SPECIAL REPAIRS TO VIKAS HOUSE IN VIKAS NAGAR IN RESIDENTIAL AREA AT CVRDE AVADI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises all as specified and as directed by the Engineer-in-Charge.

Cutting chases, pinning in, making good to facing where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed wiring, for grouting PVC conduit of any dia (for concealing the conduit for point/sub main wiring) etc., and making good, cutting not exc 10cm girth in brick wall all as specified and as directed by the Engineer-in-Charge.

Taking up or down 15 mm dia steel tubing and connection all as specified and as directed by the Engineer-in-Charge.

Supply and laying steel water Tubes, `medium grade', 15 mm galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and as directed by the Engineer-in-Charge.

Material and labour for backing coat 10mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces all as specified and as directed by the Engineer-in-Charge.

Material and labour for Glazed ceramic colour tiles in vertical surface 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and as directed by the Engineer-in-Charge.

Taking up or down 20mm dia steel tubing and connections, including cleaning for re-fixing or removal to store all as specified and as directed by the Engineer-in-Charge.

Supply and laying steel water Tubes, `medium grade', 20 mm galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and as directed by the Engineer-in-Charge.

M&L PVC(SWR) floor trap plain with grating including jointing with solvent cement 75mm dia all as specified and as directed by the Engineer-in-Charge.

Taking down PVC SWR pipe (any size or pattern) including all fittings all as specified and as directed by the Engineer-in-Charge.

S&F PVC SWR pipe single socketed in any length with rubber ring joints fixed to wall 75mm dia for soil waste all as specified and as directed by the Engineer-in-Charge.

M&L PVC(SWR) bends in 75mm dia any radius all as specified and as directed by the Engineer-in-Charge.

M&L Screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 all as specified and as directed by the Engineer-in-Charge.

Material and labour Non skid ceramic colour tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 and n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed by the Engineer-in-Charge.

Taking down door chowkat or frames n.exc 1.5 sqm but with shutters ( with out taking off shutters from the frame)all as specified and as directed by the Engineer-in-Charge.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening as per specification & drawing as shown in SSR part II all as specified and as directed by the Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as specified and as directed by the Engineer-in-Charge.

S&F aluminium anodised barrel tower bolts of extruded section 200mm long all as specified and as directed by the Engineer-in-Charge.

S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel and fixed all as specified and as directed by the Engineer-in-Charge.

S&F 150 mm size aluminium anodised handles, cast type all as specified and as directed by the Engineer-in-Charge.

S&F in repair vitreous china wash down water closet (pedestal pattern ) white including connecting to trap and to flushing pipe, anti syphonage pipe, trap set, including provision of lime concrete bedding and making good to floor complete all as specified and as directed by the Engineer in charge.

S&F in repair PVC valve less, symphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets all as specified and directed by the Engineer in charge.

S&F in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified.

Supply and fix in repair vitreous China wash basin, flat back, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and finning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe all as specified and as directed by the Engineer-in-Charge.

Supply and fix 32 mm waste fitting, brass, chromium plated for glazed ware WHB with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and as directed by the Engineer-in-Charge.

S&F low density 32mm polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to wall all as specified and as directed by the Engineer-in-Charge.

S&F in repair Pillar taps, cast copper alloy with capstan heads, chromium platted screwed down high pressure with or without lettered HOT or cold with long screwed snates and fly nuts, Screwed for iron pipe and fixed for 15mm bore dia(Fancy type) all as specified and as directed by the Engineer-in-Charge.

S&F in repair Bib cock fancy type CP screwed down screwed for iron pipe or for brass ferrule and fixed 15mm bore dia all as specified and as directed by the Engineer-in-Charge.

S&F in repair stop valves (angle valve)cast copper alloy screwed down high pressure with butter fly handle size 15mm dia bore(fancy type) all as specified and as directed by the Engineer-in-Charge.

S&F in repair Tubular towel rail 20mm dia D type 60cm long between flanges brass chromium plated all as specified and as directed by the Engineer-in-Charge.

S&F low density 40mm polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to wall all as specifiedall as specified and as directed by the Engineer-in-Charge.

S&F PVC connections 15mm size with PTMT nuts of length 450mm all as specified and as directed by the Engineer-in-Charge.

S&F in repair Bathroom cabinet PVC with mirror suitable for to keep the bathroom items, size 400 x 500mm, white colour all as specified and as directed by the Engineer-in-Charge. Make : PRIYAG (CAT. NO - 554) or equivalent.

Supply and fix in repairs Brass chromium plated shower rose 125mm size , with or without swivel joints, including fixing to to steel pipe or union all as specified and as directed by the Engineer-in-Charge.

Dismantling 1000 ltr capacity water tanks including discnnecting from connections all as specified and as directed by the Engineer-in-Charge.

Supply and Fixing 1000 ltrs capacity,Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and as directed by the Engineer-in-Charge.

Dismantling 500 ltr capacity water tanks including discnnecting from connections all as specified and as directed by the Engineer-in-Charge.

Supply and Fixing 500 ltrs capacity, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and as directed by the Engineer-in-Charge.

Supply and fix in repair 20mm brass ball valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule all as specified and as directed by the Engineer-in-Charge.

S&F in repair Health faucet chromium platted including flexible pipe, Screwed for iron pipe and fixed for 15mm bore dia(Fancy type) all as specified and as directed by the Engineer-in-Charge.

S&F in repair Fancy type cast copper with captain head, chromium plated, screwed down high pressure Mixer valve including three joints with L bend to steel pipes complete all as directed by Engineer in charge, screwed for 15mm dia iron pipe and all complete.Make : Hindware, Jaguar.

S&F in repair corner glass shelves 300mm with ABS brackets of Prayag Polimers India Ltd Cat No BEA-46 or equivalent make fixed in repairs all as specified and as directed by the Engineer-in-Charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Material and labour rendering 10mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and as directed by the Engineer-in-Charge.

Preparing new plastered surfaces wall surfaces and applying two coat of distember over one coat of chalk white primer over a coat of 2mm thick wall care putty all as specified and as directed by the Engineer-in-Charge.

Complete removing of existing treatment of wall and applying design coat over a base coat over 2mm thick care putty all as specified and as directed by the Engineer-in-Charge.

Dismantling steel window / ventilator n.exc 2.50 sqm. with shutters and fittings including grill all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq. m with shutters (without taking off shutters from the frame) each

S&F Aluminium grill, powder coated, 50mm x 50mm size, 6.3mm thick, weight not less than 1.93 kg / Sqm, fixed to aluminium frame with proper F chennal for aluminium window / ventilator all as specified and as directed by the Engineer-in-Charge.

S&F Anodised aluminium frame, powder coated for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. all as specified and as directed by the Engineer-in-Charge.

S&F anodised aluminium window and ventilator shutters, powder coated side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neopene packing, anodised aluminium snap beading, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 nos) suitable handle (1 no) complete all as specified and as directed by the Engineer-in-Charge.

M&L Plain, solid, straight IInd class hard wood chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and as directed by the Engineer-in-Charge.

S&F Fe 290Gde -E-165 for hold fast to fix the chawkat including packing with PCC 1:2:4, using 12.5mm aggregate on wall all as specified and as directed by the Engineer-in-Charge.

S&F Flush shutters, 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and as directed by the Engineer-in-Charge.

Dismantling boarding, any description, fixed in any position with nailsall as specified and as directed by the Engineer-in-Charge.

M&L Plywood, 12mm thick, grade BWP, type BB (No. of ply 7), fixed with screw to timber frame work all as specified and as directed by the Engineer-in-Charge.

M&L 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions all as specified and as directed by the Engineer-in-Charge.

M&L Second class hard-wood in scantlings, clean sawn, timber framed and fixed all as specified and as directed by the Engineer-in-Charge.

Preparation of new wooden Surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over one coat of pink primer all as specified and as directed by the Engineer-in-Charge.

M&L Second class hard wood plain fillets, square, rectangular or triangular in section wrought, secured with nails or breads of sectional area not exceeding 3 sq cm , complete all as specified and as directed by the Engineer-in-Charge.

S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open) shall be 30mm, all as specified and as directed by the Engineer-in-Charge.

S&F Cupboard knobs, 40mm dia, fixed with nut, screw and washer of mild steel, bright polished,all as specified and as directed by the Engineer-in-Charge.

S&F Hasp and staple, 100mm size safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, all as specified and as directed by the Engineer-in-Charge.

S&F Aluminium handles, fabricated type, anodised, 125mm size of extruded section and fixed, all as specified and as directed by the Engineer-in-Charge.

S&F Aluminium handles, fabricated type, anodised, 150mm size of extruded section and fixed, all as specified and as directed by the Engineer-in-Charge.

S&F Aluminium anodised, barrel tower bolts, 100mm long of extruded section and fixed, complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair Harrison rails, fancy type, anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc, completeall as specified and as directed by the Engineer-in-Charge.

Supply and fix sheet glass, 4.8mm thick, ordinary quality, fixing in aluminium window / cup board sliding with fixtures and size not exc 0.5 sqm in each pane all as specified and as directed by the Engineer-in-Charge.

Supply and fix sheet glass, 4.8mm thick, ordinary quality, fixing in aluminium window / cup board sliding with fixtures and size exc 0.5 sqm in each pane all as specified and as directed by the Engineer-in-Charge.

Supply and fix in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed by the Engineer-in-Charge.

S&F 250mm long aluminium anodised sliding door bolt with hasp, staple (Bolt type) and fixing clips of sheet cast or extruded section and fixing both and sliding boths of external section or cast alumnium alloy and fixed all as specified and as directed by the Engineer-in-Charge.

Preparation of old plastered surface and apply two coat of weather coat paint over existing surface all as specified and as directed by the Engineer-in-Charge.

Complete removal of existing treatment and applying two coat of distember over one coat of chalk white primer over a coat of 2mm thick wall putty all as specified and as directed by the Engineer-in-Charge.

Preparation of old wooden surface and apply two coat of Synthetic Enamel paint all as specified and as directed by the Engineer-in-Charge.

Preparation of old steel surface and apply two coat of Synthetic Enamel paint all as specified and as directed by the Engineer-in-Charge.

Preparation of old plastered surface and apply two coat of white wash on ceiling all as specified and as directed by the Engineer-in-Charge.

Preparation of old plastered surface and apply two coat of white wash on wall all as specified and as directed by the Engineer-in-Charge.

Taking down carefully point wiring of any type complete for light, fan, socket or power point with fixtures including making good disturbed surface to match the existing surface complete

Taking down main switches, distribution board, steel enclosure with MCB’s any way and rating including wooden board or from steel board and making good disturbed surfaces complete.

M&L for Point wiring with 1.5 sqmm FRLS grade PVC insulated unsheathed two single core multistranded copper conductor, 1100 V grade drawn through in and including 20 mm dia PVC conduit, ISI marked, concealed on walls and fixed on surface on columns ad slab and with 1.5 Sqmm unsheathed, stranded copper FRLS cable for continuous earth wire terminated with and including pressed modular metal concealed terminal boxes of reqd size, inner frame with outer cover suitable to accommodate modular switches/sockets/regulators all as specified & directed for the following :-

(a) One light/Fan controlled by one switch

(b) One point for socket outlet 5 amp independent board

(c) One point for socket outlet 5 amp same board

(d) One bell/buzzer point controlled by one push button on the same board with other switches or independent.

M&L for Point wiring with 2.5 sqmm FRLS grade PVC insulated unsheathed two single core multistranded copper conductor, 1100 V grade drawn through in and including 20 mm dia PVC conduit, ISI marked, concealed on walls and fixed on surface on columns ad slab and with 1.5 Sqmm unsheathed, stranded copper FRLS cable for continuous earth wire terminated with and including pressed modular metal concealed terminal boxes of reqd size, inner frame with outer cover suitable to accommodate modular switches/sockets suitable for 15 Amps switch socket outlet on independent board.

S&F modular switch piano flush type, 6 amps, 230V AC,single pole, one way

S&F modular switch piano flush type 16 amps, 230V AC single pole one way

S&F modular socket out let multipurpose suitable for 2/3 pin 6 amp flush type

S&F modular socket out let 2 in 1, 3/6 pin 6 and 16 amp flush type

S&F Modular fan step regulator, 120 W-2 module complete.

Supply and fix musical Bell AC 220 V single pole complete all as specifed and directed.

S&F ceiling rose, surface type, bakelite 65x50mm three terminal all as specifed and directed.

S&F in replacement of LED retrofit lamp 7W 230V complete all as specifed and directed.

S&F LED luminaire, 3300 lumen output suitable for grid ceiling 1'x2', with current electronic driver, recessed mounting type with all accessories and connection complete

S&F in replacement of batten 2 feet LED tube light fitting 9/10W high lumen efficiency, min 5700K and extruded aluminium/ polycarbonate/ CRCA body with suitable electronic driver, 230V with all accessories pre wired, connecting up with and including twin core twisted flexible copper cable complete inclluding taking down unserviceable FTL fitting any type any watts all as specified and directed.

S&F in replacement of batten 4 feet LED tube light fitting 18/20W high lumen efficiency, min 5700K and extruded aluminium/ polycarbonate/ CRCA body with suitable electronic driver, 230V with all accessories pre wired, connecting up with and including twin core twisted flexible copper cable complete inclluding taking down unserviceable FTL fitting any type any watts all as specified and directed.

Taking down and Over hauling of ceiling of any sweep/ make i.e. opening of fan and cleaning ball bearing, filling grease/oil and changing of unservicable cotter pin, nut, screw, check nuts and bolts as required including cleaning of body, blades, down rods, canopies etc and re-assembling complete all as directed.

Supply & fix in repair the following of exactly similar as existing in fan (Make-NBC/SKF) :-

(a) Ball bearing of ceiling fan of any size

(b) Metal bush bearing for ceiling fan

S&F (In repairs) fan condenser of following capacity :-

(a) 2.5 mfd, AC 230 V, 50 Hz

M&L re-winding of ceiling fan of any size with suitable super enamelled copper wire of suitable size, varnishing heating and insulating complete all a specified and directed.

S & F fan hook suitable for 40mm dia pipe, made out of MS flat iron of size 50 x 6mm including suitable size of nut, bolt & washer complete all as specified & directed

S&F Exhaust fan AC, 230/240 volts of size 250 mm sweep plastic body with louvers complete including taking down unservicable exhaust fan deposited into E&m store complete all as specified and directed.

S&F Electric water storage Heater (vertical type Geysers) 25 Ltrs (2 KW) BEE 5 stars, 230 volt AC single phase with and including grouting with high tensile rag bolt, nut & washer etc as directed as per site requirement and making necessary inlet/outlet water connection for Geysers to have glass lines tank, fero glass coated container PUF insulation, glass coated heating element, 8 BAR rated pressure, thermostat cut off etc. complete inculding provision of hot and cold connection pipe 15mm dia and 45 cm long complete including taking down unserviceable Geyser deposited into E&M Store all as specified and directed by Engineer-in-Charge. Make: Havells Cat No GHWAPXTWB025(rated power 2 KW) / Venus cat part No 25RX (LYRA-SMART) / RACOLD Omnis Lux Plus.

M&L (in replacement) for two single core (submain) FRLS PVC insulated cable with 4 sqmm nominal cross sectional area stranded copper conductor and one single core green FRLS PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia concealed in wall/ceiling complete

S&F(in replacement) sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket complete with one SP MCB 20 amps 240 volts complete all as specified & directed.

S&F pressed sheet metal enclosure (MCB DB), single phase and neutral with suitable Amps rated bus bar, double door type, 240 volts 8 way.

S&F MCB single pole, 240 volts, 6 to 32 amps, 'C' series, 10 KA breaking capacity & connection complete all as specifed and directed.

S&F MCB single pole & neutral 40 amp, 240 volts, 'C' series, 10 KA breaking capacity & connection complete all as specifed and directed.

S&F fix in repair Earthing complete with galvanised steel earth plate electrode 60x60cm x 6.0mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to and including using of 4 mm GI wire as earthing lead upto 7.5mtr by means of bolts, nuts, check nuts and washers of galvanised steel , connected to earthing test point, all as specified & indicated, including testing on completion including earth work and excavation in any type of soil/rock, PCC 1:3:6 type C1, earthing chamber, precast RCC slab 50mm thick in cement concrete 1:2:4 type B1 reinforced with welded steel wire febric weight hot less than 4 Kg/Sqm, funnel with GI watering pipe of 20mm bore, medium grade wire mesh and lugs, GI protection pipe of 15mm bore light grade upto 7.50 mtr long test point etc all as specified and directed.

Supply and fix in replacement of security light fitting LED lumninaire min 35W with high power capacity 3000 lumen, IP66 protection including mounting bracket of suitable dia bore GI Pipe bend to shape with clamps MS, nuts & bolts for mounting the fitting all as specified and directed.

Supply and fix in replacement 4P 63A Auto change over switch with sheet metal enlosure complete all as specifed and directed.

SRI VENKATESWARA ENTERPRISES

SathguruSaiEnterprises

k.Pandurangan