CERTAIN REPAIR RENEWAL WORKS TO GE(WEST COMPLEX) N P H AND FAFA 2 AND CERTAIN BR REPAIR AND PERIODICAL SERVICES TO AW AND OUT STATION UNITS SUCH AS (BA BB AND BC) AND UNITS OF AM AF AND AP UNDER AGE BR I OF GE (WEST) FEROZPUR CANTT

Amount

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

M&L 50 mm thick cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

M&L Cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in floor topping, 40mm thick, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etccomplete all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including laying of sand cushioning, etc, complete all as specified and directed. Note :- Sand will be measured and paid for seperately. Makes:- SITCO, POOJA CONCRETE, MOHINDRA INDUSTRIES, KB SPUN, SARAL IMPEX, RANA TILES CO, SHINO TILES, RN TILES & PAVERS, SWASTIK ALW

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in filling of steel chowkhats,bed blocks, coping etc including necessary form work complete all as specified and directed.

Demolation brick work built in cement mortar of any specification and in any position complete all as specified and directed.

M&L Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.

All as per Srl item 09 here-in-before but using old bricks retrieved from demolition including cleaning and removal of mortar from old bricks complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.

M&L non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.06 sq m but not exceeding 0.11Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in cement mortar 1:6 complete all as specified and directed.

M&L non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in cement mortar 1:6 complete all as specified and directed.

M&L non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with 10 mm thick in cement mortar 1:4 complete all as specified and directed.

M&L Glazed coloured and cereamic tiles in vertical surfaces 450mmX300mm & 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick rendering cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as specified and directed.

M&L Chequered cement concrete coloured tiles 20cm x 20cm x 25mm thick using grey cement and no pigment set over & including 20 mm thick screed bed or bedding layer in cement mortar 1:6 with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles complete all as specified and directed.

M&L Granite (of any type) tiles 16- 20mm thick machine cut, bedded andjointed with grey cement slurryand pointed with white cementwith admixture of pigment to match the shade of granite stone including grinding and polishing with 15mm thick screed in cement mortar 1:4 complete all as specified and directed.

M&L Vitrified ceramic tiles 10mm thick (Square/rectangular)polished area of each tiles exc 0.36Sqm and not exceeding 0.42Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar1:6 for laying floor finishes complete all as specified and directed.

M&L light shade Vitrified tile 10mm thick polished, area of tile not exceeding 0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick screed in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm complete all as specified and directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm each.

Taking down Shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down Shutters of any descriptiont exceeding 1 Sqm but not exceeding 2 sq. m each complete all as specified and directed.

S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010) complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed. Makes: Rajshri or equivalent in approved makes.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.

S&F 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and directed.

S&F 35mm thick second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F Mild steel framed work of as in grills/guard bars shouldered with steel window/ ventilator frames complete all as specified and directed.

S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150mm long aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150mm Extruded aluminium alloy handle acomplete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F mild steel pressed handle ,oval type ,125 mm stoved enameled black and fixed with steel screw complete all as specified and directed.

S&F MS barrel tower bolts stone enamelled black with bright bolt,200mm length of bolt complete all as specified and directed.

S&F 300mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nutscomplete all as specified and directed.

S&F butt hinges 100mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type B21 complete all as specified and directed.

S&F butt hinges 125mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type B-21 complete all as specified and directed.

S&F door closer hydraulically regulated designation No 2 universal type suitable for door shutter of 701 to 850mm thick in width and of weight between 36 to 60 kg of aluminium (Die cast body) in repairs complete all as specified and directed.

S&F 300mm mild steel rait rail rod pattern springs including roller and roller plate as fixed in repair complete all as specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and directed.

M&L 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F in repair to 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares not exceeding 0.50 Sqm including hacking out old broken glass and putty/beading complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples in repaircomplete all as specified and directed.

S&F anodised aluminium door window , ventilator etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of Jindal /Hindalco (or) Equivalent make of approved size, including necessary joining cleats, glazing clips,powder coated aluminium snap beading, screws, including necessary anodised aluminium fittings like handles etc including taking down complete all as specified as per manufacturers instructions complete all as specified and directed. Note: EPDM Rubber beading/gasket measured and paid for seperatley.

S&F solar control film 25 micron reflective sticked to glass panes as per manufacturers instruction complete all as specified and directed.

Supply only EPDM Rubber beading around glass in aluminium windows /ventilator shutters complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 sqm in each pane complete all as specified and directed.

Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover filletscomplete all as specified and directed.

S&F in repair to Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed.

S&F in rep of Gypsum Board 6 to 7 mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) including aluminium anodised/powder coated snap grid frame 605mmX605mm for false ceiling incl hanging arrangement complete all as specified and directed. Note:-The hanging stay wire shall not be less than 4.00mm thick all are included in the above mentioned item only.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipecomplete all as specified and directed.

Taking up or down 15 mm existing steel tubing and connections old steel tubing laid in floorsand removing to store complete all as specified and directed.

Taking up or down 20 mm existing steel tubing and connections old steel tubing laid in floorsand removing to store complete all as specified and directed.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed.

S&F in repair 15mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) fixed in repairs complete all as specified and directed.

S&F in repair 15mm bore Stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch orbutterfly handle,screwed bothends for ironpipe or forunions and fixed complete all as specified and directed.

S&F in repair 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass as in repair complete all as specified and directed.

S&F in repair PVC connection both end brass union and length 450 mm long for 15 mm bore pipe complete all as specified and directed.

S&F in repair Bib tap of CP brass, 15mm bore, fancy type screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, as in repair complete all as specified and directed.

S&F in repair of CP WHB mixer 15mm bore mixing and hot and cold water scrwed down for iron pipe and fixed. and waste system with 450mm long braided hoses complete all as specified and directed.

S&F chromium plated fancy type15mm bore dia hot and cold wall mixer with provision for over head with 115mm long bend pipe one upper side connecting legs and wall flanges complete all as specified and directed. Notes:-FLR 5219 N of make "Jaquor" or techno-commercially equivalent in approved makes.

S&F in repair Rotational moulded Polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and as directed.

S&F in repair Rotational moulded Polyethylene water storage tank of 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and as directed.

S&F in repair 15mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed,complete all as specified and directed.

S&F in repair 20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

Removing & refixing of existing water tank of capacity 500/250 Ltr etc setting aside (or lowering if required) for repair, cleaning etc and hoisting reconnecting & refixing in position complete all as specified and directed.

S&F in repair 15mm bore dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms/20mm- 125gms) as fixed in repairs complete all as specified and directed.

S&F in repair 15mm bore dia Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) as fixed in repairs complete all as specified and directed.

S&F in repair Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed.

S&F in repair Vitreous china white wash down water closet (pedestal pattern) including PVC sheet cover, Jet and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified and directed.

S&F 1.00 mm thick stainless steel sink, plugs, washers, PVC waste pipe, union, CP coupling & fixed in RCC cooking platform, overall size of sink 915mmx460mm, bowl size 410mmx330mmx160mm as in repair complete all as specified and directed.

S&F PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs. as fixed in repairs complete all as specified and directed.

S&F in repair Wash hand basin, flat back 550mmx400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.

S&F 20 mm Mild steel curtain rod PVC powder coated curtain rod with fancy type brackets including with all fittings as fixed in repair complete all as specified and directed.

S&F PVC end cups fancy type for curtain rod as in repaire complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheet on roof covering complete all as specified and directed.

S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with J- type or L- type hook bolts complete all as specified and directed.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with J- type or L- type hook bolts complete all as specified and directed.

S&F 0.63 mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Dismantling unframed timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed.

Dismantling unframed fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.

S&F Rolled section as in post /pillars hip and jack rafters; purlins where connected with angle cleat or other connecting plate etc of fe 410-W(grade E-250) quality 'B' including fabrication , erection and fixing complete all as specified and directed.

S&F Mild steel screw bolts of 12 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 15cm and not exceedingc 22.5cm longcomplete all as specified and directed.

M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over red lead primed steel surfaces complete all as specified and directed.

M&L Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 15 mm thick cement plaster in cement mortar 1:4 on other than fair faces of brick/concrete work surfaces compound finished fair and even all complete all as specified and directed.

