GE/Token-50/2025-26

Amount

Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loose or disintegrated soil complete all as specified by Engineer-in-Charge .Note; Most of the Excavation will be done manually and no extra cost will be paid to contractor seperately for manual excavation. If any UG Cables, Pipes are damaged during excavation,entire cost for restoration will be borne by the contractor.

All as per item no 1 above but depth exc 1.5 m but not exc 3.00 m complete all as specified by Engineer-in-Charge.

M&L PCC 1 : 4 : 8 type D2 using 40mm graded stone aggregates as in foundation of manholes, drains, posts etc complete all as specified by Engineer-in-Charge.

M&L for brick work with sub class 'B' bricks old size bricks strainght or curved on plan exc 6m mean radius built in CM 1 : 4 including demolition complete all as specified by Engineer-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 finished even and smooth without using extra cement including water proofing compound complete all as specified by Engineer-in-Charge. Note : Water proofing compound shall be measured separately under appropriate items.

Supply only Integral waterproofing compound complete all as specified by Engineer-in-Charge.

Demolition and breaking up drain pipes of 150mm dia and more (Salt glazed ware, AC or Reinforced concrete) set in cement mortar.

Demolition and breaking up drain pipes of 200mm dia and more (Salt glazed ware, AC or Reinforced concrete) set in cement mortar.

S&F DWCPE(SN4) 150mm diameter sewage pipes including snap fit coupler and rubber ring incl testing, properly jointing and laying in trenches to a level bed complete all as specified by Engineer-in-Charge.

S&F DWCPE(SN4) 200mm diameter sewage pipes including snap fit coupler and rubber ring incl testing ,properly jointing and laying in trenches to a level bed complete all as specified by Engineer-in-Charge.

M & L for concrete (1:3:6) type C2 as in bed suitable for 150 mm bore of pipes including forming cradles; complete all as specified by Engineer-in-Charge.

M & L for concrete (1:3:6) type C2 as in bed suitable for 200 mm bore of pipes including forming cradles; complete all as specified by Engineer-in-Charge.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose/disintegrated soil or rocks complete all as specified.

Removing excavated material rocks to a distance exc 1.5 kms but n exc 5 km and depositing where directed.

M&L for providing cement concrete coping with plain fair faces incl chamferes, weathering, throating etc type B1, 1 : 2 : 4 using 20mm graded aggregate and set in CM 1 : 4 complete all as specified.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section) in cement concrete 1:2:4 type B1 finished smooth and reforming benching as required for 150 mm or 200 mm dia pipes complete all as specified.

S&F Precast plastic fibre reinforced concrete man hole covers" medium duty " of overall size 1000 mm x 500 mm x 75 to 80 mm factary made complete all as specified and directed.

Cleaning of EWC's, IWC's, bottle traps, Nahani traps, gully traps and floor traps etc and CI/ PVC pipes all types top to bottom including junctions etc, cleaning of sewage line upto GT in the area of Old/New APS, Signal enclave and adjoining area (Md accn and all types of Accn) complete all as specified by Engineer-in-Charge.

Cleaning of GT's in the area of Old/New APS, Signal enclave, Sanjay Vihar and adjoining area as (Md accn and all types of Accn)complete all as specified by Engineer-in-Charge.

Cleaning of manhole depth of upto 1.8 m in the area of Old/New APS, Signal enclave, Sanjay Vihar and adjoining area as (Md accn and all types of Accn) and taking out sludge and depositing them to notified area by Municipal corp of delhi for dumping or out side Defence land complete all as specified by Engineer-in-Charge.

Cleaning of Manhole depth exc 1.8 m in the area of Old/New APS, Signal enclave, Sanjay Vihar and adjoining area as (Md accn and all types of Accn) including removal of all waste etc obtained during cleaning of sewage line within 500 m range complete all as specified by Engineer-in-Charge.

Cleaning of Sewage line from GT to Ist Manhole in the area of Old/New APS, Signal enclave, Sanjay Vihar and adjoining area as (Md accn and all types of Accn) including removal of all waste etc obtained during cleaning of sewage line within 500 m range complete all as specified by Engineer-in-Charge.

Cleaning of sewage line n.exc 10 m in length iin the area of Old/New APS, Signal enclave, Sanjay Vihar and adjoining area as (Md accn and all types of Accn) including removal of all waste etc obtained during cleaning of sewage line within 500 m range complete all as specified by Engineer-in-Charge.

Cleaning of Sewage line 0.00mtr to 20.00 m in length in the area of Old/New APS, Signal enclave, Sanjay Vihar and adjoining area as (Md accn and all types of Accn) including removal of all waste etc obtained during cleaning of sewage line within 500 m range complete all as specified by Engineer-in-Charge . (Note :- This item will be measured if length exceed from 10.00mtr).

Cleaning of Sewage line exc 20.00 mtr but not exc 30.00mtr in length in the area of Old/New APS, Signal enclave, Sanjay Vihar and adjoining area as (Md accn and all types of Accn) including removal of all waste etc obtained during cleaning of sewage line within 500 m range complete all as directed and as specified. Note :- This item will be measured if length exceed from 20.00mtr).

Cleaning of Sewage line 0.00mtr to 50.00mtr and exceeding in length in the area of Old/New APS, Signal enclave, Sanjay Vihar and adjoining area as (Md accn and all types of Accn) including removal of all waste etc obtained during cleaning of sewage line within 500 m range complete all as specified by Engineer-in-Charge (Note :- This item will be measured if length exceed from 30.00mtr.) Note :- For execution of item srl No 18 to 26 above agency should deploy minimum of 04 Nos of Safaiwala and 01 No supervisior on all days of the month/year during the contract period including Sunday and Holidays so as to complaints are attended prompty within 04 hours so that health and life troops and their families may not be adversly affected. The Delay in rectification of complaint more than four hours, the penality will be levied @ Rs.100.00 Per complaint.

Demolition of cement concrete to ground floor(unreinforced) and paving n.exc 15cm thickness (below or above ground level) and removing rubbish of out side MOD land.

M&L 75mm thick PCC (1:4:8) type D 2 (40mm graded stone aggregate) as in sub base, complete all as specified.

M&L Sand filling (sand cushioning) under floors or in foundation incl watering and consolidation all as spd and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment all as spd and directed.

M & L for rendering on fair surfaces of Brick work in CM (1:4), 15 mm thick, fair and even, preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistent primer on walls complete all as specified by Engineer-in-Charge.

M & L complete removal of existing treatment and preparation of old plastered surfaces and applying two coats of cement base paint over a coat of anti alkaline primer complete all as specified by Engineer-in-Charge.

S & F in repairs 100 mm dia cast iron (spun pipe) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls/floors/trenches etc complete all as specified by Engineer-in-Charge Note : For pipes fixed on walls to be suitably clamped using stack clamps to maintain 10 to 15 cm distance from the wall (rates inclusive in this item) of appropriate size @ 2 m apart for height of pipe) and all the necessary scaffolding, padding, trestles required for carrying out work should be borne by the contractor in this item only and nothing extra should be paid to contractor for height of building upto G+5.

S & F in repairs 75 mm dia cast iron (spun pipe) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls/floors/trenches etc complete all as specified by Engineer-in-Charge Note : For pipes fixed on walls to be suitably clamped using stack clamps to maintain 10 to 15 cm distance from the wall (rates inclusive in this item) of appropriate size @ 2 m apart for height of pipe) and all the necessary scaffolding, padding, trestles required for carrying out work should be borne by the contractor in this item only and nothing extra should be paid to contractor for height of building upto G+5.

S & F in repairs Cast iron Bends of 100mm dia (any radius), diminishing pieces or tapers (larger bore measured) etc complete all as specified by Engineer-in-Charge Note :- All the necessary scaffolding, padding, trestles required for carrying out work should be borne by the contractor in this item only and nothing extra should be paid to contractor for height of building upto G+5.

S & F in repairs cast iron Bends of 75mm dia (any radius), diminishing pieces or tapers (larger bore measured) etc complete all as specified by Engineer-in-Charge Note :- All the necessary scaffolding, padding, trestles required for carrying out work should be borne by the contractor in this item only and nothing extra should be paid to contractor for height of building upto G+5.

S&F for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair of PVC (SWR) bends any radius of 110mm bore complete all as specified

S&F in repair of PVC (SWR) bends any radius of 75mm bore complete all as specified

Mechanically used high pressure Super Sucker Machine capable of Air lifting of dense sludge like muds, slurry, small stones, debries, grits etc from sewer lines/Manholes thorough vaccum mode and capable of Jetting sewer lines of any dia. The machine shall be used by the contractor as per direction of Engineer-in-Charge as on required basis. Job shall be completed to the entire satisfaction of GE..( For ,Sanjay vihar ,Old / New APS Signal encalve and adjoining area ) Note: Rates quoted cleaned for 08 hrs of super sucker machine. Any work carried out throughout 08 hrs shall be measured as on Job.

Talking down Submain wiring any type, any size & any capacity all as directed

Taking down old unsv light fitting of any size and make from the site and making good surface complete all as specified.

Taking down old MCCB , TPN DBs , SPN DBs, & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matching for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4 Sqmm size stranded conductor as earthwire.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matching for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 6 Sqmm size stranded conductor as earthwire.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 10 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matching for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 10 Sqmm size stranded conductor as earthwire.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.90, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 110 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete.

Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 900 lm system lumen output with life time of 25000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.90, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficacy at luminarie level > 110 Lumens/wat and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete.

Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 25,000 burning hours at L70 criteria, Power Factor >0.90, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete.

Supply and fix 45 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 110 > lm/W with a life class of 25,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 25mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete.

S&F angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete.

S & F LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base .

Taking down carefully geysers 25/35/50 ltrs capacity opening for inspection reassembling and re-fixing in position after carrying out repairs rates included for replacement of pressed rubber gasket nuts, bolts etc complete all as directed. Note- Spare Parts such as tank, apparatus plate, outer body shall be measured and paid separately under relevant item of supply only.

S&F in replacement only base plate assembly (confirming to ISI ) complete for 25/35 Ltrs capacity copper tank geyser including inlet, outlet and thermostat pipe with drain plug and screws for fixing the element inclusive of clamps for holding the elements with nut, bolts & air release valve suitable for any type/make of geysers installed at site as directed.

S&F in replacement of thermostat for 25/35/50 ltrs capacity of geysers complete all as directed.

S&F in replacement heating element of 2.0 KW triangular type with nut bolt washer complete all as directed.

M&L for safety pressure valve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge.

M & L chromium plated copper connection pipe 60 Cm long with two brass adopters and connecting up complete all as directed.

Supply only inner still tank for geysers of capacity 25/35 ltr as per existing of approved make complete all as directed.

S&F MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar, neutral link earth link complete.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complet.

S & F 240V, 10 KA 'B' curve MCB SPN and current carrying capacity 40 Amps in the MCB DB Complete with connection testing and commissioning. all as specified and directed.

MS & F 240V, 10 KA 'B' curve MCB SP and current carrying capacity 6 to 32 Amps in the MCB DB Complete with connection testing and commissioning. all as specified and directed.

Supply & fix in repair factory made epoxy powder coated Distribution Board VTPN-4 ways (IP-43 protection), mechanical impact strength IK - 08, with cement spill protector double door fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to HSN code : 8537. Make : Indo Asian Cat Part No : 811870 or equivalent. Note :- MCCB & MCB will be measured & paid separately.

S & F MCCB 200 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting.

S & F MCCB 160 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting.

S & F MCCB 125 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting.

S & F MCCB 100 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting.

S& F in replacement recessed mounting LED FLAT panel 2"x2" made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20 Suitable for 36 watt,230 volts ,50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete all as specified and directed.

S & F fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge.

S&F exhaust fans AC single phase 230/240 V of size 300 mm sweep, Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, heavy duty, metal body with louvers for fixing of exhaust fan complete.

Supply & fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed.

Supply & fixing fresh air fan motor 230 volts AC, 50 Hz suitable for 250 mm size ftesh air fan complete all as directed.

Supply & fixing fresh air fan motor 230 volts AC, 50 Hz suitable for 200 mm size ftesh air fan complete all as directed.

S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 10 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete.

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed

Supply & Fix of wall fan 400 mm 3 blade in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site complete all as specified and directed by Engineer-in-Charge.

Clening of LT panel of board indoor type of size 1050x150x1200mm (approx) or any type & sizes made out of 2 mm thick CRCA sheet suitable for 415 volts, 3 phase, 4 wire, duly painted with two coats of synthetic enamelled paint and checking of all MCCB/MCB and connected wiring all as specified and as directed by Engineer-in-Charge Note : If require MCCB/MCB to be measured & paid separately.

Supply & Fix all accessories of PCB BLDC ceiling fan including remote any type, any make & any capacity including taking down carefully ceiling fan & refixing the same as per requirement at site complete all as specified & directed by Engineer-in- Charge

Schedule of Credit

A R S CONSTRUCTION CO (BID ID -3435655)

M/s SAAR ENGINEERS (BID ID -3435810)