REPAIR MAINTENANCE OF CIVIL WORKS INCLUDING PERIODICAL SERVICES TO CERTAIN E M INSTALLATIONS AT AFA HYDERABAD

Amount

Taking down chowkats or frames with shutters not exc 1.5 Sqm each (without taking off shutters from the frame) complete all as directed.

Taking down chowkats or frames with shutters exc 1.5 sqm but not exc 4.0 sqm each (without taking off shutters from the frame) complete all as directed.

Dismantling structural steel work including doors, gates, MS Flats used as in wind ties etc but excluding framed truss etc complete all as directed.

S & F pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including PCC 1:3:6 Type C1 (using 20mm graded stone aggregate) for backfilling in steel frame complete all as specified and as directed.

S&F 35 mm thick 2nd class hard wood Plain framed, panelled shutters (two panel) with lock rail and panel of 9 mm thick B.W.P commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed

S & F solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with M S square tube complete all as specified and as directed.

S & F factory made solid PVC door shutter of 30 mm thick (style) consisting of frame made out of M S tubes for top and bottom rails. M S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and as directed.

S & F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F of Aluminium handles, cast type, anodised of size 150 mm long etc complete all as specified and as directed.

S&F of Aluminium anodised, barrel tower bolts of extruded section of size 150 mm long etc complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) of size 300 mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed.

S&F steel windows with side hung double shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

M & L for framed work such as grills, gratings etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and as directed

M & L for preparing old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of aluminium paint by spray gun complete all as specified and as directed

M & L for preparing old plastered or unplastered surfaces on ceilings including cornices and applying one coat of white wash complete all as specified and as directed

M & L for preparing old plastered or unplastered surfaces of walls / ceilings including cornices by washing, rubbing down and stopping and applying one coat of distemper oil emulsion complete all as specified and as directed

M & L for preparing old plastered or unplastered surfaces on walls / ceiling including cornices and applying one coat of cement based paint complete all as specified and as directed

M & L for preparing old plastered or unplastered surfaces on walls including cornices and applying one coat of sandtex matt (weather proof paint) complete all as specified and as directed

Taking down cement plaster from walls built in cement mortar, etc. including raking out joints, hacking for key, scrubbing down with water, etc. to receive plaster complete all as specified and as directed

M&L for rendering 15 mm thick on surfaces of brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and rendering is to be finished even and smooth without using extra cement complete all as specified and as directed

M&L for rendering 5 mm thick in ceilings in CM (1:3) and rendering is to be finished even and smooth without using extra cement complete all as specified and as directed .

M & L for preparing new plastered or unplastered surfaces on walls including cornices and applying two coats of cement base paint complete all as specified and as directed .

M & L for preparing new plastered or unplastered surfaces on walls including cornices and applying three coats of white wash complete all as specified and as directed .

M & L for preparing new plastered or unplastered surfaces on ceilings including cornices and applying three coat of white wash complete all as specified and as directed .

Hacking out old broken glass panes of any description, from old wooden or metal frames, or stone, concrete or brick surrounds any thickness or size complete all as specified and as directed.

S & F 4 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in wooden frames in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 4 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in wooden frames in squares exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Taking up or down 15 mm bore PVC / steel tubing and connections, complete all as directed.

Taking up or down 20 mm bore PVC / steel tubing and connections, complete all as directed.

Taking up or down 25 mm bore of pipe PVC / steel tubing and connections,complete all as directed.

S&F 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F of 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F of 25 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified and as directed.

M&L for screed bed or bedding layer of cement mortar 15 mm thick for laying floor finishes in CM (1:6) etc complete all as specified and as directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for rendering / screeding 10 mm thick in cement mortar 1 : 4 on fair faces of brick or concrete surfaces rough finished to receive as backing of wall tiling etc complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles of size 300 x 450 x7 mm thick, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for screed bed or bedding layer of cement mortar 20 mm thick for laying floor finishes in CM (1:6) complete all as specified and as directed.

M & L for laying cement chequered self glossy tile of size 300 X 300 X20-25 mm thick jointed and pointed with cement to matching colour etc , with grey cement no pigments etc complete all as specified and as directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L for PCC 1:4:8, type D-2 mix using 40 mm graded stone aggregate as in foundations, filling and mass concrete etc complete all as specified and as directed.

M&L for laying PCC (1:2:4) type B-2 mix using 40 mm graded stone aggregate as in floors of 75 mm average thick for paving's, hard standing and plinth protection etc finished fair and even complete all as specified and as directed.

M&L for laying PCC (1:2:4) (type B-1 mix (using 20 mm graded stone aggregate ) as in floors of 40 mm average thick finished fair and even complete all as specified and as directed.

S&F in repairs Vitreous china wash basin, white flat back, size 550 x 400 mm including brackets etc complete all as specified and as directed.

S&F in repairs Pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15 mm bore complete all as specified and as directed.

S&F in repairs Vitreous china squatting pan, Orissa pattern WC of size 580 mm x 440 mm,white with integral foot rest including connection to trap and to flushing pipe, anti-syphonage pipe, and with P or S trap, including making good to floor complete all as specified and as directed.

S&F in repair PVC valve less, symphonic action type, flushing cistern, low level, 10 ltr capacity, white, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F in repair of Vitreous China urinals, half stall type, white (excluding cistern and flush pipe) including waste coupling with waste pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement and fixing 15mm dia CP urinal spreader with GI pipe complete all as specified and as directed.

S&F in repairs of PVC connection 15 mm size with brass CP nuts of length 450 mm complete all as specified and as directed.

S&F in repairs of Waste coupling of 32 mm chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete all as specified and as directed.

S&F in repairs of CP Bib taps 15 mm dia cast copper alloy fancy type with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.

S&F in repair concealed angle cock of 15 mm dia chromium plated with long shank and cup etc complete all as specified and as directed.

S&F in repairs Gun metal gate / globe valves of 25 mm dia with iron wheel head screwed both ends for iron pipe etc complete all as specified and as directed.

S&F in repairs Ball valve 25 mm dia high pressure PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs Rotational moulded PVC water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) , three layered, hoisted and fixed in position as specified in SSR part – I complete all as specified and as directed.

S&F in repair 110 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls for rain water pipe and wc outlet pipe complete all as specified and as directed.

S&F in repair 75 mm dia PVC(SWR) pipes double socketed, in any length with rubber ring joints, fixed on walls for rain water pipe and wc outlet pipe complete all as specified and as directed.

S&F in repair 110 mm dia PVC (SWR) plain bend complete all as specified and as directed.

S&F in repair 75 mm PVC (SWR) plain bend.complete all as specified and as directed.

S&F in repair 75mm dia PVC (SWR) plain bend with provision of access door etc complete all as specified and as directed.

S&F in repair 110 mm PVC (SWR) Vent cowl complete all as specified and as directed..

S&F in repair 75mm PVC (SWR) Vent cowl complete all as specified and as directed.

S&F clamps, supports or stays for rainwater pipe , ventilating pipes including bolts if required and pintle hinges; hand made sliding bolts; clamps; hold fasts; wall ties; plain angle cleats for securing and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed..

S & F in repair 1.25 mm thick of laths steel rolling shutters, of any size including all fittings as specified including top cover, anchoring rod, hasp and staple, ball bearing, safety lever centre/side locks in position as indicated, complete push pull or manual type complete all as specified and as directed.

Taking down existing rolling shutter of any size or any description and refixing in same after necessary oiling, greasing, and replacement of unserviceable safety levers, ball bearing for smooth functioning complete all as specified and as directed.

M & L for cement concrete type C-2 mix PCC 1:3:6 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 290 Gde E-165 complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for over 10cm in width or girth, not otherwise described

M&L for Precast reinforced cement concrete type B-1 mix , 1:2:4 using 20 mm graded stone aggregate as in cover slabs (for manholes) set in cement mortar 1:6 complete all as specified and as directed

M & L for Mild steel TMT bars 6 mm to 8 mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M & L for removing exisiting old painted steel iron, concrete, brick, stone surfaces etc of any width or girth by paint or burning off by blow lamps and cleaning with scraping and writing letters or figures of any descrption (Block, Roman, Italic or Indian) or arrows (upto 40 cm long) including directed Stops, comma, short liines, dashes, hyphens, brackets, etc complete all as specified and as directed.

M & L for PVC (SWR) floor trap, 75 mm dia plain with grating including jointing with solvent cement etc complete all as specified and as directed

M & L for PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement complete all as specified and as directed

M/S NAVEEN BUILDERS