Repair/maint of perimeter lights, high mast lights, security lights and misc E/M works at Tech area under GE (AF) Tughlakabad

Amount

S&F in replacement of PVC insulated multi stranded, multi core copper conductor wire of size 2.5 Sqmm, 3 core, 1100 Volts from looping box to street light/panel wiring circuits all as per site requirements complete all as specified and directed by Engr-in-charge.

S&F PVC insulated and sheathed circular flexible copper conductor 1100 volts, of size 6 Sqmm 4 core from looping box to street light/panel wiring circuits all as per site requirements complete all as specified and directed by Engr-in-charge.

Dismantling of the old existing looping box duly disconnecting the incoming/outgoing cables & removing from site and supply, installation and testing of non transparent SMC Kiosk box of 3 phase with 4 Nos bus bar of 63 Amps aluminium 4 wire and 1 No Kit kat fuse of 10 Amps factory made out of 14 gauge steel sheet with locking arrangement in front side of size 300x200x100 mm complete all as specified and directed by Engr-in- charge. Make: Cat Part No GSJB-3020 of Sintex/Cat Part No 689612 of Legrand

S&F GI pipe of size 50 mm dia light grade for housing/protection to the LT cables of required lengths complete all as specified & directed by Engr-in-Charge.

M&L for Painting to LT steel tubular poles of 9 mtr long along with cross arms, clamps, channels, bracings etc complete with machine spray after cleaning and preparation the surfaces, externally with two coats of aluminium paint duly marking 30 cm width circular bands of 3 Nos alternatively 1 metre height from ground level with blue paint making back ground and writing numbering of poles complete all as specified and as directed by Engr-in-charge

S&F in replacement of LED street light fitting of capacity 25 watt, cool white, complete with drivers and all accessories & making all necessary connection complete all as specified and as directed by Engr-in-charge . Make: Cat No LTESSI25WLED of C&S/ Cat No ENDURA PEARLSL25WLED757SASYTOPC of Havells/ Cat No BCLST25WLEDI of Bajaj

S&F street light bracket made out of light grade GI Pipe of 40 mm nominal bore of 1.2 metre long tilted to 30 degree angle on 0.4 metre length along with flat iron clamp of 40 x 4 mm size 750 mm long duly drilled made to shape the bracket complete with nut bolt and washers including applying 2 coats of aluminium paint over a coat of red oxide primer with machine spray complete all as specified and as directed by Engr-in-charge

S&F in replacement of LED street light fitting of capacity 60 watt, cool white, complete with drivers and all accessories & making all necessary connections complete all as specified and as directed by Engr-in-charge . Make- Cat No LTESSI60WLED of C&S/ Cat No ENDURAPEARLNEO60WLED of Havells/ Cat No BRTFG60WLEDI of Bajaj

S&F in replacement of LED street light fitting of capacity 30 watt, cool white, complete with drivers and all accessories & making all necessary connections complete all as specified and as directed by Engr-in-charge . Make- Cat No LTESSI30WLED of C&S/ Cat No ENDURA PEARLSL30WLED757SASYTOPCMP of Havells/ Cat No BCLST30WLED of Bajaj

S&F in replacement of LED Flood light fitting of capacity 150Watt energy saving environmental friendly, long life, exclusive innovative die-cast aluminium flood light with high power LEDs as light source complete all as specified and directed by Engr-in-charge. Make- Cat part no. LTESS150WHPLED/LS of C&S/ Cat No JETAIRISFLS150WLED757PSYMLTG of Havells/ Cat No BJFL150WLED of Bajaj

S&F integral post top lantern made out of die cast aluminium housing with decorative clear opal acrylic diffuser and IP 65 protection capacity 1 x 35 Watts complete all as specified and directed by Engr-in-charge. Make: Cat No HLPT-04-30-CW of Halonix/Cat No CORALPT35WLED757PSYMTOPC of Havells/ Cat No PCGLPT0140C of Polycab

Disconnecting/unscrewing of all electrical connections of the unserviceable flood light fitting from a height upto 12 mtr and S&F, commissioning & testing the high bay light of 90 Watt capacity suitable for 240 volts, 50 HZs single phase power supply, fabricated with die cast aluminium with high power LED as light source, IP 65 complete with all accessories all as directed by Engr-in-charge. Make: Cat No ENDURAHIBRITEPLUSHBP90WLED765S 90DTOLENS of Havells/ Cat No HLBL-ML09-CWL of Halonix/Cat No LTEHB90WHPLED/LS of C&S

