SPECIAL REPAIRS TO BLDG NO.SML-1 AT FORT AREA NAGPUR UNDER GE KAMPTEE

Amount

Dismantling timber scantlings in frame work 40 sq. cm and over in section, in any position unframed work, complete all as specified and directed.

Dismantling timber fillet under 40 sqcm in section, in any position, complete all as specified and directed.

Supply and fix Rolled section as in main and cross beam ,hip and jack rafters, purlin and similar work confirming to FE 410 Gde-E-250 , complete all as specified and directed. Note: Contractor will arrange all scaffolding and safety measure.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar, complete all as specified and directed.

Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for removal of rubbish/debris MD land, complete all as specified and directed.

Material and labour for Rubber pressed glosy finished, cement chequred tiles 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry and pointed in coloured pigment over 20mm cement screed bed in cement mortar 1:4, complete all as specified and directed.

Material and labour 75mm thick cement concrete type D-2 , 1:4:8 (using 40 mm graded stone aggregate) in subbase, complete all as specified and directed.

Dismantling floor, heart or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular ), area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile, over and including 15mm thick screed bed of cement mortar (1:4) etc, complete all as specified and directed.

Material and labour colored glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in site or color cement to match including rendering 10mm thick in cement mortar 1:3, complete all as specified and directed.

Taking down existing water proofing treatment including screed bed and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water, complete all as specified and directed.

Material and labour for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.50 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil/water based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick screed bed in CM 1:3 and aluminium paint 200gm/sqm over membrane, complete all as specified and directed.

Cutting holes in stone walls built in cement mortar for inserting of hals fasts and similar work and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 Exc half brick but not. Exc. One brick, complete all as specified and directed.

Dismantling of asbestos cement sheet (corrugated , semi-corrugated etc) sheets in roof coverings, complete all as specified and directed.

Taking down eaves gutters (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Supply and fix Mild steel sheet eaves gutters 1.25mm thick 150mm dia, galvanised class 3, half round with rounded edges etc,including MS clamp as requried at site and two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Dismantling of PVC pipes (110mm/75mm bore), jointed in cement mortar and taking out of trenches/from walls including fittings as bands, branch pieces, traps etc, complete all as specified and directed.

Supply and fix PVC (SWR) bends any radius of 110 mm bore, complete all as specified and directed.

Supply and fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore, complete all as specified and directed.

Taking down chowkat with shutter (Without taking of shutter from frame) area exc 1.50 Sqm but nexc 4.00 Sqm each, complete all as specified and directed.

Taking down chowkat with shutter (Without taking of shutter from frame) area n exc 1.50 Sqm each, complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as specified and drawing, complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tube for top & bottom rails M.S. frame shall be covered with heat moulded wood plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and both side prelam PVC sheet as for top rail lock rail & bottom rail on either side, complete all as specified and directed.

Taking down cement plaster of any description including racking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed.

Material and labour for 10mm thick rendering on fair faces of brick work or concrete surface in cement plaster (1:6) finished the surface fair, complete all as specified and directed.

Material and labour for 5mm thick rendering on fair faces of brick work or concrete surface in cement plaster (1:3) finished the surface fair complete in ceiling, complete all as specified and directed.

Material and labour for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of primer, including 3mm thick wall care putty on wall, complete all as specified and directed.

Material and labour for ceiling surfaces of any description and applying three coat of white wash on new decorated surfaces of ceiling, complete all as specified and directed.

Material and labour for ceiling surfaces of any description and applying two coat of white wash onold ceiling surface , complete all as specified and directed.

Supply and fix GI water tubing medium grade 15mm bore galvanized with all fitting Supply and fixixture complete to walls and ceilings or laid in floors Taking up or down steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Supply and fix GI water tubing medium grade 20mm bore galvanized with all fitting Supply and fixixture complete to walls and ceilings or laid in floors Taking up or down steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Supply and fix in repairs 15 mm bore chromium plated bib taps, cast copper alloy, Fancy type, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fix in repair brass CP fancy type 15mm bore pillar tap, complete all as specified and directed.

Supply and fix in repairs 15mm dia brass C.P fancy Type stop valves/Angle cock, complete all as specified and directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed.

Supply and fix in Repairs 32mm Waste fittings, brass, chromium plated for glazed are sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

Supply and fix in repair brass chromium plated shower rose 125mm size, complete all as specified and directed.

Supply and fix in repairs vitreous china squatting pan Orissa pattern 580 X 440 mm long with integral foot rest , S or P trap including connection to trap and to flushing pipe etc , complete all as specified and directed.

Supply and fix in repairs 10 ltr cap PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc, complete all as specified and directed.

Supply and fix in repairs Rotational moulded polyethylene water storage tanks (triple layer cylindrical vertical with closed top)of 1000 litres capacity hoisted and fixed in position and including dismantling water tank and removing from site, complete all as specified and directed.

Supply and fix 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium . rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15nun-142gms/ 20mm-210gms./ 25nun-455gms/40nun - 690 gms, complete all as specified and directed.

Taking down shutters of any description n. exc 1.00 Sqm, complete all as specified and directed.

Supply and fix 2nd class hard wood plain solid straight chowkat Supply and fix frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints, complete all as specified and directed.

M &L for PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in block for hold fast block or similar work and finished the surface with existing and including form work, complete all as specified and directed.

Supply and fix 45 mm thick IInd class hard wood Framed, ledged braced and battened shutters, supplied and fitted to chowkats, complete all as specified and directed.

Supply and fix Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staple, complete all as specified and directed.

S& F II nd class HW , 30 mm thick window glazed/ gauged shutter complete , complete all as specified and directed.

