PROVN OF CHAIN LINK FENCING (APPROX 3500 METRE) WITH 04 NOS MS GATE AT PEDONG MIL STATION UNDER GE 867 EWS (4th call)

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep and getting out in soft/loose soil complete, all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and as directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering, and removing surplus soil to a distance not exc 50mtr and making good surface in soft/loose soil complete all as specified and as directed.

Removing of excavated materials (soil) to a distance n.exc 50 m and dipositing where directed at a level n.exc 1.5 m above from the starting point complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in foundations, fillings and mass concrete complete all as specified and as directed.

M & L for PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Reinforced Cement Concrete (nominal Mix) 1:2:4 type B1 (20 mm graded aggregate) as in foundations, including rafts,footings, foundation beams, bases for columns, etc.fcomplete,complete all as specified and as directed.

M & L for Reinforced cement concrete (Nominal Mix) 1:2:4 Type B 1 (20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

Use and waste of timber formwork to sides of concrete foundations, footings, bases of columns for flat rough finished surfaces of concrete complete all as specified and as directed.

Use and waste of timber formwork to sides of square, rectangular or polygonal pillars, posts struts, piers, columns, for rough finished surfaces of concrete complete all as specified and as directed.

M & L mild steel sliding door bolt 300mm long, plate type, stove enamelled black,with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts , four on bolt plate and two on staple and fixed to gate complete all as specified and directed.

S&F MS steel work with angle iron , flat section as in posts and struts in fencing ,fillets, plates etc including cutting tops to shape as directed drilling holes, notching for wire etc; including all necessary drilling, bolting or riveting etc; complete conforming to Fe 290-0 Gde -E-165 complete all as specified and as directed.

S & F of mild steel screw bolts (Machine made) with hexagonal or square heads at one end and scred the others or screw ends each screwed end to be fitted with washers and one hexagonal or square nuts 11 to 15 mm dia of neck, not exceeding 5 cm long complete all as specified and as directed.

M & L for MS round bar, 10mm dia, conforming to Fe 290-0 Gde E-165 as in line wire to chain link fencing complete all as specified and as directed.

M & L mild steel TMT bar, 10 mm dia and over as in reinforcement cut to length, bent to shape required, including crankin bending spirally for hooping, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to FE- 500-D complete all as specified and as directed.

M & L mild steel TMT bar, 5 to 10 mm dia as in reinforcement for stirrups and binder cut to length, bent to shape required, including crankin bending spirally for hooping, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to FE- 500-D complete all as specified and as directed.

M & L for mild steel framed work such as grills, gates, etc with ends of bars shouldered and/or riverted or forged into spikes: framed guard bars with Fe 290 Gde E 165 complete, all as specified and directed.

Fixing only chian link fencing including line wires, any mesh, size and type to any type of standareds, rails, straining bolts etc, including provision of binding wire complete all as specified and as directed.

S&F galvanised 2 stand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standards rails straining bolts,including securing or typing at crossing with and provision of galvanished mild steel wire, stapled or steel pins, etc (each line of wire to be measured) complete all as specified and as directed.

Supply only chain link fencing MS galvanised fencing 75 x 75 mm mesh and not less than 4mm dia complete all as specified and as directed.(Note:- Unit weight of chain link fancing shall be ascertained by BOO before measurement taken into MB for payment.BOO shall be convenedby GE 867 EWS .)

M & L Glazed ceramic colour tiles in vertical surface of pillars, size 450x350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tile over and including 10 mm thick screed bed or bedding layer in CM 1:4 finished even and rough complete all as specified and directed.

M & L for preparing new steel surfaces of any description exc 10cm width or girth and applying two coats of black japan paint complete all as specified and as directed.

M & L for preparing new steel surfaces of any descripation exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M & L for preparing new steel surfaces of any descripation not exceeding 10cm width or girth and applying, two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Note 1:- (Applicable for all parts/items) : The biidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected.

SANJAY SAW MILL