC (SWR) 75 mm dia, floor trap, plain with grating including jointing to waste pipe with solvent cement and fixing in PCC 1:2:4, as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl as specified and directed.

S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern omplete all as specified and as directed.

S&F 32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm?45gms/40mm-60 gms) complete all as specified and directed.

M&L for continuous brick edging; with width equal to the width of the brick; laid dry on end vertically complete all as specified and directed.

Cement Concrete bed 1:4:8 type D2 to drain pipes 300mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; in as specified and directed.

Reinforced concrete pipes, class NP2, laid and jointed complete with collars 300mm bore as specified and directed.

M&L Extra for forming fair finishing to drains or channel of 30 cm inner girth in cement concrete with using extra cement including forms, moulds, mitred/stopped ends etc as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil as specified and directed.

M&L for 15 mm thick rendering in cm 1:4 on brick work or concrete surface and finished even and smooth without using extra cement as specified and directed.

Supply only integral water proofing compound all as specified and directed.

M&L for Providing Precast cement concrete of PCC Type B1 1:2:4 (using 20mm graded agregate) as in cover slab complete all as specified and directed.

M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for Concrete bed 1:4:8 , Type D2 (using 40 mm graded agg) to 150 mm drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex-tra cement, including forms, moulds, mi-tred/stopped ends etc as specified and directed.

Cutting into existing manholes for connecting new drain , making good to pipe rendering ,cutting out existing bencing for and forming branch channel (1/2 round are 3/4 section)in cement concrete (1:2:4)type B1 smooth finished and reforming bencing as required for 150mm dia complete all as specified to directed.

M&L point wiring with 1.5 Sqmm (nominal area), PVC insulated FRLSH, multistranded, single core, sheathed, copper conductor cables drawn through concealed PVC conduit not less than 20mm dia with all fittings and accessories (like Tee, bend etc.) complete for Phase, neutral and earth wire connecting to common earth point including suitable for modular sunken box as required at site complete all as specified and directed as below, modular sunken box concealed in walls for housing modular switches, sockets, regulators, etc all as specified and as directed. Note : (a) PVC Conduits/Casing-caping, two run cables and one run of earth wire will be measured as one length. (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.) (c) Price for Cutting chases for conduits and sinking's for boxes and making good to walls matching with existing surface for concealed conduit wiring should be included in the quoted rate.

Description all as per Seritem No. 101 here-in-before but one 5 Amps, 3/5 pin socket outlet on the same board with other switches complete all as specified and directed.

Description all as per Seritem No. 101 here-in-before but for one 3/5 pin Switch socket combination, 5 Amps on Independent board complete all as specified and directed.

Description all as per Seritem No. 101 here-in-before but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 15 Amps switch socket combination on Independent board complete all as specified and directed.

M & L for Sub main wiring with two runs of 4 sqmm single core cable FRLSH PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through concealed PVC conduit not less than 20mm dia with all fittings and accessories (like Tee, bend etc.)etc including 4 sqmm (nominal area) single core, FRLSH PVC insulated, multistranded, unsheathed, copper conductor as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Conduits/Casing-caping, two run cables and one run of earth wire will be measured as one length. (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.) (c) Price for Cutting chases for conduits and sinking's for boxes and making good to walls matching with existing surface for concealed conduit wiring should be included in the quoted rate.

Supply and fixing lamp holder angular PVC/Polycarbonate suitable for batten fittings complete all as specified/directed.

Supply and fixing of ceiling rose 3 ph PVC/Polycarbonate complete all as specified/directed.

Supply and fixing of Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified/directed.

Supply and fixing of modular switch one way 6 amps 1 module 240 Volts complete all as specifed/directed.

Supply and fixing of Modular Bell push 6A 1 module 240 Volts complete all as specifed/directed.

Supply and fixing of modular socket outlet 2/3 pin 6 Amps 240 volts 2 module complete all as specified/ directed.

Supply & fixing of modular switch one way 16 Amps 1 module 240 Volts complete all as specified / directed.

Supply and fixing of modular socket 6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed.

Supply & Fixing of modular type ceiling fan regulator electronic step type ,2 module, 120 W complete all as specified and directed.

Supply and fixing of modular white cover plate with frame 2 module complete all as specified and as directed.

Supply and fixing of modular white cover plate with frame 3 module complete all as specified and as directed.

Supply and fixing of modular white cover plate with frame 4 module complete all as specified and as directed.

Supply and fixing of modular white cover plate with frame 6 module complete all as specified and as directed.

Supply and fixing of modular white cover plate with frame 8 module complete all as specified and as directed.

S&F LED batten (1.2M) inverter type made of polycarbonate housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 115 lumen per watt and total power consumption not more than 18/20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed.

S&F LED batten inverter type made of polycarbonate housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 1000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 9/10 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed.

S&F 10W,LED, Energy saving new generation bulk head with IP66 protection and IK09 impact resistance suitable for surface and wall mounting applications. luminaire with opal diffuser having lumen output of 1100 lumens at a minimum system efficiency of 110 lumen per watt and total power consumption not more than 10 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K including lamp including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete as specified and directed.

S & F LED wall bracket light aesthetically designed with B22d & E27 lamp holder made up of Polycarbonate suitable for 9/10 W including suitable inverter LED Bulb 12W(min) complete with all accessories internally pre-wired and including connecting up with twin core twisted flexiblecopper conductor cable with suitable size complete as specified and directed.

S & F Factory made board distribution (DB) Double Door in sheet steel enclosure with common bus bar at incomming end, vertical TPN, 4 way, 420Volts , IK 09-for double door DBs, 200 amps suitable for housing incoming MCCBs complete all as specified and directed.

S & F Factory made board distribution (DB) Double Door in sheet steel enclosure with common bus bar at incomming end, SPN, 8 way, 240 Volts , 200 amps With provision for 3 pole and 4 Pole MCCB* as incomer and SP/TP MCBs as outgoings all as specified and directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of four pole and 63A current carrying capacity in the DB complete with connection testing and commissioning.

S & F MCB, SPN, 240 Volts, 6 to 32 Amps, 'C' Series, 10KA capacity complete all as specified and directed.

S & F MCB, 'C' Series, SP, 240 Volts, 5 to 32 Amps, 'C' Series, 10KA capacity complete all as specified and directed.

M & L Earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steel bars @15cm centre to centre in both direction and 10mm dia MS handle of suitable size, charcoal or coke and salt in alternative layers,necessary earth work in soft/loose soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing complete inclduing taking down old one/ dismantling complete all as specified and as directed.

Supply and fixing 9W LED Retrofit lamps Code: 9W NEO LED LAMP B22 6500K of make Surya or equivalent in Wipro/C&S/GE/Philips/Havells complete including taking down old unsv fittings.

Supply and fix BLDC ceiling fan regulator enabled, complete with three blade, down rod, accessories 230V, 1200mm sweep, Elegent white,Air delivery 220 CMM complete all as specified and directed.

S & F exhaust fan with louvres, AC, 50 Hz, single phase, 230 V, 300 mm sweep, 1400 RPM, heavy duty, metal body anti dust MS powder coated, 4 Nos blades, Insulation Class A including capacitor to ensure power factor more than 0.9 complete all as specified and as directed.

M& L for cutting of circular hole at any type of wall for fixing of exhaust fan of 300 mm sweep, grouting 4 no 100 long 12mm dia stud bolt including making good to disturb surface of wall and painting as per existing colour complete all as specified and as directed.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

M&L for Cutting the existing 100mm dia DI pipe line and inserting Tee 100x100x50 mm dia with collars as required and specified

M&L for construction of brick masonary valve pit of size upto 100 cm x 100cm x 100cm (internal dimension) one brick thick valve in CM 1:4 on 100 mm thick PCC 1:4:8 type D-2 (40 mm graded stone aggregate) as in foundation, 15mm thick rendering in cement motor (1:4) internally, externally up to 15cm below GL, providing valve pit cover made out of 3mm tick MS sheet duly welded with provision of hings, handle and locking arrangement including 40 x 40 x 5mm angle iron frame fixed on top of valve pit by means of hold fast 150mm long embedded in PCC block 1:2:4 type B-1 (20cm graded aggregate) of size 230x 200x 100mm, applyig two coats of anti-corresive paint over a coat of rate oxide, zinc chrome primer after preparation of steel & iron surfaces including necessary excavation & earth work in soft/loose soil complete as specifed and directed all as per relevent TD drawing Note :- (Drawing not attached with tender document However the same can be seen in GE/AGE E/M office during working hours)

Supply and fix 32mm dia PP-R Gate valves (brass insert) all as specified and as directed.

Supply and fix 50mm dia PP-R Gate valves (brass insert) all as specified and as directed.

Supply and Laying 50 mm outer dia, 3-Layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches/ fixed to wall/ floor etc as specified and directed.

Supply and Laying 32 mm outer dia, 3-Layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches/ fixed to wall/ floor etc as specified and directed.

PATKAI ENTERPRISE (BID ID -3438064)

M/S A K ENTERPRISE (BID ID -3438229)

M/S CHANDAN ENTERPRISE (BID ID -3437911)

boruah construction (BID ID -3437836)

FREEZCON (BID ID -3438018)