Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹8.0 L
EMD Value
₹8,000
Closing Date
27 Feb 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
ZONAL OFFICER
zone 10
Repair and Improvement works to the UPHC at Ashok Nagar 35th Street in Div-135, Unit-31, Zone-10
2026_CoC_667162_1
Z.O.X.C.No. E1/KKM/139/2026(Retender)
Limited
Civil Works
Works
KODAMBAKKAM
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹8,000
27 Feb 2026
26 Feb 2026
27 Feb 2026
26 Feb 2026
27 Feb 2026
26 Feb 2026
Dismantling - Floor finish & dadooing walls i...Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs
Supplying and filling in foundation, basement, etc...tion and as directed by the departmental officers.
Cement Concrete 1:5:10 (One cement, Five crushed ...partmental officers - Mixing by mechanical means
Providing and laying in position, standardised con...the Department for the excess usage of materials).
Supplying and erecting steel centering including n...l be given after the concrete is laid). FOUNDATION
Supplying, fabricating and placing in position Rib...nt and binding wire) Upto plinth / Basement level
Brick work in following Cement Mortar using best q...Executive Engineer in charge. In Cement Morter 1:3
Plastering the surface of walls with Cement Mortar...d as directed by the departmental officers. (Wall)
Painting New Plastered Wall Surface with Two finis...ed by the Executive Engineer before use on works.)
Supplying and Fixing MS Ladder width 45cm using 50x50x6mm MS Angle.
Solid panel PVC door with frame - (Solid PVC Doo...45mm with suitable rabate for housing the shutter)
Fabricating Supplying and fixing in position of Al...e got approved by the Executive Engineer incharge.
Supplying, fabricating and fixing in position of A...e got approved by the Executive Engineer incharge.
Supplying , fabricating and fixing in position Alu...e anodic film thickness 15 microns etc., complete.
Supplying and fixing in position best quality and ...rks). White Glazed Wash Hand Basin - with pedestal
Paving the floor with best quality vitrified Til...pproved by Executive Engineer before use on works)
Roofing with Galvanised corrugated iron sheet of thickness 0.8mm
Supplying, laying and jointing PVC pipes (having w...ove ground level. For laying PVC pipes of dia 25mm
Supplying, laying and jointing PVC pipes (having w...ove ground level. For laying PVC pipes of dia 20mm
Supplying, laying and jointing PVC pipes (having w...ove ground level. For laying PVC pipes of dia 40mm
Supplying and fixing in position 15mm dia b...Executive Engineer before use on the works) SD Tap
Supplying and fixing position CI Nahani Trap / Flo...p of size 100 x 75mm with stainless steel gratings
Brass Isolation Valve suitable for the coppe...7396 / 1987 Sepecification. - 28mm Isolation Valve
Brass Isolation Valve suitable for the coppe...7396 / 1987 Sepecification. - 42mm Isolation Valve
Construction of INSPECTION CHAMBER following ...per standard specification. CLEAR SIZE 0.60 X 0.60
Manufacturing, Supplying and Fixing of Stainless S...onveyance, electrical charges, etc. complete
Cost of supply of 20w 4 feet LED fitting with LED tube complete set (Patty and LED tube)
Wiring with 2 x 1.5 sq.mm. PVC insulated SC unshe...light point / fan point (for electronic regulator)
Supply and providing 1000 litres capacity Priming Tank made up of PVC.
Installation of Vertical Bored cast in situ RCC pi...eparately ) Grade of Concrete: M25 300 mm dia pile
AC Ceiling Fan complete 1200mm (48”) Sweep ...th 300mm Down Rod (without Regulator) (Higher End)
Light Duty Steel truss
stage.html
html • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
BOQ_801475.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .