Replacement of outdoor feeder pillar panels at ACTREC campus

Amount

Supply, laying, connecting, testing and commissioning of 1.1kV , LT Armoured cable 3.5 Core, XLPE (E) cable including all accessories The unit rate for the job shall include : 1)Supply of Cables 2)Delivery of cables at site. 3)Unloading at site store / site 4)Shifting of cable from site store to place of installation. 5)Meggar testing of cable prior to laying. 6)Laying of cables in ground through excavations up to 900mm 7)Supply and fixing of route markers at every 30 mtr. and at change of direction. as approved by EIC 8)Earthing the glands and armouring with earthing clamp and jumper and also connecting to common earth bar. 9)Testing of cables including megger testing at site after connection of end connection of cable. Cable, conforming to IS: 1554/Part 1/1998, XLPE, Aluminium stranded conductor, armoured, 1100 V class The rate also includes excavation of all kind of soil / road crossing up to 900mm manual of JCB excavation as per site conditions and back filling of the same and making road crossing as existing

SITC of 3.5Cx240 Sq.mm A2XFY Aluminium Conductor

SITC of 3.5Cx35 Sq.mm A2XFY Aluminium Conductor

SITC of 3.5Cx50 Sq.mm A2XFY Aluminium Conductor

SITC of 3.5Cx25 Sq.mm A2XFY Aluminium Conductor

Supplying & erecting heavy duty flange type brass double compression ype cable glands for end jointing of various sizes for PVC armoured cable with brass washers, rubber rings complete with cable ends & leads connected, with gland double earthing, work completed in all respect all as per instructions and as directed by E-I-C, ES

SITC of Gland for 3.5 x 25 sq. mm

SITC of Gland for 3.5 x 35 sq. mm

SITC of Gland for 3.5 x 50 sq. mm

SITC of Gland for 3.5 x 150 sq. mm

SITC of Gland for 3.5 x 240 sq. mm

SITC of Gland for 3.5 x 300 sq. mm

Supplying & erecting crimping type copper lugs confirming to IS suitable for cables evenly crimped with high pressure tools & connected to switch gear terminals with brass/ cadmium plated nut bolts in an approved manners. all as directed by O-I-C, ES

SITC of 16 Sqmm lugs

SITC of 25 Sqmm lugs

SITC of 35 Sqmm lugs

SITC of 50 Sqmm lugs

SITC of 70 Sqmm lugs

SITC of 120 Sqmm lugs

SITC of 150 Sqmm lugs

SITC of 240 Sqmm lugs

SITC of 300 Sqmm lugs

SITC of Hot dipped GI earth plate electrode 600 x 600 x 6.3 mm earth station 2.5 mtr below the ground level --- Same as above-- as per drawing & specifications complete with all required materials like coke/charcoal, salts , brass nut bolts & washers, watering arrangement, GU pipe (B class) concrete/brick chamber, heavy duty cast iron cover plate & excavation in ground, refilling & removing of excess earth within a radius of 500 mtr.etc. scope also includes dewatering, shoring, & consolidation etc.

Earthing Conductor Supply, laying, connection and testing bare earthing conductor GI Strip 2 x 3 mm for inter-connecting the earthing stations and various equipment in built up trenches, walls/ceiling, buried in ground generally as specified and shown on the drawing complete with :1)Supply & fixing accessories like earthing clamp, saddle, etc.2)Supply of corrosion protection of buried conductors with bituminous coating3)Supply of Test links (Copper/GI) etc.

ask enterprises

RUPCHAND B ELECTRICALS PRIVATE LIMITED

kokan electrical works

Ramesh Electrical and Mechanical Works

OM POWER SYSTEMS