REPAIR/MAINT OF DAMAGED WALLS, FLOORS, SANITARY FITTINGS, JOINERY, CHAJJAS AND ALLIED WORKS AT 10 AFH, REPAIR/MAINT OF FOOTPATH, DRAINS AND FENCING ALONG WITH ALLIED IN RS, TIPNIS AREA AND REPAIR/REPLACEMENT OF OLD/UNSV WATER SUPPLY LINES WITH CPVC

Amount

Taking down aluminium shutter and frame exc 1.5 but n.exc. 4 Sqm in each, complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows/ventilators and partitions etc., with one or more rebates including joining cleat for fixing etc., complete all as specified and directed.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified and directed.

S&F powder coated anodised aluminium window & ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m, with joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, complete all as specified and directed.

S&F powder coated aluminium three track sliding window with frame using standard medium weight sections of weight not less than 0.55 Kg/m excluding glazing with 4.8mm thick sheet glass stainless steel wire cloth (1.40mm aperture and 0.63mm dia) aluminium snap beadings, decogrill DG-102 and F channel etc, complete all as specified and directed.

S&F for plain sheet glass 5.5mm thick, of any colour and glazing with and including anodised aluminium snap beading or rubber/neoprene bead, fixed in aluminum frame either in window/ventilator or door frame, complete all as specified and directed.

S&F for 4.8mm thick sheet glass ordinary quality, glazing with and including rubber gasket not exc 0.50 Sqm in each pane, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S&F 4mm sheet glass,ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane in wooden/metal frame, complete all as specified and directed.

S & F in repair 7mm thick aluminium grill of make "Deco grill" and DG - 104 model fitted into suitable aluminium channel and fixed to windows/ventilators, complete all as specified and directed.

Taking down shutters of any description not exc. 1.0 Sqm each, complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm not exc. 2 Sqm each, complete all as specified and directed.

Taking down chowkats or frames not exc. 1.5 Sqm each with shutters without taking off shutters from the frames, complete all as specified and directed.

Taking down chowkats or frames exc. 1.5 Sqm but not exc. 4 Sqm each with shutters without taking off shutters from frame, complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed.

S&F factory made solid PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC C channel having PVC sheet strip of 20mm width stuck inside with solvent cement for syles and plain colour PVC sheet for top and lock rail and bottom rail on either side and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet used instead of plain colour PVC sheet. Stile and rails feathered at edges for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of both side prelam PVC sheet used instead of Plain colour PVC sheet. to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable prelam PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 35mm thick, second class hard wood, plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneers or ply wood, complete all as specified and directed.

S&F 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F 100mm long medium weight, cold rolled mild steel butt hinges, complete all as specified and directed.

S&F in repairs of floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm, complete all as specified and directed.

S&F earth bead rubber/plastic door protector guard/seal cover, under draft stopper ,double sided fixed to bottom of wall, complete all as specified and directed.

S&F in repairs 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F in repairs stainless steel 25mm powder coated fancy type curtain rod with brackets, of any length fixed in repairs, complete all as specified and directed.

S&F in repairs PVC coated mild steel curtain rod 25mm dia of any colour and pattern, complete all as specified and directed.

S&F in repairs PVC coated mild steel curtain brackets 25mm dia of any length, complete all as specified and directed.

M&L for plain fillets 2nd class softwood not exc 3 Sqcm in square, rectangular or triangular in section, clean sawn, secured with nails or brads, complete all as specified and directed.

S&F in repairs 100mm long medium weight, cold rolled mild steel butt hinges, complete all as specified and directed.

S&F in repairs 125mm long medium weight cold rolled mild steel butt hinges, complete all as specified and directed.

S&F in repairs 100mm long aluminium, anodized, barrel tower bolts of extruded section, complete all as specified and directed.

S&F in repairs 150mm long aluminium, anodized, barrel tower bolts of extruded section, complete all as specified and directed.

S&F in repairs 100mm long extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.

S&F in repairs 100mm long stainles steel handels for cupboard, complete all as specified and directed.

S&F in repairs 150mm long extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.

M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.

S & F for factory made ready to install non toxic-lead & cadmium free, single extruded 18mm thick prelaminated one side solid (non hollow) PVC board as in shutters of cupboards and fixing with and including stainless steel continuous piano hinges and polishing with matching shade to the cutting face of PVC board for shutter, complete alll as specified and directed. Note: Builders hardware except piano hinge shall be measured and paid seperately.

S & F factory made ready to install non toxic-lead & cadmium free, single extruded 18mm thick Solid (non hollow) PVC board as in shelves of cupboards fixed with screws over PVC supports as manufacturer's instructions, complete alll as specified and directed.

Resecuring (or) easing and adjusting without taking down shutters of any description exc. 1 Sqm but not exc. 2 Sqm, complete alll as specified and directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple, complete all as specified and directed.

S & F in repairs mortice lock, vertical type of size 75mm, 6 Levers with 2 keys of godrej make, complete all as specified and directed.

Taking down aluminium doors/window shutters of any size carrying out minor repairs/adjacement of shutther or frame including rubber beading, aluminium beads, cleats of required size and refixing in same position, complete all as specified and directed.

S & F in repairs door clooser aluminium extruded section body hydraulically regulated , designation No.2 , universal type , suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg, complete all as specified and directed.

Preparing new wooden surfaces of any description exc. 10cm width or gridth and applying two coats of synthetic enamel paint over a coat of wood primer, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (triple layer) (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old water tank, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (triple layer) (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe inculding dismantling of old water tank, complete all as specified and directed.

S&F in repairs lid (cover) for polyethylene water storage tank exc. 500 litres and not exc.2000 litres including fixing PTMT nut/binding wire and hinges set, complete all as specified and directed.

S&F in repairs stop valves, cast copper alloy, chromium plated fancy type with capstan head screwed down, high pressure, screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed.

S&F in repairs stop valves, fancy type, chromium plated with longshank (concealed type) cast copper alloy, with capstan head screwed down, high pressure, screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed.

S&F in repairs cast copper alloy chromium plated, angle cock, screwed for 15mm bore iron pipe, complete all as specified and directed.

S&F in repair bib taps, cast copper alloy chromium plated fancy type with capstan head, screwed down, screwed for 15mm dia iron pipe, complete all as specified and directed.

S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed for 15mm dia iron pipe, complete all as specified and directed.

S&F in repairs for 125mm dia stainless steel chromium plated shower rose with swivel joints, complete all as specified and directed.

S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinge device (Indian/ Anglo indian), complete all as specified and directed.

S & F in repairs vitreous China wash hand basin white, flat back, size 630 x 450mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand, complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed.

S & F in repairs vitreous china urinal, bowl type flat back of size 465 x 355 x 265mm white (minimum), with grating and union for discharge pipe, complete all as specified and directed.

S & F in repairs chromium plated hand shower, health faucet with 8mm dia 1 m long flexible tube, wall hook of make jaquar allied range Model No 577 or equivalent approved make, complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.

S&F in repair 110mm dia stainless steel grating fixed with white cement, complete all as specified and directed.

S&F in repair 75mm dia stainless steel grating fixed with white cement, complete all as specified and directed.

S&F in repair 110mm dia gratings of PTMT (minimum weight 25gms), complete all as specified and directed.

S&F in repair 15mm bore, 45cm long PTMT PVC connecting pipe fitted with brass union to connect iron pipe to PVC pipe on both ends and fixed, complete all as specified and directed.

S&F in repair low density waste pipe 40mm dia for working pressure rating 4 Kg/Sqcm with polyethylene union and check nuts 75cm long suitable for steel sink, complete all as specified and directed.

S&F in repair 32mm dia PVC waste pipes 900mm long, complete all as specified and directed.

S&F in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms), complete all as specified and directed.

S & F in repairs 10 Liters capacity, low level flushing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe, complete all as specified and directed.

S & F in repairs, 25mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms), complete all as specified and directed.

Taking up or down of 16mm outer dia, CPVC pipes SDR 11 & plain CPVC SDR 11 fittings and connections, including cleaning for refixing or removal from site, complete all as specified and directed.

Refixing old 16mm bore CPVC pipes and connections in new or old position (walls, ceiling, floors etc), complete all as specified and directed.

S & F in repairs 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed complete to walls, ceiling or laid in floors including testing, complete all as specified and directed.

Taking up or down of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and connections, including cleaning for refixing, complete all as specified and directed.

