Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹42.5 LAccepted-AOC | 1 | Accepted-AOC Due to L-1 and credit | |
| 2 | 2₹44.7 L+₹86,395 (1.97%)Rejected-Finance 16 21 D 2 HARJU PURA TAJGANJ AGRA | AGRA | AGRA | UTTAR PRADESH | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹49.2 L+₹5.3 L (12.2%)Rejected-Finance | 3 | Rejected-Finance Being other than L-1 | |
| 4 | Rejected-Technical | - | Rejected-Technical No response recied regarding shorfall documnets till time |
Tender Value
₹48.8 L
EMD Value
₹99,600
Closing Date
17 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Adm Area Agra 282008
GE (AF) Adm Area Agra 282008
REPAIR REPLACEMENT OF JOINERY IN CERTAIN MD ACCNS UNDER AGE BR-I OF GE(AF) ADM AREA AT AF STN AGRA.
2023_MES_633973_1
8000-2102/E8
Open Tender
Civil Works
Item Rate
180 days
AF Station Agra
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE AF Adm Area Agra
₹99,600
Yes
23 Feb 2024
22 Dec 2023
19 Jan 2024
22 Dec 2023
17 Jan 2024
5 Jan 2024
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm each complete all as specified and directed.
S&F solid PVC door frames of size 50mm x 47mm made out of 5mm single side prelaminated PVC sheet and edges will be painted to match with prelaminated sheet reinforced with MS square tube complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either toside and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in M.S frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement in the frame at site complete all as specified and directed..
S&F 75 mm size butt hinges stainless steel medium weight complete all as specified and directed complete all as specified and directed.
S&F 100 mm long aluminium handles cast type anodised complete all as specified and directed.
S&F 125mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed..
Taking down chowkhats with shutters (without taking off shutter from the frames) exc 1.50 Sqm and not exc 4.00 Sqm each complete all as specified and directed.
S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 35mm thick skelton/gauged shutter factory made open rebated and prepared to receive glass gauged etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a), complete all as specified and directed.
S&F for box type Steel windows / ventilators with pressed steel frame made out of 1.25 mm thick steel having two rebate with glazed shutters and fly proofing shutters including guard bars, 75 mm thick hinges, 150 mm tower bolt, 150 mm handle and locking arrangements etc complete all as specified and shown in TD drg CE/Ald/TD-172 sheet 1/2 & 2/2.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specifed and directed. (Note :- Quoted rates shall be deemed to include the cost of any type of beading required for fixing the wire mesh etc.)
S&F plain sheet glass 3mm thick , ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each complete all as specified and directed.
S&F 100 mm size butt hinges stainless steel medium weight complete all as specified and directed.
S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 150 mm size aluminium anodised alloy handles fabricated type complete all as specified and directed.
S&F 250 mm long aluminium sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed.
S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed. (Note :- Quoted rates shall be deemed to include the cost of any type of beading required for fixing the wire mesh etc.)
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint including one coat of red oxide complete all as specified and directed.
S&F in repairs 3mm thick sheet glass , ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane including removing/ hacking out old broken glass wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads including hacking out old broken glass exc 1.50 sqm panes (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F in repair framed work as in doors chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe-290 (Gde E165) including dismantling of wrought iron or mild steel work of any description complete all as specified and directed.
M&L for PCC (1:3:6) type B-0 with using 12.5 mm graded stone aggregated as in cill, step and for inserting hold fast of doors and windows complete all as specified and directed.
M&L for mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint including one coat of red oxide complete all as specified and directed.
S&F stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets and finials fency type, stops fixed with ss screws etc complete all as specified and directed. Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.
M&L for 10mm thick cement plaster in CM (1:6) on fair faces of brick work finished even and smooth without using extra cement including taking down cement plaster on brick wall including racking out joints, hacking for key, scrrubing down with water etc complete all as specified and directed
M & L for rendering in cement plaster in 15 mm thick on other than fair faces of brick work , cement finished even & fair in CM 1:4 including taking down cement plaster on brick wall including racking out joints, hacking for key, scrrubing down with water etc complete all as specified and directed
M&L for two coat of oil bound distemper after preparation of new plastered surfaces of wall over a coat of clear cholle primer and including 1mm thick wall care putty complete all as specified and directed.
M&L for preparing old decorated surface of walls and applying two coat of cement base paint including prepration of surfaces complete all as specified and directed.
M&L for 12 mm thick frosted glass, cut to size, width not exc 1.8 RM and height not exc 2.1 RM of each panel, homogenious colour fixed in frames including necessary fittings, fixtures, brackets and accessories as required and removing old glass of any description complete all as specified and directed.
S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and directed.
S & F powder coated anodised aluminium window and ventilator shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screw, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified (Top / Bottom 20736=0.547kg/Rm complete all as specified and directed.
S & F 4 mm thick sheet glass ordinary quality and glazing complete with beads fixed with screws in square not exc. 0.50 sqm in each pane complete all as specified and directed.
S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F for Solid PVC Wall Lining consisting of 5mm thick coloured PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including taking down of existing wall panelling complete all as specified and directed.
S&F for 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per manufacturers instruction, specification including taking down of existing wall panelling complete all as specified and directed.
scjha&sons
M/s Pooran Singh and Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .