SPECIAL REPAIRS TO ROADS AND CONNECTED OTHER WORKS UNDER GE (NORTH) BANGALORE

Amount

Repair to pot holes not exceeding 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25mm in depth, making good by applying a tack coat of bitumen emulsion (RS-1, grade confirming to IS :8887 at 3.00 kgs/10Sqm), putting in premixed bituminous macadam, well rammed and sealed with binder 9.8kg per 10 Sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (Including supply of premixed macadam, binder and chippings), depth of potholes not exceeding 30mm complete all as directed.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as directed

Material and Labour for applying tack coat with bitumen emulsion (RS-1, grade confirming to IS :8887 at 3.00 kgs/10Sqm) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503 of MORTH complete all as directed

Scarifying or picking graveled, macadam or bituminous macadam surfaces in area not exceeding 400 sqm and depth exceeding 50mm and not exceeding 100 mm etc complete all as directed.

Providing and laying dense bituminous macadam with minimum 40-60 TPH batch type HMP using crushed stone aggregate of specified grading II (26.50mm nominal size) premixed with bituminous binder VG-30 @ 4.50% by weight of total mix and cement as a filler, transporting the hot mix to work site, laying, rolling to achieve and desired compaction as per MORTH specification clause No. 505 complete in all aspects and as directed.

M&L for Bituminious premix semi dense asphaltic concrete, 30mm consolidated thickness with 5.5% binder content (Paving bitumen of VG-30) by weight of total mix, mixed in hot mix plant, rolled with tandem vibratory roller and compacted to required camber and gradient by using mechanical paver all as specified and as directed.

Material and Labour for preparation of new or previously treated surfaces to receive thermostatic paint laying of road marking with hot applied Thermoplastic compound with Reflectorizing glass beads on Bituminous surface, 2.5mm thick including reflectorizing glass beads @ 250 gms per sqm area is exclusive of surface applied glass beads as per IRC:35-1997. The finished surface to be level, uniform and free from steaks and holes all as specified and as directed.

Supply and fixing in repair 100% water proof solar road delineator pole mounted (Pole size 48mmX1000mm duly powder coated) fixed in repairs fixing the same in M 15 grade (type-I) block of size 20x20x30cm(deep) complete all as directed. Make:- DA-112 of Dark eye or equivalent of Sun Eyez/ M/S Texla Plastic & Metal Pvt Ltd./M/s Automat Road Safety Pvt Ltd/3M

Supply and fixing in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Monocrystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc all as specified and directed. Make:-Dark eye or equivalent of Sun Eyez/ M/S Texla Plastic & Metal Pvt Ltd./M/s Automat Road Safety Pvt Ltd/3M

Demolition and breaking up 600mm dia reinforced concrete drain pipe with bed concrete set in cement mortar including removing debris out side MD land complete all as directed

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as directed

Reinforced concrete pipes, class NP2 bore of pipe 600 mm dia with one collar per length of pipe complete all as directed

M&L plain Cement concrete 1:3:6 type C2 using 40 mm graded aggregate, as in foundations, filling and mass concrete complete all as directed

MANJUNATHA CONSTRUCTIONS

Sri Lakshmi Constructions