Refixing old 20mm dia CPVC pipes and connections in new or old position (walls, ceilings, floors etc.), complete all as specified and directed.

S & F in repairs 20mm bore outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed complete to walls, ceiling or laid in floors including testing after taking down old pipes, complete all as specified and directed.

S&F in repairs PPR Gate valves 20mm bore, complete all as specified and directed.

S&F 100mm dia cast iron floor trap/nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4), type B-1, complete all as specified and directed.

S&F 15mm dia two way bib taps with wall flange fancy type, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F for towel ring round with round flange, complete all as specified and directed.

S&F in repair sinks made of stainless steel with drainage board 1mm thick with plugs and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe size 915mmx460mm bowl size 410mmx330mmx160mm including waste pipe & coupling 32mm, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on brick/stone masonry surfaces finishing even and smooth without using extra cement, complete all as specified and directed.

All as per above item No. 82 but plastering on walls inside plumbing shafts, complete all as specified and directed.

Supply only approved integral water proofing compound, complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement, complete all as specified and directed.

Demolition of brick work built in cement mortar incl all quions, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.

M&L for preparing new plastered surfaces by applying two coats of distemper oil emulsion over a coat of primer with one coat of putty on surfaces of walls, complete all as specified and directed.

M & L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces after preparation of new external surfaces of wall, chajja, facia etc as per manufacturer's instruction, complete all as specified and directed.

M&L for preparing newly plastered wall surfaces and applying three coats of white wash, complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15cm thickness, (below or above ground level) and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m, complete all as specified and directed.

M&L for 50mm thick plain cement concrete(1:2:4) type B-2 (using 40mm graded crushed stone aggregate) as in flooring, surfaces finished even and fair, complete all as specified and directed..

M & L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed with white cement and pigment to match laid over and including 15mm thick screed bed of cement mortar (1:6), complete all as specified and directed.

M&L PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for, complete all as specified and directed

M & L for precast cement concrete (1:2:4), type B1 (using 20mm graded crushed stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar (1:4), complete all as specified and directed.

M& L for TMT bars 10mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, or securing with clips, complete all as specified and directed.

All as per above item No. 97 but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders, complete all as specified and directed.

M&L TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to GD-I. IS-432 (Part I), complete all as specified and directed.

M&L for surface preparation incl applying water proofing treatment with water proofing chemical two coats with primer all as per manufacturer instructions such as asian paint polyurea coating /Dr. fixit proof cote white/pedilite/con plast 200/ to arrest seepage at isolated places or in patches, complete all as specified and directed. Note:-The rate deemed to include for T& P and post completion of water proofing test to check for water tightness & leak free condition with a warranty of minimum 02 year period)

Dismantaling fencing wire mesh any type, complete all as specified and directed.

Dismantaling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC)any section, including taking out embedded portion and making good disturbed ground post embedded in natural ground, complete all as specified and directed.

S&F in repair harison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed.

M & L for brick work with sub-class ‘B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4), complete all as specified and directed.

M & L for brick work with sub-class ‘B' bricks, straight or curved on plan to any radius as in half brick thick wall built in cement mortar (1:4), complete all as specified and directed.

M&L for reinforced cement concrete (1:1.5:3), type A-1 (Nominal Mix) (20mm graded crushed stone aggregate) as in columns, pillars, piers, post and struts, complete all as specified and directed

M&L for form work sides of posts, pillars, columns etc with fair finished surfaces, complete all as specified and directed.

M & L 75mm thick plain cement concrete (1:3:6), type B-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement, complete as specified and directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors; ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L for providing reinforced cement concrete (1:2:4) type B-1, (20mm graded crushed stone aggregate) In precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 Sqcm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed, complete all as specified and directed.

M&L for MS angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

M&L for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, complete all as specified and directed.

All as per above item No. 113 but fixed in repair, complete all as specified and directed.

All as per above item No. 113 but restaining resecuring including making good staples etc., complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed.

Supply only chain link MS galvanised fencing, any size or type, complete all as specified and directed.

S&F for mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with hexagonal or square washers and one nut not exc 5cm long 10mm dia neck, complete all as specified and directed.

M&L for preparation of plastered new surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of white wash etc, complete all as specified and directed.

