REPAIR TO FLOORING MASONRY WORK PLASTERING AND CERTAIN MISCELLANEOUS WORK RELATED TO SPORTS FACILITIES IN ZONE-I AND ZONE-II UNDER AGE B R II AT PHASE I DRDO TOWNSHIP CV RAMAN NAGAR BENGALURU

Amount

S & F in repairs Superior Quality Acrylic Transparent Board of Size 180x105 cm, Thickness not less than 20mm, for Basket Ball Court with Solid Dunking Ring with 3 Galvanised Springs & Heavy Duty Nylon Net Best Quality Powder Coated with PU Paint all as specified and as directed. Make: Any standard make meeting to the standards of Basket ball Federation of India as approved by GE

Dismantling boarding like wooden flooring alongwith all connected items of any description, fixed in any position with nails screws all as specified and as directed

M& L for Anti Termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors all as specified and as directed

Supply & Fixing Air Cush Wooden Flooring (BWF Approved) with not less than 21 mm thick Teak Floor Board (the board must have bottom side with air pass groove) over 18 mm thick Pure EPDM Rubber Pad and 45mmx70mm SPF Runners (made of European Fir, Spruce, Pine Wood , fixed on the bottom side with 18mm EPDM thick air cushioning pads by nails through the two wings at 350 mm C/C), including a vapour barrier on the levelled sub floor and the end of the boards will be locked by inserting the edge grooves and fixed with suitable adhesive of Pidilite Fevicol SH or Equivalent. An expansion gap of 10 to 15mm will be left open between the wooden flooring and the surroundin tiled area wall. The surface must be machine sanded in uniform level and finished with nonskid MATT finish Imported Water based lacquer and game line marking must be carried out in required colours before applying finish coat all as specified and as directed. Note : The work shall be got carried out by a specialist agency certified by Badminton World Federation as approved by GE.

Taking down and replacing the following for 01 Squash Court having Floor Area, 6.30 M x 9.70 M complete all as specified and directed at site. (a) Supply and Installation of "Clear Tough" Free standing and Maintenance free glass back wall system conforming to the WSF (World Squash Federation) requirement made of 12 mm thick, micron clear toughened glass, with 4 panels & 1 door, 4 fins, fixtures & fittings and all other materials for erecting the glass wall system. The height of the glass wall should be atleast 2130mm above the finished floor level all as specified and as directed (b) Supply and Fixing in repairs of Sound Board made of Tin Sheet of 21SWG fitted on the bottom side of Front Wall. Total height 480mm inclusive of wooden frame all as specified and directed (c) Material and Labour for cleaning, machine sanding in uniform level and finished with water based lacquer for existing wooden floor finish for sports area without damaging the existing wooden floor. Game line marking must be carried out in required colours before applying the finish coat all as specified and as directed (d) Material and Labour for game line marking paint as per International Federation Standard in appropriate colours all as specified and as directed. Note: The work shall be got carried out by a specialist agency certified by World Squash Federation as approved by GE.

Material and Labour for 15mm thick toughned glass as in railings , hinged doors, partitions, authomatic doors and similar work including cutting to shape, drilling holes as required with and including provision of all fixing arrangement as required at site, complete all as specified and directed.

M& L for Anti termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same all as specified and as directed

Demolition of floor, hearth or wall tiling including cement mortar bedding (including bedding / backing coat), removing serviceable tiles to store and rubbish off the premises and disposing of debris outside MD land complete all as specified and as directed.

M&L 25 mm thick PCC 1 : 2 : 4 , type B0 (using 12.50 mm graded stone aggregate) as in floor with rough finish to receive tile screed/bedding layer complete all as specified and directed

M&L for 20mm thick Granite work (of any type) (table rubbed and premirror polished) in single piece in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in cement white (1:2) using marble dust with admixture of pigment to match the shade of granite, including making hole for gas pipe including half rounding the edges of granite, laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining/ skirting (veneering to wall) over 12mm thick back coat in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and as directed

Material and labour for Vitrified tiles flooring with Light shade 10 mm thick (Square / rectangular) tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Material and labour, for Vitrified tile, skirting/dado, light shade with 10 mm thick tiles of area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, on vertical surfaces as in skirting, dado, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including backing coat of 10 mm thick CM 1:3 complete all as specified and as directed.

