Construction of U-drain leading to Vadhanur Colony in Mannadipet Constituency, Puducherry

Amount

Code No: 3.11 Removal of unserviceable soil including excavation, loading and disposal upto 1000 m lead but excluding replacement by suitable soil which shall be paid separately as per Clause 305..

Code No: 2.6.1A Earth work in excavation over areas exceeding 30cm in depth, 1.5m in width as well as 10sqm on plan) including disposal of excavated earth lead upto 50m and lift upto 1.5m ; disposed earth to be levelled and neatly dresses -all kinds of soil

Code No: 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming ofbottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m -All kinds of soil

Code No: 2.27 Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete.

Code No: 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:3:6 (1 cement:3coarse sand : 6 graded stone aggregate 20mm nominal size)

Code No: 4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand : 10 graded stone aggregate 40mm nominal size)

Code No: 4.3.1 Centering shuttering including struttings, propping etc. and removal of form work for foundations, footings , bases for columns.- Using steel sheet with M.S.frames

Code No: 5.9.5 Centring and shuttering including strutting, propping etc. and emoval of form for: lintels, beams, plinth beams, girders, bressumers and cantilevers.- Using steel sheet with M.S.frames

Code No: 5.12 Providing ,hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands , copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centring, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete but excluding cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Code No: 5.3 Reinforced cement concrete work in beams , suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Code No: 7.12MO Randum rubble masonry (coursed) in cement sand mortar 1:3 in foundation upto a depth of 1.50 metres and 1.50 above ground/bed level.

Code No: 9.165.1A Providing and fixing of 65mm Godrej Navtal lock of 6 levers etc complete

Code No: 10.25.2 Steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using n structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works

Code No: 11.3.1 Cement concrete flooring 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate.

Code No: 13.50.3 Applying priming coat: with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works.

Code No: 13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand).

Code No: 5.22.7 Steel reinforcement for R.C.C.work kg including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more

Code No: PSR : 0118 Supplying and filling with 45mm HBG metal to the work site including cost of loading unloading and filling etc complete.

Code No: PSR : 0114 Supplying and filling with28.50mm HBG metal to the work site including cost of loading unloading and filling etc complete.

Code No: 19.32.1A Making soak pit with 45 x 45 cm with bricks of 110mm dia UPVC 2.5 m diameter 3 m deep dry brick honeycomb shaft class designation 75 and pipe (type B) 1.8 m long complete as per standard design with F.P.S bricks.

R MANOGARAN

K Ramayan

J RAJENDIRAN

R.SABARIMUTHU