M&L for two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide zinc chrome primer on newly untreated steel surfaces of any description, over 10cm in width or girth,not otherwise described including preparation of surfaces, complete all as specified and directed.

Excavation in post holes each n.exc. 0.50 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance n. exc 50m and making good surface in hard/dense soil etc, complete all as specified and directed.

M & L PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete etc., complete all as specified and directed.

M&L for providing PCC (1:3:6), type C-2 (using 40mm graded crushed stone aggregate) as in drains/surface, channels including form work, complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in floor,path etc finishing the surface rough to receive tiles, complete all as specified and directed.

M&L for pre polished coloured cement concrete chequred tiles of approved quality size 300X300X 25mm thick on floors laid over and including 20mm thick screed bed CM (1:6) set and jointed in neat cement slurry and pointed with colour cement to match the tiles, complete all as specified and directed.

M&L PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, hold fast blocks, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M & L for RCC (1:1.5:3) type A-1 (using 20mm graded crushed stone aggregate) as in roof slab supported on walls, beams, sloping type RCC slab for septic tank etc, complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landinqs and similar work; not exceeding 200mm thick (horizontal or sloping for flat)crushed stone, complete all as specified and directed.

Excavation in trenches not exe. 1.5 M in depth and not exc. 1.5 M in width including getting out for laying pipes etc including forming bottom surface to required level in soft/loose soil, complete all as specified and directed.

Returning, filling including spreading levelling watering and well ramming in layers not exc. 25cm thick, complete all as specified and directed.

Removing surplus soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m from the starting poing, complete all as specified and directed.

M & L for road cutting/removing the hard standing/cutting plinth protection of building/path for laying of pipe line of any size, complete all as specified and directed.

S&F in repair CPVC pipe of size 75mm inner dia in trenches high pressure CPVC pipes schedule 40 pipes and plain CPVC schedule 80 fittings including all necessay fittings, like elbow, tee, socket, reducer, bushings , step over bends ,end caps, end plugs, etc and with CPVC solvents cement including taking down old unserviceble GI pipes, complete all as specified and directed.

Supply and fix in replacement CPVC pipe of size 50mm outer dia in trenches high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, like elbow, tee, socket, reducer, bushings , step over bends ,end caps, end plugs, etc and with CPVC solvents cement including taking down old unserviceble pipes, complete all as specified and directed.

Supply and fix in replacement CPVC pipe of size 25mm outer dia in trenches high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, like elbow, tee, socket, reducer, bushings, step over bends ,end caps, end plugs, etc and with CPVC solvents cement including taking down old unserviceble pipes, complete all as specified and directed.

M & L for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) complete for making good to the excvated portion of road/hard standing etc, complete all as specified and directed.

M & L for cutting existing steel tubing of size 40/50mm for alterations or additions (each cut measured), complete all as specified and directed.

M & L for screwing existing steel tubing of size 40/50 mm for alterations or additions (or lengthening screw on pipe to form connector), complete all as specified and directed.

M & L for CPVC ball valve of size 50mm dia suitable for CPVC pipe incl necessary fittings and taking down old unserviceble ball valve, complete all specified and directed.

M & L for CPVC ball valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings and taking down old unserviceble ball valve, complete all specified and directed.

Supply and fix gun metal gate/globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC pipe of outer dia 50mm and taking down old unsrviceble valves, complete all as specified and directed.

Supply and fix gun metal gate/globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC pipe of outer dia 40mm and taking down old unsrviceble valves, complete all as specified and directed.

Supply and fix gun metal gate/globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC pipe of outer dia 25mm and taking down old unsrviceble valves, complete all as specified and directed.

M & L for taking up or down steel tubing and connections, of size 40/50mm including cleaning for refixing or removal to store, complete all as specified and directed.

M & L for refixing old steel tubing of 40/50mm dia and connections in new or old position (walls, ceiling, floors,trench etc.), complete all as specified and directed. Note: An amount of Rs.89570.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

SHRI SURAJIT SIKDER

M/S ANNI ENTERPRISE

CONSTRUCTION SHELTER

M/S. JOGINDER KUMAR GOYAL

M/S ASHOK ENTERPRISE

MAJUMDER ENTERPRISE

M/S DEY ENTERPRISE