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm ,as in floors set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10mm thick rendering in CM (1:3) complete all as specfied and directed.

Demolition of reinforced cement concrete (like cover slab ,kerb stone etc) of any description and any position not otherwise specifically provided for. and disposing off debris to outside the MOD land all as specified and as directed.

M& precast RCC 1:3:6 Type C1 using 20mm stone agregate as in cover slab of manhole, gully trap, drain etc set in CM 1:6 including formwork and all as speciifed and as directed

Material and labour for reinforced cement concrete 1:2:4 (Nominal mix), type B1, using 20 mm graded stone aggregates, Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M & L for use and waste of formwork for rough finished flat surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

Material and labour, steel reinforcement using TMT bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with mild steel wire (annealed) and not less than 0.9 mm dia complete all as specified and as directed.

Material and labour, steel reinforcement using TMT bars of 6 mm dia upto 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending and binding with mild steel wire (annealed) and not less than 0.9 mm dia complete all as specified and as directed

Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. laid, bedded & pointed in any mortar and removing debris outside MD land omplete all as specified.

Demolition of cement concrete in ground floor and paving n exc 15cm below or above ground level removing debris outside MD land complete all as specified.

Material & labour for Anti Termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.all as specified and as directed

M&L 75mm thick PCC in (1:3:6) mix, type C-1 using 20mm graded stone aggregate as in Plinth protection/Paving finished surfaces even and fair Incling without using extra cement icluding construction Joints complete all as specifiedand as directed..

M&L 75mm thick PCC in (1:4:8) mix, type D-2, using 40mm graded stone aggregate as in sub base of paving/plinth, Hard standing protection all as specified and as directed

S&F Chequered cement concrete commercial Tiles 25cm x 25cm x 20 to 22mm /30cmx30cmx20 to 25mm thick of with grey cement and pigment set jointed and pointed in neat cement slurry in floors and cut and polished laid over and including 15mm Screed in CM 1:6 including including taking old tiles all as specified and as directed.

M&L for sand filling under floors inclding watering and conslidation complete all as specified and directed.

S&F M-35 Grade machine pressed precast concrete interlocking paver block of 60mm thickness with grey cement and pigment any size and size conforming to IS15658 all as specified and directed.

M&L for PCC in 1 :3:6 mix, type C2 (using 40 mm graded stone aggregate) as in mass concrete including necessary form work if required complete all as specified and directed.

Providing and laying at or near ground level, factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm), including making drainage opening wherever required complete all as specified and as directed

Taking down removing vegetation growth/ plants of anyy size of area n exc 0.050 Sqm above Chajjas, roof slabs, parapet walls junction of SWR Pipe and Wall etc upto roots and applyying injecting chemical and making good the surface in CM 1:3 upto height of 16 m all as specified and as directed

Cleaning of roof top surfaces of any type/description, height by removing tree leaves and any other similar waste material carefully to avoid damage of existing roof treatment including cleaning of rain water pipes of any description and any size for smooth flowing of rain water and removing the debris out side MD land complete all as directed.

Uprooting shrubs/plant/flora & fauna on wall girth not exceeding 100mm from brick wall by cutting holes into masonry/walls for digging out roots and dosing Sulfuric/Phenolic Acid as per manufacturer's instruction to burn deep rooted tree roots and making good the disturbed area with cement mortar in CM 1:3 using water proofing compound including necessary scaffolding up to a height of 16 metre complete all as specified and directed.

Material and labour for, Plain Cement Concrete in 1:3:6 mix, type C1, using 20 mm graded stone aggregates as in surface channels or any other places including necessary formwork, complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitered/stopped end etc complete all as specified and directed

Demolition of cement concrete of any description and any position not otherwise specifically provided for. and disposing off debris to outside the MOD land all as specified and as directed.

Demolition of brick work or stone/boulder PCC black masonry, built in cement mortar etc and removing debris outside MD Land complete all as specified and directed.

Taking down cement plastering of any thickness on brick, concrete or stone walls, partitions, ceilings etc including raking out joints, hacking for key, scrubbing down with water etc, removal of rubbish off the premises.complete all as specified and directed.

M&L for PCC in 1 :4:8 mix, type D2 (using 40 mm graded stone aggregate) as in mass concrete including necessary form work if required complete all as specified and directed.

M&L precast cement concrete block masonry with solid block in1:3:6 mix, type C-1 ( using 20mm graded aggregate ), exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for Providing precast cement concrete solid building blocks or slabs in 1:2:4 mix, Type B1, (using 20m graded aggregate 10cm thick (with plain or interlocking joints as directed) setting in mortar 1:4, complete all as specified and as directed.

M& L 25 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. all as specified and as directed

M& L for Walling of Random Rubble Stone masonry using Bangalore Type Stone obtained from demolition, uncoursed, well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

M& L for Plain Cement Concrete in 1:2:4 mix,Type B1 using 20 mm graded stone aggregates as in coping including necessary formwork if required weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

Supply of Liquid water proofing compound all as specified and as directed

Taking down steel window with frame without taking off shutter (double leaf /triple lesf shutter with frame ie. fly-proof and glazed) from the frame n.exc 0.60 Sqm each including glass panes. mosquito proof mesh excluding grill all as specified and directed.

Taking down steel window with frame without taking off shutter (double/trible leaf double shutter with frame ie. glazed and fly-proof ) from the frame exc 0.60 Sqm and not exc 3 sqm each including glass panes. mosquito proof mesh excluding grill all as specified and directed.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator with or without louvers made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead/louver of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately) all as specified and as directed Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

Supply and fixing factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, locking arrangement etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Taking down chowkats or frame without taking off shutter from the frame n.exc 1.50 Sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge.

S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification.

Taking down chowkats / frame without taking off shutter (wooden/aluminium /steel etc) exc 1.50 Sqm and n.exc. 4 sqm each. complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings,providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as patch fittings, heavy duty stainless steel friction hinges, locking sets with stainless steel plates, handles, buffers, stopper etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as required as specified and as directed by the Engineer- in-Charge all complete as per direction of engineer-in-charge

S&F Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and as directed

Fixing only Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virginpolymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

M & L PCC in 1:3:6 mix, type C0 using 12.5mm graded stone aggregate as in filling the chowkats/frames complete all as specified and as directed.

Repair/Rescuing, easing and adjusting wooden door shutter of any description without taking off shutter from the frame, area of shutter exceeding 1.00 Sqm but not exceeding 2.00 Sqm each, including making good the disturbed area as per existing, complete all as specified and directed.

Repair to steel window/ventilator/shutter of any description including replacement of handle of any pattern, peg stay etc to make window/ventilator absoulity working condition including necessary welding area note exc 0.50 Sqm each including re-securing or easing and adjusting all as specified and as directed by Engineer-in-Charge.

Hacking out old broken glass (any thicknesss, size,quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

S & F in repair 4mm thick sheet glass ordinary quality and glazing with oil putty, or beading and necessary clips as squares n exc. 0.5 Sqm in each pane complete all as specified and directed.

S & F 4mm thick pin head figured glass and glazing with oil putty, or beading and necessary clips as square n exc. 0.5 Sqm in each pane complete all as specified and directed.

S & F 5.50mm thick sheet glass ( ground or obscured or frosted, on one side as required/ directed),and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed in repair complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete/ brick work including taking out embedded portion and making good disturbed ground complete all as specified and as directed

Dismantling of wrought iron or mild steel work of any description like in hand rail/gate/manhole cover/grill etc not otherwise provided for complete all as specified and as directed.

S&F Framed works such as grills, gratings, etc and hung as gates, fencing post including pintle hinges,stops hand made sliding bolts etc with end bars shouldered and /or riveted, or forged into spikes,framed guard bars, barred iron doors, ladders,framed balusters,walk ways,railings,frame work of water tanks and similar work con-forming to Fe-290 Gde -E-165 complete all as specified and as directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Fixing only for Mild Steel Framed works such as posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M& L for expanded Metal not exceeding 4 kg/sqm cut to length bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanized steel staples supplied and fixed complete to wood or steel members complete all as speciifeid and as directed

Providing and fixing in repairs GI Chain Link Fabric Fencing made of GI Wire of dia 4 mm PVC Coated to achieve outer dia not les than 5 mm in required colour and shade of required width in mesh size 50 x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers ass required incl dismantling of old chain link fencing for any description and any size, complete as per direction of Engineeer in Charge (MS Round Bar and Flat Bar pmeasured and paid separately) complete all as specified and as directed

Providing and fixing in repairs for GI Chain Link Fabric Fencing made of GI Wire of dia 4 mm of required width in mesh size 50 x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers ass required incl dismantling of old chain link fencing for anyy description and any size, complete as per direction of Engineeer in Charge (MS Round Bar and Flat Bar pmeasured and paid separately) complete all as specified and as directed

Taking down unserviceable barbed wire of any any description and in any position Supply and Fixing Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Material & Labour for providing and fixing stainless steel (Grade 316) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and as directed

Taking down boards of any description, in any position and any size as in shelves complete all as specified and directed.

S & F 18/ 19 Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one side and other side balancing white face ; fixed with screws to timber frame work all as specified and directed

S & F teak wood beading of size 20 mm x 6 mm on the exposed/edges surfaces of the particle board complete all as specified and as directed

S/F tubular curtain rail, stainless steel anodized 25 mm dia with brackets and all fixing arrangements all as specified & as directed including taking down unserviceable rod/rail complete all as specified and directed.

S& F Aluminium extruded section Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and as directed

S& F Aluminium extruded section Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed all as specified and as directed

S& F Aluminium extruded section Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed all as specified and as directed

S & F in repair fancy type stainless steel handle of size 100 mm long complete all as specified and as directed

S & F Extruded aluminium alloy handles, fabricated type, anodised 150mm long all as specified and as directed.

S & F in repair Aluminium anodised cast type handles 150mm long all as specified and as directed.

S & F Aluminium anodised barrel tower bolts of extruded section, 150 mm long all as specified and as directed.

S & F in repair Aluminium anodised barrel tower bolts of extruded section, 150 mm long all as specified and as directed.

S&F in repairs SS butt hinges medium weight of size 100 mm complete all as specified and directed.

S&F 100 mm Butt hinges, medium weight, cold rolled stainlesss steel, and fixed complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm complete all as specified and directed.

S & F door stopper of rubber and aluminium anodised alloy body, 150 mm size fixed all as specified and as directed.

S & F in repair door stopper of rubber and aluminium anodised alloy body, 150 mm size fixed all as specified and as directed.

S & F in repairs magnetic ball catches of standard type fixed complete all as specified and as directed

S&F in repairs mortice lock 200mm size Mortice lock (four levers), vertical type, brass body including handles”doors ,screwing and fixing all as specified and as directed.

S & F in repair aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long all as specified and as directed.

S&F in repair 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed

Taking down steel water tubing 15mm dia bore and connection concealed / fixed on wall under floor and removed from site all as specified and as directed. (Note (i) Taking down stop cock , bib taps and concealed tubing shall be measured and paid separately (ii) Cutting chases and making good will be measured and paid separately

Supplying and laying of CPVC pipes 16mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling/trenches or laying in floors surface/concealed with all fittings (such as tee, elbow, socket, union, short pieces) and complete all as specified. complete all as specified and directed. Note : i) Taps, valves if any shall be removed before taking down pipe. ii) Cutting chases and making good shall be measured and paid separately

Taking down steel water tubing 20mm dia bore and connection concealed / fixed on wall under floor and removed from site all as specified and as directed. (Note (i) Taking down stop cock , bib taps and concealed tubing shall be measured and paid separately (ii) Cutting chases and making good will be measured and paid separately

Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling/trenches or laying in floors surface/concealed with all fittings (such as tee, elbow, socket, union, short pieces) and complete all as specified. complete all as specified and directed. Note : i) Taps, valves if any shall be removed before taking down pipe. ii) Cutting chases and making good shall be measured and paid separately

Refixing 20mm bore water tubing surface/concealed in same/new location after cleaning and application of bituminous paint on concealed portion of tubing including cutting & threading pipe and provision of additional fittings such as socket, tee, elbow, union (if required) complete all as specified and directed. Note : i) Taps, valves if any shall be removed before taking down pipe. ii) Cutting chases and making good shall be measured and paid separately

Cutting chases pinning in making good for brick walls to facing where required and pointing in cement mortor 1:3 to ends or edges of concealed water tubing and similar work including making good cutting not exc 10CM girth.complete all as specified and directed.

S&F Vitreous china white wash down water closet pan (pedestal pattern) with PP soft closing seat cover, hinges, in cluding bottle trap fixing accessories set (excluding flushing cistern and flush pipe), including UPVC (SWR) ‘P’ or ‘S’ trap and connection to drain (or outgoing pipe) and to flush pipe, antisyphonic pipe fixed in repair including dismantling existing water closet etc complete all as specified and directed by GE”

S&F in repairs, EWC seat covers white closed patter with recessed bottom, including screws and connections complete all as per Cera makes or equivalent in other makes, removing debris outside MD land, complete all as specified and as directed

S&F in repairs 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S&F in repair Hand shower (Health Faucet) with 8mm dia, 1.2m long flexible tube in chrome finish and wall hook with NRV (Back flow preventer) fixed in position to wall, fixed in repair complete all as specified and directed by GE

S& F Vitreous China counter top wash basin, white, size 550 x 425 mm excluding waste, chain and plug and porcelain stopper but including brackets, including Waste coupling of PTMT(half or full threaded) (Minimumweight 32mm-45gms/40mm-60 gms) with 32mm bore PVC waste pipe minimum 800mm long with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed in repairs complete all as specified and as directed.

S & F in repair PVC connecting pipe 600mm long 15 mm dia both end having brass coupling nut and PVC washer all as specified and as directed.

Supply and fix in repair PVC waste pipe 32mm bore not less than 800mm long complete all as complete all as specified and directed

S & F in repair fancy type chromium plated 2 - Way bib cock with side handle, wall flange and aerator 15mm dia as all as specified and as directed.

S & F 15 mm pillar taps, cast copper alloy fancy type , chromium plated screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe including taking down old pillar taps complete all as specified and as directed.

S & F in repairs 15mm CP fancy type angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F in repair Chromium plated fancy type brass soap dish with wall hook complete all as specified and as directed.

Supply and fix in repair Stainless steel toilet paper holder with flap guard, fixed to wall with CP brass screws and PVC cleat, complete all as specified and directed by GE.

Supply and fixed in repair Single towel rail brass chromium plated 600mm long fixed with chromium plated screw and PVC cleat etc complete all as specified and directed.

Supply and fix in repair 100mm dia CP grating using white cement complete all as specified and direceted

S&F in repair PVC floor trap/Nahni Trap with plain/single hole PVC grating grating including jointing to waste pipe in cement joint, of outlet 75 mm.dia .

S & F 75mm dia outlet PVC multi floor trap with PVC grating grating including dismantling the damaged trap all as specified and as directed.

S & F PVC (SWR) bends any radius 75 mm dia of bore, including taking down old bends all as specified and as directed.

S & F PVC (SWR) branch piece single (single T) equal of bore 75 mm dia with access door in repairs all as specified and as directed

S & F PVC (SWR) branch piece single (single T) equal or unequal of bore 110 mm dia, with access door in repairs all as specified and as directed

S & F PVC (SWR) vent cowl of bore 110 mm dia, including taking down old PVC vent cowl all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, walls or in floors all as specified and as directed

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, walls or in floors all as specified and as directed

M & L Gun metal Gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed including cutting the old pipes as in repair complete all as specified and directed

S&F 500 Ltrs capacity rotational moulded polytheline water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including dismentling of unserviceable tank complete all as specified and directed.

S & F (SWR) UPVC pipes 110 mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil waste/vent pipes including taking up or down existing PVC pipes and connections complete all as specified and as directed..

S & F (SWR) UPVC pipes 75mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil waste/vent pipes including taking up or down existing PVC pipes and connections complete all as specified and as directed..

Removing demolished concrete materials/moorum/building rubbish/similar unservicable material by mechanical tranport including loading, transporting and unloading outside MD land complete all as specified and directed.

SHANMUGA CONSTRUCTION (BID ID -3494438)

Ashraya Nirman (BID ID -3493763)