Repair/replacement of leakage water supply pipe line and other connected misc work of Zone B and Zone D area at Military Station Bikaner

Amount

Note for serial item No. 2.00 to 91.00:- (i) All items considered in work for repair and maintenace at Mil Stn Bikaner. (ii) All leakage of water supply pipe lines complaints shall be rectified by the contractor within 12 hours from the launch of complaint time. If contractor shall be fail to rectified the above said complaint in given time period then a penalty @ Rs. 200 Per day will be recovered against the each Job. (iii) All T&P and vehicles for transpotation will be provided by the contractor.

Excavating in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exceeding 10 Sqm on plan & not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated soil/material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed.

M&L for cutting/dismantling of PCC hardstanding / Interlocking tiles path / WBM road with soling & premix carpet of any description for replacement of 500mm bore water supply pipe line and disposal of debris & rubbish to a distance exc 250m but not exc 500m and making good the same with & including plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) after replacement of pipe line complete all as specified & as directed.

M&L for dismantling carefully and taking up or down existing serviceable steel water tubing and re-fixing/re-laying jointing and testing old serviceable galvanized steel water tubing medium grade of 15mm bore including cleaning the pipe from inside & outside properly including rust & mud removal with & including new fittings and fixed to walls and ceilings, roof or laid in floors/trenches in new or old position complete all as specified and directed.

M&L for dismantling carefully and taking up or down existing serviceable steel water tubing and re-fixing/re-laying jointing and testing old serviceable galvanized steel water tubing medium grade of 20mm bore including cleaning the pipe from inside & outside properly including rust & mud removal with & including new fittings and fixed to walls and ceilings, roof or laid in floors/trenches in new or old position complete all as specified and directed.

M&L for dismantling carefully and taking up or down existing serviceable steel water tubing and re-fixing/re-laying jointing and testing old serviceable galvanized steel water tubing medium grade of 25mm bore including cleaning the pipe from inside & outside properly including rust & mud removal with & including new fittings and fixed to walls and ceilings, roof or laid in floors/trenches in new or old position complete all as specified and directed.

M&L for dismantling carefully and taking up or down existing serviceable steel water tubing and re-fixing/re-laying jointing and testing old serviceable galvanized steel water tubing medium grade of 40mm bore including cleaning the pipe from inside & outside properly including rust & mud removal with & including new fittings and fixed to walls and ceilings, roof or laid in floors/trenches in new or old position complete all as specified and directed.

M&L for dismantling carefully and taking up or down existing serviceable steel water tubing and re-fixing/re-laying jointing and testing old serviceable galvanized steel water tubing medium grade of 50mm bore including cleaning the pipe from inside & outside properly including rust & mud removal with & including new fittings and fixed to walls and ceilings, roof or laid in floors/trenches in new or old position complete all as specified and directed. Note serial item No. 6.00 to 10.00 : (i) The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used. (ii) Cost to be deemed of broken of PCC / tiling / Kota stone etc (iii) Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 50/40 mm bore cast iron pipe/specials with nuts, bolts including cutting of pipe line, jointing necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 80 mm bore cast iron pipe/specials with nuts, bolts including cutting of pipe line, jointing necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 100 mm bore cast iron pipe/specials with nuts, bolts including cutting of pipe line, jointing necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 150 mm bore cast iron pipe/specials with nuts, bolts including cutting of pipe line, jointing necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 200 mm bore cast iron pipe/specials with nuts, bolts including cutting of pipe line, jointing necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 250 mm bore cast iron pipe/specials with nuts, bolts including cutting of pipe line, jointing necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 450 mm bore cast iron pipe/specials with nuts, bolts including cutting of pipe line, jointing necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-15, suitable for 500mm/600mm bore cast iron pipe/specials with nuts, bolts including cutting of pipe line, jointing necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 80mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 100mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 150mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 200mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 250mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 450mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 500mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 600mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

Supply, laying, jointing and testing centrifugally cast Ductile Iron spun pressure pipes (Class K9) of 450 mm bore with internal cement mortar lining and external zinc coating (130 gm/sqm minimum) and bituminous finish layer (minimum thickness 70 microns) with socket & spigot ends (ISI marked) conforming to IS 8329-2000 suitable for push on rubber gasket/tyton joint laid in trenches including taking up or down old unserviceable CI Pipe of 450mm bore complete all as specified & as directed. Note :- (i) Excavation & earthwork, DI fittings / specials shall be measured & paid for separately under relevant items of this Schedule. (ii) Cost of rubber gasket joint shall be deemed to be included in quoted rate of this item.

