SPECIAL REPAIR TO B/R WORKS IN WATCH TOWERS, PROVN OF SHED FOR ASSEMBLY AREA IN AF SCHOOL, PROVN OF SHED NEAR MTR S AND CERTAIN BR EM MINOR WORKS AT AFS KANHERI HILLS UNDER GE AF THANE

Amount

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortor complete all as specified.

M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20mm thick screed bed in CM 1:4 for laying floor finishes complete all as specified and directed

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 15mm thick screed bed or bedding layer in CM(1:4) complete as specified and as directed.

M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20mm thick screed bed in CM 1:4 for laying floor finishes complete all as specified and directed

Demolition of un-reinforced cement concrete in any position complete all as specified.

M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as directed by Engr-in-Charge.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified.

All as per Srl Item No 7.00 above here in before but size exceeding 1.5 Square metre and not exceeding 4 Square metre each.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) Frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket tc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, luminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM Rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved esign/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

S&F Hydraulic door closer of aluminium die cast body,designation No-3 universal type suitable for door shutter of 851 mm to 1000 mm weight between 61 Kg to 80 kg etc, complete all as specified.

S&F 4mm thick Sheet glass, ordinary quality and glazing with glazing clip and powder coated aluminium beading in square n exc 0.5 sq. m in each pane

S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with powder coated aluminium beading/wood beading.

S&F for 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.

S&F for 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22

S&F Brass mortice lock 100 mm,4 levers, vertical type, fixed to cupboard shutters, complete all as specified.

S&F for providing and fixing zinc alloy roller for sliding window/ aluminium sections with necessary screws etc. , complete all as specified.

S&F for Zinc alloy (powder coated) casement lock for windows with necessary screws etc , complete all as specified.

Demolition of brickwork or stone boulders masonry built in CM for foundation etc or for shafts, walls cesspits, manholes etc complete all as specified and directed by Engr-in-Charge.

M&L for Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6, (using 20mm graded stone aggregate) exc 10 cm width and set in CM (1:4) all as specified and as directed by Engr-in-Charge.

Supply only integral water proofing compound complete all as specified.

Taking down cement plaster or terrazzo from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for Rendering/plastering, 15 mm thick in cement mortar (1:4) on brick or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified.

M&L for 15mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for 10mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified.

M&L for Preparation of newly plastered surfaces of walls & applying two coats of OBD on chalk whiting on plastered surfases complete all as specified.

M&L for Preparation of newly plastered surfaces of ceiling & applying three coats coats of white wash complete all as specified.

M&L for Preparation of old decorated surfaces of wall and applying one coat of white lime wash (white washing) on walls including corneces, pillars complete all as specified and directed.

M&L for Preparation of old decorated surface of wall and applying one coat of oil emulsion distemper complete all as specified.

M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified.

M&L for cleaning and preparation of old painted surface of wall apply one coats of weather proof paint camouflage pattern complete all as specified and directed.

M&L for Preparation of old decorated surfaces on ceiling and applying one coat of white lime wash including cornice and pillars etc complete all as specified.

M&L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates,rivetting, etc., n exc 10 kg each brackets, conforming to FE 410-0 or FE 310-0 (Brackets over 10 kg each to be measured under `Structural Steel') complete all as specified and directed.

S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

Removing existing water proofing treatment where so ever exist (except concretepadding) and removing debris/rubbish off the site as directed

Demolition of cement concrete of any description and in any position provided as in roof padding, roof curb etc complete all as specified and as directed. Note: - (a) Demolition should be done carefully to roof slab. (b) Any damage occurred in the roof surfaces during demolition shall be made good by the contractor without extra cost to the department. (c) Disposal of debris/retrieved materials shall be thrown out of site at place as directed.

M&L for providing PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in roof padding laid in slope as per requirement mixed with integral water proofing liquid admixture as per manufacturer's instructions complete all as specified and as directed. Note : (i) Minimum thickness of PCC shall be 50mm. (ii) Integral water proofing liquid admixture shall be measured and paid separately under appropriate item here in after

Supply only Liquid water proofing compound

Material and labour for water proofing treatment with APP based standard membrane over PCC padding in roof with the following courses of treatment for:- (a) Apply bituminous primer (IS 3384) @ 0.40 Kg per sqm of the surface area including cleaning the surfaces complete all as specified. (b) Apply APP plastomeric bitumen based mineral finished water proofing membrane polyester reinforced(3 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified. (c) The entire surface of finished APP membrane shall finally be painted with one coat of Solar reflective bituminous aluminium paint @ 0.1 ltr per Square Meter and other as prescribed by manufacturer ,complete all as specified and as directed by Engr-in-charge

Demolition RCC Roofs, flors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 15cm and n. exc. 22.5 cm long and dia of bolt 11 to 15 mm , complete all as specified.

S & F MS Plate (Plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes with riveted bolted or welded attachment Fe-410-W(Gde-E-250) complete all as specified and directed.

