ELECTRICAL WORK

Amount

INCREASING CAPACITY OF T/Fs (1) FROM 16 KVA TO 25 KVA (TOTAL-20 NOs) AT VILLAGECHATURPUR, PURE BARWAN SINGH, PURE KHAT-KHAT, PURE JIYAN UNDER S/S CHHATOH, VILLAGE BAIRAM PUR S/S KARAHIYA, VILLAGE MURTAZA NAGAR, REWHARA, GADHI CHAURAHA, DANDUPUR, FATEHA BAD, BARA DEEH, RAGUNATHPUR KATAULI, KOLA HAIBATPUR, GADHIYANI, PURE MAHAWAR, GAUWA CHAURAHA UNDER S/S SUCHI, VILLAGE KHERWA, PURE THAURI, RAJAPUR, PURE MANGAL UNDER S/S CHHATOH (2) FROM 16 KVA TO 63 KVA-01 NOs AT VILLAGE PURE BANSHI WITH NEW CONSTRUCTION OF D/P STRUCTURE (3) FROM 25 KVA TO 63 KVA-10 NOs. AT VILLAGE KALLU JALALPUR, PURECHERA KANHPUR, BUBE KA PURWA, RANGAUTI, CHHOTE SARAINABH, BADI SAAINABH, KARAHIYAN DEVI, KHAJURI, ORI KA PURWA AND 10 NOS. T/F AT VILLAGEKAUSHAL KA PURWA, KATEHA, GARAHI, BAGAHA, KARATHAN, BACHHU KA PURWA, DEVI NAGAR, MAHERI, SARPATAHA, LAMBUI WITH NEW CONSTRUCTION OF D/ P STRUCTURE (4) FROM 63 KVA TO 100 KVA-06 NOs. AT VILLAGE MEJAR GANJ, TIWARI KA PURWA UNDER S/S SUCHI , AND VILLAGE KANAK PUR, SUJWARIYA, PURE KHAT-KHAT-1, PURE KHAT-KHAT-2 (5) FROM 100 KVA TO 250 KVA-01 NOs. AT VILLAGE KHUDAGANJ NASEERA BAD S/S CHHATOH (TOTAL T/F 48 NOS.) AND (6) INSTALLATION OF NEW 25 KVA T/F -02 NOs. AT VILLAGE DUNDI BARGADHI & TIKARIYA NASIRABAD (7) INSTALLTAION OF NEW 63 KVA T/F--01 NOs. AT VILLAGE PURE GURUDEEN CHHATOH (8) INCREASING CAPA CITY FROM 100 KVA T/F TO 250 KVA T/F-01 NO. , AT BILALI MASZID NEAR POST OFFICE NASEERABAD (9) CONSTRUCTION OF NEW LT. LINE -100 Mtrs. AT VILLAGE KALANDER GARHA CHHATOH, UNDER BUSINESS PLAN 2024-25, IN GEOGRAPHICAL AREA OF EXECUTIVE ENGINEER, ELECTRICITY DISTRIBUTION DIVISION-SALON, RAEBARELI IN JURIDUCTION OF EXECUTIVE ENGINEER, ELECTRICITY DISTRIBUTION DIVISION-SLON, RAEBARELI. (Total 52 Nos)

Carriage of ST POles and other related materials from ESC Tripula to work site with loading- unloading and proper stacking at a Place. as per above details of Villages.

Carriage of PCC POles and other related materials from ESC Tripula to work site with loading- unloading and proper stacking at a Place. as per above details of Villages.

Carriage of 250KVA T/F and other related materials from ESC Tripula to work site with loading- unloading and proper stacking at a Place. as per above details of Villages.

Carriage of 100 KVA T/F and other related materials from ESC Tripula to work site with loading- unloading and proper stacking at a Place. as per above details of Villages.

Carriage of 63 KVA T/F and other related materials from ESC Tripula to work site with loading- unloading and proper stacking at a Place. as per above details of Villages.

Carriage of 25 KVA T/F and other related materials from ESC Tripula to work site with loading- unloading and proper stacking at a Place. as per above details of Villages.