Supply, laying, jointing and testing centrifugally cast Ductile Iron spun pressure pipes (Class K9) of 300 mm bore with internal cement mortar lining and external zinc coating (130 gm/sqm minimum) and bituminous finish layer (minimum thickness 70 microns) with socket & spigot ends (ISI marked) conforming to IS 8329-2000 suitable for push on rubber gasket/tyton joint laid in trenches including taking up or down old unserviceable CI Pipe of 300mm bore complete all as specified & as directed. Note :- (i) Excavation & earthwork, DI fittings / specials shall be measured & paid for separately under relevant items of this Schedule. (ii) Cost of rubber gasket joint shall be deemed to be included in quoted rate of this item.

Supply, laying, jointing and testing centrifugally cast Ductile Iron spun pressure pipes (Class K9) of 250 mm bore with internal cement mortar lining and external zinc coating (130 gm/sqm minimum) and bituminous finish layer (minimum thickness 70 microns) with socket & spigot ends (ISI marked) conforming to IS 8329-2000 suitable for push on rubber gasket/tyton joint laid in trenches including taking up or down old unserviceable CI Pipe of 250mm bore complete all as specified & as directed. Note :- (i) Excavation & earthwork, DI fittings / specials shall be measured & paid for separately under relevant items of this Schedule. (ii) Cost of rubber gasket joint shall be deemed to be included in quoted rate of this item.

Supply, laying, jointing and testing centrifugally cast Ductile Iron spun pressure pipes (Class K9) of 200 mm bore with internal cement mortar lining and external zinc coating (130 gm/sqm minimum) and bituminous finish layer (minimum thickness 70 microns) with socket & spigot ends (ISI marked) conforming to IS 8329-2000 suitable for push on rubber gasket/tyton joint laid in trenches including taking up or down old unserviceable CI Pipe of 200mm bore complete all as specified & as directed. Note :- (i) Excavation & earthwork, DI fittings / specials shall be measured & paid for separately under relevant items of this Schedule. (ii) Cost of rubber gasket joint shall be deemed to be included in quoted rate of this item.

Supply, laying, jointing and testing centrifugally cast Ductile Iron spun pressure pipes (Class K9) of 150 mm bore with internal cement mortar lining and external zinc coating (130 gm/sqm minimum) and bituminous finish layer (minimum thickness 70 microns) with socket & spigot ends (ISI marked) conforming to IS 8329-2000 suitable for push on rubber gasket/tyton joint laid in trenches including taking up or down old unserviceable CI Pipe of 150mm bore complete all as specified & as directed. Note :- (i) Excavation & earthwork, DI fittings / specials shall be measured & paid for separately under relevant items of this Schedule. (ii) Cost of rubber gasket joint shall be deemed to be included in quoted rate of this item.

Supply, laying, jointing and testing centrifugally cast Ductile Iron spun pressure pipes (Class K9) of 100 mm bore with internal cement mortar lining and external zinc coating (130 gm/sqm minimum) and bituminous finish layer (minimum thickness 70 microns) with socket & spigot ends (ISI marked) conforming to IS 8329-2000 suitable for push on rubber gasket/tyton joint laid in trenches including taking up or down old unserviceable CI Pipe of 100mm bore complete all as specified & as directed. Note :- (i) Excavation & earthwork, DI fittings / specials shall be measured & paid for separately under relevant items of this Schedule. (ii) Cost of rubber gasket joint shall be deemed to be included in quoted rate of this item.

Supply, laying, jointing and testing centrifugally cast Ductile Iron spun pressure pipes (Class K9) of 80 mm bore with internal cement mortar lining and external zinc coating (130 gm/sqm minimum) and bituminous finish layer (minimum thickness 70 microns) with socket & spigot ends (ISI marked) conforming to IS 8329-2000 suitable for push on rubber gasket/tyton joint laid in trenches including taking up or down old unserviceable CI Pipe of 80mm bore complete all as specified & as directed. Note :- (i) Excavation & earthwork, DI fittings / specials shall be measured & paid for separately under relevant items of this Schedule. (ii) Cost of rubber gasket joint shall be deemed to be included in quoted rate of this item.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings, fixed to walls and ceilings or laid in floors, including taking up or down unserviceable steel water tubing and connections of 15mm bore complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings, fixed to walls and ceilings or laid in floors, including taking up or down unserviceable steel water tubing and connections of 20mm bore complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings, fixed to walls and ceilings or laid in floors, including taking up or down unserviceable steel water tubing and connections of 25mm bore complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings, laid in trenches, including taking up or down unserviceable steel water tubing and connections of 15mm bore complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings, laid in trenches, including taking up or down unserviceable steel water tubing and connections of 20mm bore complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings, laid in trenches, including taking up or down unserviceable steel water tubing and connections of 25mm bore complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade of 40mm bore with & including all fittings, laid in trenches, including taking up or down unserviceable steel water tubing and connections of 40mm bore complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade of 50mm bore with & including all fittings, laid in trenches, including taking up or down unserviceable steel water tubing and connections of 50mm bore complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade of 80mm bore with & including all fittings, laid in trenches, including taking up or down unserviceable steel water tubing and connections of 80mm bore complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade of 100mm bore with & including all fittings, laid in trenches, including taking up or down unserviceable steel water tubing and connections of 100mm bore complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade of 150mm bore with & including all fittings, laid in trenches, including taking up or down unserviceable steel water tubing and connections of 150mm bore complete all as specified and as directed. Note for serial item No. 37.00 to 44.00 :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

