REPAIR TO SECURITY FENCING, BOUNDARY WALL, GATES AND ALLIED WORKS UNDER AGE BR-I OF GE(AF) ADM AREA AT AF STATION AGRA.

Amount

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches,pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, class designation 75(Kgf/cm2) straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.

Labour only for cleaning of vegitation, grass, sapling shrubs and trees not exc. 30 cm in girth and removing to rabish upto 50 meter away from site complete all as specified and directed.

Taking down cement plaster of any thickness on walls including racking out joints hacking for key,scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick/concrete surfaces finished even & smooth without using extra cement etc complete all as specified and directed.

M&L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @0.90 liter/10 sqm over new surfaces complete all as specified and directed.

M&L for apply two coats of cement base paint on walls over one coat of alkali resistant primer including preparation of new plastered brick/concrete surfaces complete all specified and directed.

M&L mild steel framed work with angle iron as in posts and struts in fencing including cutting tops to shape, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only MS galvanised chain link fencing including taking down existing fencing complete all as specified and directed. Note: Weight of fencing shall be decided by BOO

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire including dismantling of exsiting fencing complete all as specified and directed.

Supply only mild steel flat, round or square bars for weaving of chain link fencing conforming to Fe-410-W, Gde E-165, quality 'A' including dismantling of exsiting flat iron complete all as specified and directed.

Supply only mild steel bolts, purpose made with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 16 to 18 mm dia of neck, length of bolts exc. 5 cm but not exc. 10 cm complete all as specified and directed. Note for item No. 11 & 12: Rate for fixing shall deemed to be included in rates of Srl item No. 10 above

Dismantling post or struts (wood,steel or RCC) any section,embedded in concrete, brick work,masonry,etc, including taking out embedded portion and making good natural ground to disturbed ground complete all specified and directed.

Dismantling structural steel work including doors,gates but excluding framed truss etc. complete all specified and directed.

S&F framed work as in door or gates of angle or other section with gusset plates,rails braces, etc, complete,drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding and hanging door fittings ( exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and holdfast complete all as pecified and directed.

M&L for repair to iron door shutters/frames by easing or resecuring and adjusting of any description area exc 1.50 Sqm but n. exc 4.00 Sqm each without taking down by cutting, welding the frame/ shutter complete all as specified and directed.

M&L for welding in repairs exc 2.5cm but not exc. 5 cm in length on metal to be welded and jointed (for fixing small articles like helical spring etc) complete all as specified and directed.

M&L for plain cement concrete type C2, 1:3:6 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all specified and directed.

M&L in repair precast cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate,45mm thick louvres and jallies including all moulding set in CM 1:4 complete all as specified and directed.

M&L for two coat of synthetic enamel paint to new or previously untreated steel surface of any description, over 10cm in width or girth, not otherwise described over one coat of red oxide primer including preparation of surfaces complete all specified and directed.

M&L for mild steel round bars 10mm dia and over, cut to length,bent to shape required,including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia or securing with clips,including dismantling of exixting complete all as specified and directed.

S&F Dholpur stone 16 to18mm thick cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.50 sqm fixed with and including one number SS clamps (grade 202) of flat iron 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment with 10mm thick CM1:4 complete all specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for removing demolished material outside defence land complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in copings and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work and demolition of existing concrete complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc. 0.5 cum getting out returing filling in and ramming earth on broken rubble mixed with earth arround in layers not exceeding 25 cm thick in soft/loose soil making good complete all as specified and directed.

S&F in repair welded steel wire fabric weight not exc. 4 Kg/Sqm and welded to steel members complete all as specified and directed.

S&F in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tyring at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. as specified and directed (each line wire to be measured).

S&F in repair concertina coil 600mm dia ( in stretched position) hot dip galvanised steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips (18SWG) fixed over razor wire at points whereever coil touches the bottom of razor wire with the help of hog rings (24 SWG) as per manufacuturer instruction complete all as specified and directed.

S&F in repair fiber glass reinforced translucent corrugated sheeting 2 mm thick with two corrugation side lap fixed with coach screw and washers in roof. Wall etc. complete all as specified and directed.

M&L pre-painted galvalume aluminium zinc coated galvanised Iron based corrugated steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA in roof covering fixed with self taping screws (length & girth as fixed) including taking down existing sheet complete all as specified and directed.

M&L pre-painted galvalume aluminium zinc coated galvanised Iron based corrugated steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip covering fixed with self taping screws (length & girth as fixed) including taking down existing sheet complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12 mm thick in cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of old plaster complete all as specified and directed. Note : Making grooves(of uniform size 15 mm x 15 mm) shall be included in quoted rates.

J P CONTRACTORS AND SUPPLIERS (BID ID -3072695)

Abhi Construction (BID ID -3071612)

rohan traders (BID ID -3070550)

Sethi Brothers (BID ID -3073476)

C P Singh and Co (BID ID -3073491)

deva engineers (BID ID -3072131)

SHRI RADHAYSHYAM JHA (BID ID -3082465)