Cartage of Loose line material including LT PVC/Cable Allmun/ ACSR/RABBIT/AB /XLPE CABLE/A.B. Cab. L.T. Cable, weasel Conductor, Earth wire 7/14 SWG, Pin Insulators, Disc Insulatos, Top Channel, Stay Set, Disc Fitting 45/70 KN (T&C), Stay Clamp, 11 KV 'V" Type Cross Arms,11KV F Clamp, D/P Clamp, V type Cross Arm, Disc Insulators, Stay Wire, SS Base Angle, Earthing Rod, Holding Clamp, SS Base Channel,T-Off Channel, Top Channel, LTDP Three Phase, G.I. Wire 6 SWG, Dropper Channel, Holding Clamp, F Clmp, LT Shackel Insulators, PVC Armed Cable (3.5X70sqmm).I/D & O/D cable Jointing kit., 11 KV TPMO, Copper L-Piece 50x225x10mm, Copper L-Piece 50x225x12mm, Composit Pin Insulators, Aumini.Lugs Crimpint Type & other remaining items. As per required Estimate.

LABOUR & ERRECTION CHARAGES:-

Digging of Pits then Errection of ST/PCC Poles alongwith all required accesories as per RESPO norms.

Grouting of ST/PCC Pole with grouting materials as per RESPO norms.

Earthing of ST /PCC Pols as per RESPO norms.

Dismantling of old existing 16 KVA single Phase T/F from Pole/D/Pole, then stacking of dump site with loading unloading, as per above details of Villages.

Dismantling of old existing 25 KVA T/F from D/Pole then stacking of dump site with loading unloading, as per above details of Villages.

Dismantling of old existing 63 KVA T/F from D/Pole then stacking of dump site with loading unloading,

Dismantling of old existing 100 KVA T/F, from D/Pole/ plinth, then stacking of dump site with loading unloading, as per above details of Villages.

Errection/Re-errection of double pole by.PCC Pole, then grouting of Pole with grouting materials including fitting of all accessories items, as per RESPO Norms. as per above details of Villages.

Mounting of 25 KVA T/F on New Constructed D/Pole/Four Pole Structure alongwith fitting of all related accessories, earthing of T/F body & neutral As per RESPO norms.

Mounting of 63 KVA T/F on New Constructed D/Pole/Four Pole Structure alongwith fitting of all related accessories, earthing of T/F body & neutral As per RESPO norms.

Mounting of 63 KVA T/F on existing D/Pole/Four Pole Structure alongwith fitting of all related accessories, earthing of T/F body & neutral As per RESPO norms.

Mounting of 100 KVA T/F on New Constructed D/Pole/Four Pole Structure alongwith fitting of all related accessories, earthing of T/F body & neutral As per RESPO norms.

The work for Earthing, Fensing and excavation of new Plinth size 2.00X2.00X1.50 for making outer wall of Plinth by 1st class brick work in Cement mortar of ratio1:6 of filling earth in Plinth and providing Ston ballast and fixing 02 No.90 Iballs Rail pieces (6.9 Mtr) of proper distance and then plastering the top and all side of plinth wall with cement Corse and sand in ratio 1:4 and then proper spraying of water alongwith All materials & Labour for Mounting of 250 KVA T/Fs on Plinth alongwith fitting of all accessories,under BUSINESS PLAN 2023-24, as per RESPO Norms.

Labour Charges for earthing of 250 KVA 11/0.4 KV Power Transformers completed for digging of 60 fit Borewell type pit (1.5-inch diameter) to install 60 fit long M.S. Pipe (60 fit long) with 1.5-inch diameter work followed by connection of M.S. Stirp 50X6 mm size for Suitable length to G.I. Pipe through proper welding ( Aluminium paint covering of welded joint) with tightening of nuts & bolts and fitting of spaces by homogeneous mixture of coke & sault against medium power transformer body and neutral earthing these includes connection of M.S Strip fot sepret common pit as there will be one pit of each earthing. All rewuired material will be provided by contractor.

Making/Errection/Installation/painting/gouting/welding/febrication/earthig work of Wirmesh Fancing of Jali alongwith Angle isn size of 35X35X5X2500 mm with Nut & Bolts, Washer, Earthing Rod & G.I. wire. Making of 01 No. Gate by M.S. Angle in size of 35X35X5X1000 mm with Nut & Bolts Washer, Earthing Rod & G.I. wire. One No. Gate of M/S Angle in size of 25X5 mm with wiremesh and each of the same. Grouting of M.S. Angle and other required Angles with Grouting materials as per RESPO Norms, under BUSINESS PLAN 2023-24, under EDD Salon, Raebareli. All rewuired material will be provided by contractor.

Digging of Pits, fixing Nozzling & grouting of Stay Rod inclucing fitting of all accessories with grouting materials as per RESSPO Norms

Laying , stringing & sagging of ACSR Weasal Conductor including all associated work & making clearance of Road with Joint/jumpers & binding on insulators as required.

Laying , stringing & Fixing of LTPVC Cable 1X240 sq.mm . as per above details.

Laying , stringing & Fixing of LTPVC Cable 1X400 sq.mm . as per above details.

Laying , stringing & Fixing of Cable Allmunm. 3.5 Sq.mm PVC. as per above details.

Laying , stringing & Fixing of LT AB Cable (3X50+(1x35)+(1x16) sq.mm . as per above details.

Laying , stringing & Fixing of Cable Allmunm. 3.5 Sq.mm PVC. as per above details.

Making/Fixing/Installation of 11 KV Disc Insulators

Making/Fixing/Installation of 11 KV Disc Fittings.

Making/Fixing/Installation of 11 KV Composit Pin Isulators.

Making/Fixing/Installation of 11 KV "V" Type Cross Arms.

Making/Fixing/Installation of S.S. Base Channels.

Earthing of T/F body & neutral as per RESPO norms.

Work for Installation/fixing of Top Channel.

Work for Installation/fixing of L.T.M.S. Clamp for PCC Pols

Making/Fixing/Installation of Dropper Channel

Making/Fixing/Installation of L.T.D.B. Three Phase

Making/Fixing/Installation of M.S. Angle 75X75X6X2028

Making/Fixing/Installation of Aluminium Lugs Crimping Type 1X400 sq.mm

Recd. Back 16 KVA old T/F from site to ESC Tripula, Raebareli wilth loading unloading.

Recd. Back 25 KVA old T/F from site to ESC Tripula, Raebareli wilth loading unloading.

Recd. Back 63 KVA old T/F from site to ESC Tripula, Raebareli wilth loading unloading.

Recd. Back 100 KVA old T/F from site to ESC Tripula, Raebareli wilth loading unloading.

Work for Installation/fixing of 'F" Clamp for PCC Poles with Nut & Bolts, Material Provided by Contractor

Making/Fixing/Installation of Holding Clamp for PCC Poles With Nuts & Bolt, Material Provided by Contractor

Making/Fixing/Installation of Holding Clamp for Round Poles With Nuts & Bolt, Material Provided by Contractor

Work for Installation/fixing of Stone Pad 300X300X75 , Material Provided by Contractor

Work for Tightening/fixing of 11 KV Fuse Set, Material Provided by Contractor

Work for Making/ Installation Shackel Insulators, Material Proided by Contractor.

Work for tightening of Nuts & Bolt, Material Provided by Contractor

Work for Installation/fixing of Danger Board and Painting Number Mark with Clamp, Material Provided by Contractor (6+6)

Work for Installation/Fixing/tightening of Copper "L" Piece, Suitable for 250 KVA T/F, Material Provided by Contractor

Work for Installation/fixing of All.LUG Various Size , Material Provided by Contractor

Work for Installation/fixing of Tail Less Unit 500 Amp , Material Provided by Contractor

Work for Installation/fixing of Tail Less Unit 300 Amp , Material Provided by Contractor

NATIONAL ENTERPRISES