01-EE-2026-27LOT05

Granular Sub-base with Well Graded Material (Table 400.1)(A) By Mix in Place Construction of granular sub-base providing well graded material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place mathod with rotavator at OMC and compacting with smooth wheel roller to achive the desired density complete as per technical specification clause 401

WBM Grading 2--Providing, laying spreading and compaction stone aggregates of 45-63 mm specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming stone sceeing/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading as per technical specification clause 405

WBM Grading 3 Providing, laying, spreading compacting stone aggregate of specific size (22.4mm to 53mm) (W.B.M.-G-III) in base coat towater bound macadam specification including spreading in uniform thickness (compacted 75mm, loose 100mm) hand packing, rolling with three wheel 80-100 KN static roller in stages to proper grade and camber, applying and brooming stone screening/ binding materials to fill up the interstices of course aggregate watering and compacting to required density including cost of all material, labour, T&P etc.

Providing & applying primer coat with Bitumen Emulsion(SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means.

Providing & applying Tack coat with Bitumen VG-10 using bitumen presser distributor at the rate of 0.35 kg/sqm on the prepared bituminous/granuiar surface cleaned with mechanical broom.

Providing,laying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen emulsion to required line,gradeand level to serve as wearing course on a previously prepared base, including mixing in a uitable plant laying and rolling with athree wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of eitherType A as per Technical specification clause 508

Providing and laying seal coat sealing the voids in a Bituminous surface laid to the specified levels grade and cross fall using Type C, as per Technical specification clause 510 .

Brick edging on both side of road with first class Bricks 8cm wide ,12cm deep laid with mud mortar including cost of all material, labour ,T& P etc.

Earth Work in filling on S/R daula & patari work for all type of soil with 1.5 mt. lift & lead upto 1.0 km by Truck or Tractor Trolly with spreading, grading to required slope & compaction including all labour T&P etc. required .