SPL REPAIR TO BLDG NO P-823, P-825, P-834 AND SPL REPAIR/ REPLACEMENT OF PIPE LINE AT ITARANA CANTT ALWAR

Amount

Taking down cement or cement lime plaster, of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as directed by Engr-in-Charge and as specified.

Demolition cement concrete (unreinforcement) in ground floor and paving n exc 15 cm thickness (below or above ground level) & removal complete all rubbish materials as directed by Engr-in-Charge and all as specified.

Demolition cement concrete (unreinforcement) in ground floor and paving exc 15 cm thickness (below or above ground level) & removal complete all rubbish materials as directed by Engr-in-Charge and all as specified.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars & precast concrete masonry etc complete all as specified & directed.

M&L brick work with fly ash 'brick straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and as directed

M&L 15 mm thick rendering fair faces of brick masonary in cement mortar 1:4 mixed with integral water proofing compound finished with even and smooth complete all as specified and directed. (Note : WPC shall be measured and paid separately under relevant item of this Schedule).

Supply only Integral water proofing compound in plaster complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:6 on other then fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified & directed.

M&L preparation of newly plasterd surface of wall and applying two coats cement base paint over a coat of primer complete all as specified and directed.

M&L for preparing newly plastered surfaces & applying three coats of white wash on wall.

M&L for preparation of old surfaces of wall and applying two coats of white wash on wall.

M&L for preparation of previously treated surfaces/old surface of wall and applying one coat cement base paint on old surface of wall.

M&L preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified & directed.

Dismantling structural steel work including doors, gates including framed truss etc complete all as specified & directed.

Roof trusses (framed),made of structral steel Fe 410 -W (GdeE- 250) quality-A squre/round hollow section trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified & directed.

S&F plates (Plain or chequered ) Chanels square cut or notched made of Fe 410 -W (GdeE- 250) quality A (ordinary and counter sunk) forming holes, without any attachment

S&F for preparation of new steel surfacof any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of Red oxide primer complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated ready made ridge suitable for roof sheets 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with coach screws as specified & directed.

M&L Hardcore of gauge (broken bricks) n exc 63mm deposited spread levelled in layers n exc 15 cm thick watered and rammed to a true surface with gauze broken boulder exc 90 cm etc complete all as specified & directed.

PCC (1:4:8) type D-2, using 40 mm graded stone aggregate in foundation mass concrete.or sub base complete all as specified and directed.

M&L 100mm thick PCC (1:2:4) type B1 laid in alternate panels not exc 3m x 3m, finished even and fair, broom finished 10mm wide joint shall be left between panels. The joint shall be filed with Bitumen mastic comprised 1 : bitumen :3 sand mixture complete all as specified and directed.

S&F mild steel work as in wind ties for including securing bolts,incliding nessary drilling, bolting or riveting etc. and similar work confirming to Fe-410 or Fe-310 all as specified and directed.

M&L TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per ser item No 25.00 above but 5mm to 10mm dia as in stirrups, spacers binders etc complete all as specified & directed.

M&L reinforced cement concrete type B1 1:2:4 using 20mm graded stone aggregate in for lintel bend, roof bend, gable bend etc including necessary form work complete all as specified and directed.

M&L cement concrete 1:2:4 type B1 filing in gap between CGI Sheet and Brick wall Junction point from inner/outer side at roof level equal to width of wall complete all as directed by Engr-in-Charge

Taking down carefully copper/aluminium point wiring for one light/fan/socket/light fitting/power point and taking down of teak wood batten/ PVC casing caping/PVC conduit/steel conduit and making good disturbed surfaces of walls/ ceiling/ floors etc including dismentling of fittings complete all as specified.

M&L point wiring complete with 1.5 Sqmm single core multistranded copper conductor fire resistant low smoke & heat (FRLS) PVC insulated and unsheathed cable 1100 Volts grade confirming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20mm external dia) but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part-I, ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling including 1.5 mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakellite white/coloured top sheet cover 3.0 mm thick for one light point controlled by one way switch all as specified & directed. Note : The quoted rate shall be incuded cutting, chasing, making good of distrub surfaces including matching of existing colour surface of walls.

All as per serial item No 30.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

All as per serial item No 30.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

S&F switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts complete all as specified and directed.

S&F socket outlet for 3 pin (with 2 pin outlet also), 5/6 Amp, flush type 240 Volt complete all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50mm two or three terminals complete all as specified and directed.

S&F decorative ultra slim liner LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube of model E-LITE LED Pride Plus and connecting up with and including three core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed. Make :- Havells Cat Part No LHEXBHP71N1W018 or equivalent of Philips/ Crompton Greaves /Bajaj/Wipro.

S&F LED type street DRACO SERIES light luminaire 20 Watt, 230 Volts, 50 Hz including all necessary fitting accessories and LED complete all as directed. Make : C&S Cat Part LTESS20WLED or equivalent of Crompton Greaves/Wipro

S&F sheet metal enclosures, double door type, suitable for fixing MCB SPN with 200 Amps rated bus bar, 8 way, 240 volts complete all as specified and directed.

S&F MCB 32/40 Amps, single pole & neutral, 240 Volts complete all as specified and directed.

S&F MCB 6-40 Amps, single pole, 240 Volts 'C' curve, 10KA ISI marked as per IS/IEC 60898-1 2002 complete all as specified and directed.

S&F 2nd class hard wood rectangular block open recessed of size 30 x 25 x 5cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug(4 Nos) for DB etc complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 25 sqmm 4 core laid in trenches, along poles through pipes etc with and including taking down old unserviceable XLPE cable complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.

Excavation in trenches n.exc. 1.5 M wide and n.exc. 1.5 M in depth for foundation or for shafts, walls, manholes, laying of cables, pipes etc not exc 10 Sqm on plan and getting out in soft/loose soil all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/loose soil complete all as specified.

M&L brick work with fly ash bricks {As per IS-13757 (1993) burnt clay fly ash building bricks}, (Old size bricks) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection complete all as specified & directed.

M&L dry sand and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

Removing excavated soil/material to a distance n. exc 50 M and depositing where directed at a livel n. exc 1.5M above the starting point at the descriation of contractor complete all as specified.

S&F sub main wiring on and including passing thorugh PVC conduit pipe 1100 Volts grade with PVC flexible cable copper conductor unsheathed multistranded multistraanded single core of size 6 sqmm and continuous wath with PVC flexble cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 697/1990 including taking dwn existing U/S sub main wiring (Note: Two runs of cable with one run of earth wire and one run of PVC Coundit should measured as one length)

M&L for earthing complete with galvanized steel earth plate 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised iron earth wire 4mm dia as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanized iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point of galvanized Iron/steel of size 75 x 75 x 25 mm, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B-1 chamber and MS angle iron frame 40 x 40 x 3 mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, GI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate No. 3 of SSR Part I of 2009 and connected to earth test point including testing complete all as specified & directed.

M/L for GI pipe (Light grade) for protection of LT cable fixed to walls/road crossing including clamps complete of 40 mm bore

Taking down old CI/DI water tubing and connections of 100 mm bore with all fittings such as Elbow,bend,tee,union etc., laid in trenches etc. all as directed. Note :- (I) Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule. (II) Before quoting the tender , contractor must see the feasiblity of site and see the location of site and must be ensure that no sewage line and cable will be damaged.If damage will be occured same shall be rectified without payment.

Supply,laying,jointing and testing Ductile iron (DI) pipe 100 mm bore with spigot and socket ends,conforming to IS :8329/2000 classification,medium grade ( K7 class ) suitable for push-on- joint (Rubber gasket -D-Jointing) with cement mortar lining inside the pipes and outside zinc coating with bituminious finish coat as per IA 8329/2000 including EPDM rubber joint ,laid in trenches including making good the disturbance surface complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Boring of holes under road,pavement, hard standing by trench less technology using ultra sound technique and necessary machine including HDPE pipe of 250mm dia suitable for 0.4 mpa working pressure.

Supply & fixing sluice valve ISI marked PN 1.6 ,complete with both ends for iron pipe including necessary earth work and also taking up or down unserviceable valve of following size:- Make:- Kartar, kirloskar ,zoloto

(a) 100 mm size

(b) 80 mm size

M&L for construction of brick masonry valve pit of size 1350mm x 1000mm x 1200mm (internal dimension) (Type'E') all as Specified and as shown on drawing no. TD/2004/26 Sheet No 1/3 to 3/3 including excavation and earth work in any type of soil, PCC in foundation, coping, plastering,fabrication of valve pit chamber cover made out of angle iron frame and MS plates of thickness 3 mm with locking arrangement, 50mm dia lock with 03 keys, including of openable arrangement by heavy duty MS Hings of suitable size painted with synthetic enamelled paint (Blue colour) over a coat of primer including grouting of frame in PCC or brick work with plaster and final touch with double layer of white wash complete all as specified and directed.

M&L PCC 1:2:4 type B2 using for drain wall make good the damage surface & floor road etc complete all as specified & directed.

S&F ductile iron fitting ,specials (K7) such as bends ,tapers,collars,reducers,tee piecs (single or double branch) any type,angle/radius and straight connecting pieces etc ( ISI marked ) conforming to IS 9523 for flanged/socket and spigot ends suitable for DI pipe 100 mm bore complete all as specified directed. NOTE :-Run lead /tyton joints shall be measured & paid for sepaately under relevent itemss of this schedule

M/S GAURI CONSTRUCTION

AARSINFRATECH

M/s ASK Enterprises

KARTIK ENTERPRISES

GAR CONSTRUCTIONS