M&L rendering 10mm thick cement plaster in cement mortar 1:6 on fair faces of brick or concrete surfasces finished even and smooth (without using extra cement ) complete all as specified and directed.

M&L Rendering 5mm thick in cement mortar 1:3 on any face of brick walls or conrete surfaces, surfaces finished even and smooth without using extra cement, in ceiling, soffits of chajja or similar location etccomplete all as specified and directed.

M&L Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified and directed.

M&L White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and directed.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L brushing neat cement slurry with 3 kg of cement per square metre complete all as specified and directed.

M&L 10 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane complete all as specified and directed. Note: WPC shall be measured and paidffor separately

M&L 10mm thick on fair faces of brick work or concrete surfaces in cement mortor 1:4 mixed with water profing comund @3% by weight of cement content as in verticle surfaces and finished even and smooth without using extra cement complete all as specified and directed. Note: WPC measured and paid for seperately.

Supply only water proofing compound.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.

M&L Tack coat of industrial bitumen 85/25 @ 1.20 Kilogram per square metre including preparation of roof surfaces complete all as specified and directed.

M&L 80mm thick average consolidated thickness mud phuska on flat roof ncluding 25mm thick mud plaster complete all as specified and directed.

S&F 40 mm thick brick tiles laid on mud mortar and joints grouted flus in cement mortar(1:3) mixed with 5% of crude oil by wt of cement on mud phuska complete all as specified and directed.

All as item No 118 here-in-before but except tiles complete all as specified and directed.

Demolition of cement concrete in sunken portion any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L 15mm thick cement mortar 1:3 with WPC on walls as well as on sunken floor portion finished even and smooth using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid for separately.

M&L PCC 1:5:10, type E-2 (using 40 mm graded aggrigate ) as in filling under sunken portion complete all as specified and directed.

M&L 25mm tick PCC 1:2:4, type B1 (using 20 mm graded aggrigat) as in floor finished even and rough to receive top layer complete all as specified and directed.

Taking down eaves gutters and rain water pipes( any size or pattern), including all fittings heads shoes bends swan-necks etc complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) with access door bends any radius complete all as specified and directed.

S&F 110 mm dia PVC (SWR) with access door bends any radius complete all as specified and directed.

S&F PVC (SWR) 75 mm floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L welding in repairs exc. 6mm but not exceeding 9 cm in length, thickness of metal to be welded complete all as specified and directed.

M&L preparation of old decorated surfaces of walls (plastered or un-plastered) by brooming down and applying one coat of white lime wash (white washing) on walls including cornices, pillasters etc all as specified and directed .

M&L preparation of old decorated surfaces of walls (plastered or un-plastered) by brooming down and applying one coat of colour wash including cornices, pillasters etc all as specified and directed

M&L Preparation of old wood or wooden based surfaces of any description not otherwise description over 10cm width or girth and applying one coat of synthetic enamel paint on old painted surfacescomplete all as specified and directed.

M&L Preparation of old steel surfaces of any description not otherwise description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L washing, rubbing down & stopping of painted surfaces and applying one coats of cement base paint on wall including proper curing complete all as specified and directed.

M&L washing, rubbing down & stopping of distempered & painted surfaces & applying one coat of oil bound distemper on wall surfaces including proper curing complete all as specified and directed.

M&L Complete removal of existing treatment and preparing old/New decorated surfaces (Plastered or unplastered) by brooming down or steel wire brushing scrapping down smoke soot,moulds moss and efflorescent salts and trading oil and greasy spots etc apply after finishing wall surface with birla wall care putty /JK wall care putty to get fair finish on that applying two coats of oil bound distempered over a coat of primer on plastered surfaces complete all as specified and directed.

M&L washing rubbing down and stopping of distempered and painted surfaces and applying one coat of camouflage paint on wall surfaces including proper curing all as specified and directed.

M&L sand mat finish on wall surface including removal of old repair sand mat and cleaning the surface neatly and complete all as specified and directed

M/s Sarup Singh (BID ID -3515865)

Karan Engineers (BID ID -3515819)