S&F DI/CI fittings (ISI marked) for Flanged Pipes/spigot socketed pipes upto 150mm bore such as Bends, Tapers, Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged, connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth, complete all as specified & as directed. Note :- Excavation & earthwork, Joints shall be measured and paid for separately under respective items of this schedule.

S&F DI/CI fittings (ISI marked) for Flanged Pipes/spigot socketed pipes 200mm to 300mm bore such as Bends, Tapers, Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged, connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth, complete all as specified & as directed. Note :- Excavation & earthwork, Joints shall be measured and paid for separately under respective items of this schedule.

S&F DI/CI fittings (ISI marked) for Flanged Pipes/spigot socketed pipes 450mm to 600mm bore such as Bends, Tapers, Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged, connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth, complete all as specified & as directed. Note :- Excavation & earthwork, Joints shall be measured and paid for separately under respective items of this schedule.

Supply & fixing mild steel clamps made of flat iron 40x6mm in two halves for tapping through 40 to 80mm bore GI/CI/DI water pipe line including drilling and welding of 25mm GI socket and necessary rubber insertion, nut, bolts & washers, complete all as directed.

Supply & fixing mild steel clamps made of flat iron 50x6mm in two halves for tapping through 100 to 150mm bore GI/CI/DI water pipe line including drilling and welding of 25mm GI socket and necessary rubber insertion, nut, bolts & washers, complete all as directed.

S&F 15mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling and taking out old unserviceable gate valve complete, all as specified & directed.

S&F 20mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling and taking out old unserviceable gate valve complete, all as specified & directed.

S&F 25mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling and taking out old unserviceable gate valve complete, all as specified & directed.

S&F 40mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling and taking out old unserviceable gate valve complete, all as specified & directed.

S&F 50mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling and taking out old unserviceable gate valve complete, all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 80 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 80mm bore complete all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 100 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 100mm bore complete all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 150 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 150mm bore complete all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 200 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 200mm bore complete all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 250 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 250mm bore complete all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 450 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 450mm bore complete all as specified & directed.

Supply and fixing non return valve (NRV) of size 80mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, class ‘PN-1.6’, gun metal seat, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint including dismantling & taking out old unserviceable non return valve of 80mm bore complete all as specified and as directed

Supply and fixing non return valve (NRV) of size 100mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, class ‘PN-1.6’, gun metal seat, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint including dismantling & taking out old unserviceable non return valve of 100mm bore complete all as specified and as directed

Supply and fixing non return valve (NRV) of size 150mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, class ‘PN-1.6’, gun metal seat, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint including dismantling & taking out old unserviceable non return valve of 150mm bore complete all as specified and as directed

M&L for Valve Pit of internal size 900mm x 900mm x 600mm built in brick masonry complete all as specified in Particular Specifications and as shown on drawing No. BTD-811 Sheet No. 1/2 & 2/2 after dismantling of old valve Pit chamber complete all as specified and directed.

M&L for Valve Pit of internal size 1500mm x 1500mm x 1500mm built in brick masonry complete all as specified in Particular Specifications and as shown on drawing No. BTD-811 Sheet No. 1/2 & 2/2 after dismantling of old valve Pit chamber complete all as specified and directed.

S&F in replacement of Cast Iron Air Release Valve with 2 air outlets 80mm bore and fixed upto 450mm bore GI pipe line complete all as specified and as directed.

S&F in replacement of Cast Iron Air Release Valve with 2 air outlets 100mm bore and fixed to 500mm bore GI pipe line complete all as specified and as directed.

S&F in replacement of Cast Iron Air Release Valve with 2 air outlets 100mm bore and fixed to 600mm bore GI pipe line complete all as specified and as directed.

Dewatering from trenches and taking out of mud etc with the help of JCB or mud pump as required at site and taking out of broken/ cracked pipe 450mm/500mm/600mm bore including excavation, returning, filling and removing of surplus soil and making good disturbed on the both side complete all as specified and directed.

Dewatering from trenches and taking out of mud etc with the help of JCB or mud pump as required at site and taking out of broken/ cracked pipe 250mm/200mm bore including excavation, returning, filling and removing of surplus soil and making good disturbed on the both side complete all as specified and directed.

Dewatering from trenches and taking out of mud etc with the help of JCB or mud pump as required at site and taking out of broken/ cracked pipe 150mm bore including excavation, returning, filling and removing of surplus soil and making good disturbed on the both side complete all as specified and directed.

M&L for run lead joint for 80mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

M&L for run lead joint for 100mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

M&L for run lead joint for 150mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

M&L for run lead joint for 200mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

M&L for run lead joint for 250mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

M&L for run lead joint for 300/350mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

M&L for run lead joint for 450mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

M&L for run lead joint for 500mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

M&L for run lead joint for 600mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

M&L for repair to unserviceable sluice valve of size 80mm bore, dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material on serviceable spindle, grinding the material cutting the threads by lathe machine and fabrication on new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve complete all as specified & directed.

M&L for repair to unserviceable sluice valve of size 100mm bore, dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material on serviceable spindle, grinding the material cutting the threads by lathe machine and fabrication on new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve complete all as specified & directed.

M&L for repair to unserviceable sluice valve of size 150mm bore, dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material on serviceable spindle, grinding the material cutting the threads by lathe machine and fabrication on new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve complete all as specified & directed.

M&L for repair to unserviceable sluice valve of size 200mm bore, dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material on serviceable spindle, grinding the material cutting the threads by lathe machine and fabrication on new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve complete all as specified & directed.

M&L for repair to unserviceable sluice valve of size 250mm/300mm/350mm bore, dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material on serviceable spindle, grinding the material cutting the threads by lathe machine and fabrication on new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve complete all as specified & directed.

M&L for repair to unserviceable sluice valve of size 450mm bore, dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material on serviceable spindle, grinding the material cutting the threads by lathe machine and fabrication on new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve complete all as specified & directed.

M&L for repair to unserviceable sluice valve of size 500/600mm bore, dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material on serviceable spindle, grinding the material cutting the threads by lathe machine and fabrication on new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve complete all as specified & directed.

Supply, laying and jointing of 3 Layer (out green coloured UV stablized, middle back coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R (Polypropylene random copolymer) 110mm outer dia ISI marked concealed Pipes SDR 7.4 (PN-16), UV stabilised and antimicrobial fusion welded having thermal stability for hot and cold water supply all PP-R plain and brass threaded polypropylene random with all fittings laid in trenches including taking down old unserviceable PVC/PPR Pipe complete all as specified and directed. Make : Kanha Plastics Pvt Ltd (Brand - KPT)/Supreme/SFMC (Savour Fair Manufacturing Co Pvt Ltd)

Supply, laying and jointing of 3 Layer (out green coloured UV stablized, middle back coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R (Polypropylene random copolymer) 90mm outer dia ISI marked concealed Pipes SDR 7.4 (PN-16), UV stabilised and antimicrobial fusion welded having thermal stability for hot and cold water supply all PP-R plain and brass threaded polypropylene random with all fittings laid in trenches including taking down old unserviceable PVC/PPR Pipe complete all as specified and directed. Make : Kanha Plastics Pvt Ltd (Brand - KPT)/Supreme/SFMC (Savour Fair Manufacturing Co Pvt Ltd)

Supply, laying and jointing of 3 Layer (out green coloured UV stablized, middle back coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R (Polypropylene random copolymer) 63mm outer dia ISI marked concealed Pipes SDR 7.4 (PN-16), UV stabilised and antimicrobial fusion welded having thermal stability for hot and cold water supply all PP-R plain and brass threaded polypropylene random with all fittings laid in trenches including taking down old unserviceable PVC/PPR Pipe complete all as specified and directed. Make : Kanha Plastics Pvt Ltd (Brand - KPT)/Supreme/SFMC (Savour Fair Manufacturing Co Pvt Ltd)

Supply, laying and jointing of 3 Layer (out green coloured UV stablized, middle back coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R (Polypropylene random copolymer) 50mm outer dia ISI marked concealed Pipes SDR 7.4 (PN-16), UV stabilised and antimicrobial fusion welded having thermal stability for hot and cold water supply all PP-R plain and brass threaded polypropylene random with all fittings laid in trenches including taking down old unserviceable PVC/PPR Pipe complete all as specified and directed. Make : Kanha Plastics Pvt Ltd (Brand - KPT)/Supreme/SFMC (Savour Fair Manufacturing Co Pvt Ltd)

RAJENDER ENTERPRISES

M/S BUDHRAM BISHNOI

M/s Chopra Associates

SHREE BALAJI TRADING CORPORATION