S&F, commissioning & testing in replacement of LED street light fitting of capacity 45 watt, cool white, complete with drivers, all accessories & making all necessary connections complete all as specified and directed by Engr-in-charge. Make- Cat No ENDURAPEARLNEOSL45WLED757SASY TOPC of Havells/ Cat part No. LTESSI45WLED of C&S/ Cat No BTFG45WLEDI of Bajaj

Taking out unserviceable burnt LT cable of any size from the trenches in any depth complete all as specified and directed by Engr-in-charge. Note: Necessary earth work if any required shall be measured and paid separately.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre depth and not exceeding 1.5 metre wide for laying of pipes/cables etc and getting out all as specified and directed by engineer in charge.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed by engineer in charge.

M&L for Removing excavated material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by the Engineer-In-Charge

M&L for sand cushioning (dry sand) to underground cable for cable protection laid in trenches complete all as specified and as directed by Engr-in-charge. Note: Punned thickness shall be measured for payment purpose

Supply and Lay of subclass 'B' well burnt bricks laid dry flat in trenches for protection of cable over cable complete all as specified and as directed by the Engineer-In-Charge

Supply, lay or fixing or passing through pipes of XLPE (FRLS) cable of aluminium conductor with heavy duty stranded, 1100 Volts of XLPE insulated PVC sheathing (heavy duty) armoured cable for working pressure up to and including 1100 volts to IS -7098 all as mentioned in SSR (Part-I) complete all as specified and as directed by the Engineer-In-Charge of following sizes:-

50 Sqmm x 3.5 core

25 Sqmm X 3.5 core

35 Sqmm X 3.5 core

S&F, commissioning and testing in replacement of LED street light fitting of capacity 72 Watt made of pressure die casting aluminium housing with high power lens and toughened glass IP66 complete all as specified and as directed by the Engineer-In-Charge. Make: Cat No ENDURACITYLINEARNEOSL70WLED757 PASYBOTG of Havells/Cat No HLSLD-ML04-72WWL of Halonix/Cat No PCGLSC272 of Polycab

M&L for repairing the broken coping of pole foundations with PCC 1:2:4 type B1 by using 20 mm graded aggregate as pole base upto the height of 50 cm from the ground level of 600mm dia including necessary form work and painting with oil bound distemper over a coat of primer and finishing the surfaces fair and even complete all as specified and as directed by Engr-in-charge.

S&F of MCCB four pole, 415V, fixed thermal and magnetic setting of capacity 63Amp, breaking capacity 10 KA complete suitable for fixing inside the LT Panel/feeder pillar box in replacement of existing unserviceable MCCB complete all as specified and directed by Engr-in-charge. Make: Cat No IHLGSF0063 of Havells/Cat No EM9081400JO of L&T or equivalent in Hager as approved.

S&F MCCB 4 Pole 415 V, Adjustable type 250 Amps with breaking capacity 36 KA suitable for fixing in inside LT Panel/ feeder pillar box in replacement of the existing unserviceable MCCB complete all as specified and directed by Engr-in-charge. Make: Cat No IHLFNF0250 of Havells/Cat No CM986500PO of L&T or equivalent in Hager as approved.

S&F MCCB 4 Pole 415 V, Adjustable type 160 Amps with breaking capacity 36 KA suitable for fixing in inside LT Panel /feeder pillar box in replacement of the existing unserviceable MCCB complete all as specified and directed by Engr-in-charge. Make: Cat No IHLFNF0160 of Havells/Cat No CM9806500NO of L&T or equivalent in Hager as approved.

S&F MCCB 4 Pole 415 V, Adjustable type 125 Amps with breaking capacity 25 KA suitable for fixing in inside LT Panel /feeder pillar box in replacement of the existing unserviceable MCCB complete all as specified and directed by Engr-in-charge. Make: Cat No IHLFNF0125 of Havells/Cat No EM9098400LO of L&T or equivalent in Hager as approved.

Note: The amount of Rs 28,205.00 against schedule of credit given on Tender Sl Page No 29(R) shall be deducted from the total amount quoted by the contractor against BOQ while deriving the contract sum for acceptance.

Sumit Enterprises