Supply and fix for 150 mm aluminium handles cast type anodised , complete all as specified and directed.

Supply and fix mild steel medium weight cold rolled 100 mm size butt hinges, complete all as specified and directed.

Supply and fix 250mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

Supply and fix 150 mm long aluminium anodised, barrel tower bolt of extruded section , complete all as specified and directed.

Hacking out old broken glass and Supply and fix 3 mm thick sheet glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty in square etc, complete all as specified and directed.

Supply only 3 mm thick sheet glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty in square etc, complete all as specified and directed.

Preparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Preparation of newly wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of primer, complete all as specified and directed.

Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth & applying one coat of synthetic enamel paint, complete all as specified and directed.

Material and labour for preparation of old wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Material and labour for complete removal of existing treatment of wall and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.

Material and labour for complete removal of existing treatment of wall and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

Removing building material etc to a distance upto 5 KM beyond the lead included in the rates,including loading,unloading and stacking at the destination complete all as specified and directed

Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper-ring to match with existing wall/floor/ceiling finishes, complete all as specified and directed.

Taking down sheet metal enclosure,DB & MCBs main switch etc and making good disturbed surfaces to match with existing surfaces, complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces, complete all as specified and directed.

Material and labour point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed / surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specified and directed. PVC Conduit Make : Polycab, Modiplast, Superplast Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

Ditto all as per item No. 66 above but One ceiling/exhaust fan point controlled by oneway switch and regulator, complete all as specified and directed.

Ditto all as per item No. 66 above but One 3 pin 5 amp socket outlet point on the same board with other switches, complete all as specified and directed.

Ditto all as per item No. 66 above but One 3 pin 5 amps socket out let point on independent board, complete all as specified and directed.

Ditto all as per item No. 66 above but One bell/buzzer point controlled by one bell push, complete all as specified and directed.

Ditto all as per item No. 66 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point, complete all as specified and directed.

Material and labour for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade surface/ concealed in wall of the following sizes :- 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm, complete all as specified and directed. PVC Conduit Make : Polycab Supperplast, Finolex Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same.

Supply and fix for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make: Anchor Roma/ legrand/ Crabtree.

Supply and fix for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switchboxes, complete all as specified and directed. Make: Anchor Roma/ legrand/ Crabtree.

Supply and fix for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make: Anchor Roma/ legrand/ Crabtree.

Supply and fix for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make: Anchor Roma/ legrand/ Crabtree.

Supply and fix ceiling rose surface type three terminals 5 amps, complete all as specified and directed.

Supply and fix Electric Bell Ding dong AC 230 volts, single phase, complete all as specified and directed.

Supply and fix bell push switch modular type single pole one way 5 amp 240 volts, complete all as specified and directed. Make: Anchor Roma/ legrand/ Crabtree.

Supply and fix 0-4 step -2 module modular type electronic regulators for ceiling fan 1200/1400 mm sweep, 240 volts, 120 watts single poles, complete all as specified and directed. Make: Anchor Roma/ legrand/ Crabtree.

Supply and fix 18/20 Watt LED Tube light fittings complete with aluminium body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 2 core 1 sqmm copper conductor cable s, complete all as specified and directed. Make :- Philips Astra Line 20W/ CG -LCTL-18/20W-CDL /Bajaj BCLSB 18 W.

Supply and fix in repairs LED baton fitting 2' length including drivers having energy consumption, 9-11W ,230 V ,50Hz, 6500K, not less than 800 lumen prewired, complete s, complete all as specified and directed. Make & Model : Philips Slim line 9W, CG- LCTL-9/10WCDL, Surya SLE BT 10/Bajaj BCLSB 10 W.

Supply and fix building security light LED 20/ 25 W with Lumen O/P 2000 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 20 mm dia light grade pipe 1.2 m bent two shape including FI clamps nut bolts etc , complete all as specified and directed. Make: Philips BRP020, Luker LST24 WH,/ CG-LSTS-30-CDL /. Bajaj BCLST 30 W LED

Disconnect and insulate electric supply wire and taking down carefully ceiling / exhaust / cabin / wall fans of any make and sweep dismantling blades, check for repairs required, complete all as specified and directed. Note : Repairs/ Replacement of spares shall be carried out under appropriate items.

Hanging only ceiling fans of any make and sweep after repair / overhauling connecting the complete with & including provision of copper conductor cord 3 core PVC insulated and sheathed from ceiling rose to fan connector and testing Making of MES No , complete all as specified and directed. Note:- The fan shall be fitted with new set of clamps rubber shackle split pins and top and bottom nut bolts etc.

Opening up of fan motor of ceiling/Exhaust/ wall/cabin fans cleaning stator rotor, cleaning of all parts greasing oiling of bush and bearing reassembling and testing for smooth functioning , complete all as specified and directed.

Material and labour for taking down burnt/damaged winding cleaning stator and rotor including, slots etc rewinding with suitable guage of enamelled copper winding wire and replacement of rotor shaft, for ceiling fan 1200mm sweep , complete all as specified and directed.

Supply and fix bearing in repairs or replacement for bearing 6201 , complete all as specified and directed.

Ditto all as per Item No. 88 above but bearing 6202, complete all as specified and directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting, double door , complete all as specified and directed. Make- Legrand/Hegger /L&T

Supply and fix MCB single pole & neutral 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. Make:-Legrand, L&T, Hegger

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. Make:-Legrand, L&T, Hegger

Earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (.c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.1,29,285.00/- ]

M/s JAYPEE ENTERPRISES

Bidder Name

DEESHA CONSTRUCTIONS

M/s JAYPEE ENTERPRISES