Excavating in post holes (or similer holes) each n. exc. 0.5 Cum. Getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layer not exc.25 cm. hard/dense soil.complete all as specified and directed.

M&L for cement concrete type C-2 1:3:6 using 40mm graded stone aggergate as in foundations filling and mass concrete, complete all as specified and directed.

S&F Steel work in tubular trusses incl. special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS 11614-1979 grade St-240 complete all as specified and directed.

M&L for Pre painted galvalume aluminum zink coating GI based Tile profiled corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Tile Profiled steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws,complete all as specified and directed.

S & F anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm incl hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long ,complete all as specified all as specified

S&F Non asbestos 10mm thick fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping ,complete all as specified and directed.

M&L for chequered cement concrete tiles (reflective type) with mixture of white and grey cement in equal proportion and no pigments of size 30cmx30cmx25 mm thick, set, jointed and pointed in neat cement surry in floors including 20 mm thick screed bed in CM 1:6 for laying floor tiles complete all as specified and diected.

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. as in ordinary rock complete all as specified and directed.

M&L mild steel bars 10 mm dia and over cut to length bent to shape as required including cranking bending spirally for hooping for columns hooking ends cbinding and including mild steel wire not less then 0.9 mm dia or securing with clips complete all as specified and directed.

Ditto as per Srl Item No 57.00 above but 6 mm to 8 mm dia as in stirrups, etc.complete all as specified and directed.

M&L formwork to sides of concrete foundations, footings, bases of columns, and similar work; vertical or to batter complete all as specified and directed.

M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal ,complete all as specified and directed.

M&L for RCC (Design mix) M-30 using 20mm graded stone aggregate in foundations, including, footings, foundation beams and mass concrete as specified and directed.

M&L for RCC (Design mix) M-30 using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts specified and directed.

S&F Mild steel bolts (dia of neck exc. 16 & n.exc 20 mm and length exc 30cm long) purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut fixed completed all as specified and directed.

S&F Mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete (Fe-410W Gde-E 250 quality-A) all as specified and directed.

S&F 16 to 20 mm dia mild steel screw bolts (machine made) with square or hexagonal or MS Plate heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut, length of bolt exc. 5 cm but n.exc 10cm long fixed complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F Mild steel rolled sections as in framing for cladding, glazing, valley gutters and similar works and the like fixed with angle cleats and connecting plates, etc (Fe-410W Gde-E 250 quality-A) including distance pieces, cleats etc complete all as specified and directed.

S&F 0.80mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with MS flats or ms angles etc including making holes and fixing drain pipe where required complete all as specified and directed.

S&F 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed wiith clamp to walls/roof truss/valley gutters, beams, etc complete all as specified and directed

S&F 110 mm dia bore PVC (SWR) bends complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as specified and directed

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified.

M&L 40mm thick PCC type B-1, 1:2:4 (using 20mm gradedstone aggregate) as in sub-floors, sub-bases, floors and pavings, etc. as specified and directed

S & F 12 mm dia Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc 15cm but n. exc. 30cm long complete all as specified.

S&F Mild steel screw bolts dia of neck 5 to 10mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 5cm but n exc 10cm long.

S&F for fire proof aluminum composite panel 30 mm thick complete all as per manufecturer instruction as direct complete all as specified.

S& F Flat angle Tie bars with screwed ends, nuts, washers and mild steel paltes for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe- 290 Gde- 165 complete all as specified and directed.

S & F mild steel plain sheets 1.60mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required ,complete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over n. exc.10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and making good disturbed surfaces of walls, floors etc to match with existing surfaces of colour shade complete all as specified and directed.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, unsheathed, multistranded, flexible,copper conductor cable 1.5 sqmm,1100 volts grade drawn through and including PVC casing and caping/conduit of size 25 mm or above as required at site with all accessories such as Tee,corner, overlaping connector etc.on surface walls, roofs and ceilings etc. including concealed MS box factory made of suitable size fabricated out of 1.6mm thick MS sheet/modular plate and frame suitable for fixing and including bakelite hylam sheet 3 mm thick fixed flush with wall surface by means of stainless steel cadmium plated screws and cup washers suitable for mounting switches, sockets, fan regulators etc.and including 1.5 Sqmm PVC insulated, multistranded, unsheathed(Green colour),FRLS type single core, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for One light point / fan point controlled by one switch.

All as per Srl Item No 84.00 above, but for One 3 pin 6 amps socket out let point controlled by one 6 amps switch on independent board .

All as per Srl Item No 84.00 above, but for One 3 pin 6 amps socket out let point controlled by one 6 amps switch on independent board .

All as per Srl Item No 84.00 above, but for One 3 pin 6 amps socket point controlled by one 6 amps switch on same board .

All as per Srl Item No 84.00 above, but with 2.5 sqmm for One 3 pin 16 amps socket outlet point controlled by one 16 amps switch on independent board.

Supply & fix modular switch 6 Amps, one way, one module complete all as specified and directed.

Supply & fix modular switch 16 Amps,one way, one module complete all as specified and directed.

Supply & fix modular socket 6 Amps, 2/3 Pin combined, two module complete all as specified and directed.

Supply & fix modular socket 6 A/16 Amps, 6 Pin combined, two module complete all as specified and directed.

Supply & fix modular fan step regulator,120W two module complete all as specified and directed.

Supply & fix ceiling rose, 3 terminal, PVC/polycarbonate body complete all as specified and directed.

Supply & fix in repair LED lights 1x20 watt ,220 V, AC decorative box type with driver , holder including LED tube light connecteing up with three core flexible copper conductor cable of suitable size from ceiling rose including connector block etc.and necessary fixing arrangement at any height ,complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size ,complete all as specified and directed.

Supply only LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp ,complete all as specified and directed.

S & F Metal halide search light fittings of any wattage manual rotating complete with tripod mounted wheels and including holders fitting prewired , including fixing of LED flood light , complete all as specified and directed. (Note:- flood light used against this item shall be be measured in Srl Item No 97.00 above of Sch'A' as Supply only ).

Supply and fixing in repair, LED flood light 170 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified.

Supply and fix in repairs MCB distribution board SPN 12 way 240 volts, double door with IP 42 protection duly painted with epoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoings complete with 200 Amps rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate ,complete all as specified and as directed.

Supply and fix MCB distribution board SPN 8 way 240 volts, double door with IP 42 protection duly painted with epoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoings complete with 200 Amps rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate including removing old unserviceable item complete and making good the disturbed surfaces to match with existing all as specified and directed.

Supply and fix in repair MCB SP 6 to 32 Amps,10 KA, "C" series, 240 volts complete all as specified and directed.

Supply & fix in repair MCB SPN 32/40 Amps 10 KA, "C" series, 240 volts complete all as specified and directed.

M&L for Earthing IN REPAIR, complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & RCC cover all as specified & shown in elect plate No. 3 of SSR part I of 2010 including testing on completion ,complete all as specified.

Supply,lay and testing in replacement LT cable XLPE insulated,armoured heavy duty electric cable,1100 volts grade with multistranded aluminium conductor of cross-sectional area 10 sqmm; 2 core laid in trenches/pipes/ducts/walls and connection with necessary cable lugs and glands, nuts, bolts and washers etc ,complete all as specified and directed.

Ditto as per Srl Item No 105.00 above but of cross-sectional area 16 sqmm; 2 core

S&F energy efficient square surface/ceiling mounted LED down 2x2 luminaire 34/36 watt white powder coated CRCA housing with LED seamless front frame with flat white high transmission acrylic cover complete all as specified and as directed by the Engr- in- Charge.

S&F in repair, GI pipe 50mm dia light grade in any length with all GI fittings such as socket, elbow, bend, union, Tee etc laid in trenches/duct/culvert/road crossing etc for protection of cables, complete all as specified and directed.

Supply,install, testing and commisioning of split type air conditioner 1.5 TR capacity of minimum 3 star rating with standard accessories alonwith cordless remote control, single phase, 240 volts complete with all accessories such as indoor and outdoor units and refrigerant tubing of adequate length as required at site, indoor mounting plate, drain pipe of suitable size brought to ground level from any height including making cable connection by providing three core 2.5 sqmm copper conductor cable PVC insulated, sheathed of adequate length as required at site and initial filling of refrigerant gas including making round hole on existing any type of wall (core cutting if required) for taking up refrigerant tubing, drain pipe and cables etc and making good the disturbed surface by matching with existing adjoining surfaces complete all as specified and directed . Make:- Daikin / Blue Star / Voltas

Material and labour for sub main wiring complete with 2 run of 4 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 4 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable item , complete all as specified and as directed by Engr-in-charge.

Supply and fix in replacement of sheet metal enclosures with two pin and earth plug and socket complete with single pole MCB 20 Amps complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation,single phase naturally air cooled indoor type & designed for input variation between 170 volts to 250 volts with out voltage stabilized at 20 volts with accuracy of± 2.5% and of capacity 4 KVA , complete all as specified and as directed by Engr-in-charge.

Taking down fan, sealing cable end and removing fan and refixing the fan after changing of anti sucidal fan rod complete all as specified and directed.

S & F anti sucidal fan rod complete with adequate length as per site requirement all as specified and directed.

S&F exhaust fan ,steel body AC single phase 230V of size 300mm sweep with blades, frame and louvers, complete all as specified and as directed by Engr-in-charge.

S&F switch piano,flush type,single pole,1 way,6 Amps , complete all as specified and as directed by Engr-in-charge.

MAHESH ENTERPRISES (BID ID -3232030)

PICON ENTERPRISES (BID ID -3232326)

M/s Qureshi Construction Co (BID ID -3229956)

Anjali Constructions (BID ID -3237737)