105 H(F)(W)/2025-26

Part - A ( Material) Following Material Supplied by the Contractor:-

LT Clamp for ST Pole/PCC Pole

LT Shackle Insulator

Distribution Box Clamp

11 KV Pin Insulator with Pin

11 KV Disc Insulator with fitting

Top Channel Clamp

Dropper Channel

Dropper Channel Clamp

Tee- off Channel

11 KV V type Cross Arm holding Clamp

11 KV F Clamp for ST Pole

Danger Board with Clamp

Nut & Bolt

The woek of safe carriage of the following material with loading/unloading from store centre Darshan Nagar to site of work. (Approx. Distance 0 to 40 Km.)

S.T. Pole 11 Mtr. Long

PCC Pole 8.5 Mtr. Long

AB Cable (1x16+1x25) sqmm

AB Cable (3x95+1x70+1x16) sqmm

Distribution Box Single Phase

Distribution Box Three Phase

ACSR Weasel Conductor

ACSR Dog Conductor

Transformer 25 KVA

Transformer 63 KVA

Transformer 100 KVA

Transformer 250 KVA

11 KV XLPE Cable 3x70

11 KV Cable Jointing kit outdoor 3x70 sqmm

11 KV Staight Through Cable Jointing Kit 3x70 sqmm

11 KV Pilfer Proof Metring Cubical

Other Line material i.e. cross arm/conductor/pin/ insulator/stay/earthing/cable Box etc. A.B. Cable

Dragging of PCC/ST pole as per RESPO Norms.

Fabrication and Erection of Single Pole Support on PCC/ST Pole including grouting with 1:4:8 ratio Cement, Sand & Brick Ballast & including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. ( Cost of clamps borne by contractor)

Fabrication and Erection of Double Pole Support on PCC/ST Pole including grouting with 1:4:8 ratio Cement, Sand & Brick Ballast & including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. ( Cost of clamps borne by contractor)

Stringing, Sagging, Binding and jumpering of ACSR Weasel Conductor as per RESSPO Norms.

Stringing, Sagging, Binding and jumpering of ACSR Dog Conductor as per RESSPO Norms.

Stringing, Sagging, Binding and jumpering of AB Cable Single Phase Size (1x16+1x25) as per RESSPO Norms.

Stringing, Sagging, Binding and jumpering of AB Cable Single Phase Size (3x95+1x70+1x16) as per RESSPO Norms.

Erection & Commissioning of Single/Three Phase Distribution Box with help of clamps (Cost of clamp & Bolt & Nut shall be borne by contactor) as per Norms.

Grouting and Binding of Stay in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms.

Earthing of Poles as per RESPO Norms.

Laying of underground 11 KV 3x70 sq mm XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 500 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Hanaging, Hosting & clamping of G.I. Pipe, channel, nut & Bolt 3x7 mm2 XLPE 11 KV cable as per RESSPO Norms (cost of all accessories will be borne by contracotr)

Installation of Heat Shrinkable Type cable jointing kits outdoor end Termination suitable for 11 KV XLPE cable 3x70 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 11 KV XLPE cable 3x70 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Mounting of 25 KVA Transformer as per RESSPO Norms.

Mounting of 63 KVA Transformer as per RESSPO Norms.

Mounting of 100 KVA Transformer as per RESSPO Norms.

Mounting of 250 KVA Transformer as per RESSPO Norms.

Installation of 11 KV Pilfer Proof Metering Cubical

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Construction of Plinth of 250 KVA Transformer including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Fencing of Transformer Plinth 250 KVAwith the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc.

Supply and Installation of G.I. Pipe 6" dia.

Please Enable Macros to View BoQ information