PERIODICAL SERVICES TO CERTAIN BLDGS AND REPAIR/REPLACEMENT

Amount

Taking down shutters of any description exc. 1.00 Sq.m and n.exc. 2.00 Sq.m each and removal from site.

Taking down Chowkats with shutters (Without taking off shutters from frame) area exc 1.5 Sqm but not exc 4.00 Sqm and removal from site.

Taking down Chowkats with shutters (Without taking off shutters from frame) n exc 1.5sqm each complete and removal from site.

S&F of 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2, raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, with paticle board core supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F 35mm thick 2nd class hard wood plain factory made framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply The size of rail and stile as per IS 1003 (Part-I Kiln seasoned and chemically pressure treated complete all as specified.

S & F, 35mm thick, 2nd class hardwood glazed & skelton shutters, open rebated & prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a).

S&F 35 mm thick flush shutters (Factory made), solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer.complete all as specified and as directed.

S&F 100mm long MS Medium weight Butt hinges cold rolled , fixed complete all as specified and as directed.

S&F 100mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and as directed..

S & F 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete all as specified and as directed.

S & F 150mm long floor door stopper of aluminium alloy boly and tongue anodised with hard steel spring fixed in floor complete all as specified and as directed.

S & F Brass Mortice lock 4 leavers vertical type size 100mm complete all as specified and as directed..

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed in panels of joineries with stainless steel wire staples complete all as specified and as directed.

Taking down steel/aluminium /windows, /doors, of any size with/without frame and shutters and including with all connected accessories complete.

S & F Powder coated Aluminium anodized frame work for door / windows / ventilators with one or more rebates including joining heat for fixing etc complete all as specified

S & F Powder coated anodized door shutters, aluminium section weighing not less than 0.55 Kg/M including necessary joinging cleats, galzing clips, ruber neoprene pakcing handles 2 Nos in each door, hinges anodised aliminium snap beading screws etc, complete all as specified

S&F Aluminium door closure extruded section body hydraulically regulated disignatin No 3 universal type suitablefor door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed.

S & F prelaminated particle board 9mm thick interior grade pre laminated one side with decorative choice lamination and other side balancing white lamination fixed with screws.

S&F Factory made steel window, box type, using ERW hollow 'P' section, comprising double frame for and including gauged and glazed skeleton shutter, jointed internally with flat iron 40x4mm complete including grill/ guard bars of 8mm square bars fixed horizontally @100mm C/C including mild steel hinges, handles, tower bolts, stops, lugs etc, complete all as specified & as directed by Engineer-In-Charge. (Note ; 4mm thick sheet glass and stainless steel wire mesh will be measured and paid separately)

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L in repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination fixed with timber frame work of cupborads book cases etc completle all as specified and as directed.

S&F 75mm long MS Medium weight Butt hinges cold rolled , fixed complete all as specified and as directed.

S & F 30mm width flaps of Continuous (piano) hinges,mild steel, bright finish or electro galvanised in repairs all as specified and as directed.

S & F 100 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed

Petty repairs to joinery works such as easing of doors, windows, kitchen cabinets , refixing builder hardware gauge etc incl petty repair items / materials like screws, nails , washers, grease etc and all kind of machine works i.e welding, cutting, bending, dilling , grinding, polishing etc of various location under akash vihar to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engneer In Charge. Note : (i) Replacement of builders hardware if required shall be measured and paid separately. (ii) Contractor or his authorised representative will collect such type of complaints from AKASH VIHAR complaint cell of AGE B/R - I at 9.00 AM on daily basis except sunday /Holiday. No extra payment shall be made on account of collection of complaint. (iii) Complaint must be attended within 24 hours of receipt of complaint else recovery of Rs. 100/-per complaint/ per day will be Charged.

Supply only door closure extruded section body hydraulically regulated disignatin No 3 universal type suitablefor door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed in panels of joineries with stainless steel wire staples fixed in repair complete all as specified and as directed.

M &L Welding in repairs to the thickness exc 6mm but n. exc 9mm steel section, welded length n. exc 2.5 cm in each length etc all as directed by Engineer-in- charge.

Hacking out old broken glass ( any thickness, size, quality or description) from metal frame frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones including supply and fix 4mm thick sheet glass ordinary quality in square or n. exc 0.5 sqm each pane up to 6th floor complete all as specified and directed by Engr-in-charge.

Supply only 150 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed

Supply only 200 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed

Supply only 300mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alluminium alloy complete all as specified and directed.

Supply only mild steel butt hinges of 75 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed

Supply only mild steel butt hinges of 100 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed

Supply only 150 mm extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed

Supply only 100 mm long safety type aluminium anodised hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply only floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed.

Supply only mild steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and directed.

Supply only Brass Mortice lock 4 leavers vertical type size 100mm complete all as specified and as directed..

S&F in repairs of powder coated curtain rod brackets suitable for fixing 1" dia size curtain rail, fitted over wooden round gatta, complete etc, all as specified and as directed.

S&F in repairs 20 mm dia anodised aluminium anodised powder coated tubular curtains rod including fixing brackets complete all as specified and directed.

Taking down cement plaster on brick or stone masonry wall etc incl uding racking out joints haking for key, scrubbing down with water etc as in internal and external surfaces of man holes, septic tank, filter bed etc incl removing of debries complete all as specified and directed.

M/L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete and finishing the surfaces even and smooth without using extra cement in patch work at various places upto 8th storey incl necessary formwork complete all as specified & directed.

M&L Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces including finishing even and fair. complete all as specified and directed.

M&L Rendering 10mm thick in cement mortar 1:3 as in ceiling concrete surfaces including finishing even and fair. complete all as specified and directed.

M & L for applying three coats of white wash on wall including preparation of newly plastered surfaces complete all as specified and as directed.

M & L for applying two coats of oil bound distemper on walls over a coat of primer including preparing newly plastered wall surfaces complete all as specified and as directed.

M & L for applying three coats of white wash on ceiling including preparation of new plastered surfaces complete all as specified and as directed.

Material and Labour for preparation of Old decorated surfaces of Walls including brooming down or steel wire brushing, scrapping down smokes soot, module, moss and efflorescence salt, oil and greasy spots etc and applying One coat of white wash Complete all as specified and directed.

Material and Labour for preparation of Old decorated surfaces of Ceilings including brooming down or steel wire brushing, scrapping down smokes soot, module, moss and efflorescence salt, oil and greasy spots etc and applying One coat of white wash Complete all as specified and directed.

Material and Labour for preparation of Old decorated surfaces of Walls including washing, rubbing down & stopping of distempered surfaces and applying One coat of oil bound distemper Complete all as specified and directed.

Material and Labour for preparation of Old decorated surfaces of ceilings including brooming down or steel wire brushing, scrapping down smoke, soot, module, moss and efflorescence salt, oil and greasy spots etc and applying One coat of Oil bound distemper Complete all as specified and as directed.

Material and Labour for preparation of Old decorated surfaces of Walls including brooming down or steel wire brushing, scrapping down smoke, soot, module, moss and efflorescence salt, oil and greasy spots etc and applying One coat of cement base paint up to 6th floor Complete all as specified and directed.

Material and labour for preparation of Old wood or wooden based surfaces or previously untreated surfaces, not otherwise described, over 10cm width or girth and applying One coat of Synthetic enamel paint Complete all as specified and directed.

Material and Labour for preperation of Old painted steel surfaces of any description over 10 cm width or girth and applying One coat of Synthetic enamel paint Complete all as specified and directed.

Material and Labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint any tint over a coat of alkaline resistant primer, Complete all as specified and directed by Engr-in-Charge.

supply and fix 4mm thick sheet glass ordinary quality in square or n.exc 0.5 Sqm each pane, including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, upto 4th floor height complete all as specified and directed by Engr-in-Charge.

supply and fix 4mm thick sheet glass ordinary quality in square or n.exc 0.5 Sqm each pane, including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, above 4th floor height, complete all as specified and directed by Engr-in-Charge.

supply and fix 4mm thick sheet glass ordinary quality in square or exc 0.5 Sqm each pane, including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, upto 4th floor height, complete all as specified and directed by Engr-in-Charge.

Cutting/ uprooting plantation found on external walls/ soffits of building of height upto G+3rd floors including removing roots, chemically treated to avoid further growth of plantation repairing the area n.exc 1sqm by plastering in CM 1:4 etc complete all as specified and directed.

Cutting/ uprooting plantation found on external walls/ soffits of building of height from G+3rd to G+7th floors including removing roots, chemically treated to avoid further growth of plantation repairing the area n.exc 1sqm by plastering in CM 1:4 etc complete all as specified and directed.

Sri Vijalakshmi Constructions (BID ID -3095569)

VARALAKSHMI CONSTRUCTIONS (BID ID -3076512)

sri sai construction (BID ID -3090577)