MISC REPAIR / PAINTING / POLISHING OF WOODEN AND STEEL FURNITURE WORKS AT AF STN ADAMPUR

Amount

CHAIR EASY

Rail made out of Ist class hard wood (shesham) with suitable holes for caning including applying one coats of spirit polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT complete all as per drawing and directed.

Front legs made out of 1st class hard wood (Shesham) of size and shape and applying with one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT,complete all as per drawing and directed

Rear legs made out of 1st class hard wood (Shesham) of size and shape and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and directed.

Seat frame made out of 1st class hard wood (Shesham) of section 75 mm x 40 mm of size 510 mm long in front and 480mm long in rear and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and directed.

Back frame made out of 1st class hard wood (Shesham) of section 75 mm x 40 mm of size 510 mm long in front and 480mm long in rear and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and as directed.

Arm rest of size 65 mm x 25mm x 610 mm made out of 1st class hard wood (shesham) and applying one coat of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT complete all as per drawing and directed.

Preparation of wooden surface of chair easy including cleaning with sand paper and applying one coat of spirit polish to achieve glossy finish and including minor fillings with putty as required complete.

Caning chairs easy with 2.5mm wide oval type plastic cane and bordering with 3mm wide plastic cane weaving as per godrej pattern, IN REPLACEMENT, complete as shown on drawing complete all as shown & directed.

CHAIR COMPUTER / CHAIR VISITOR / CHAIR EXECUTIVE

Seat for chair visitor/computer made from leatherite / rexine cloth, best quality as per the sample approved including U foam cushion of 3" thick 32 density , IN REPLACEMENT, as approved by GE, complete all as directed.

Back for chair visitor/computer made out of leatherite / rexine cloth, best quality as per the sample approved including U foam cushion of 2" thick 32 density as approved by GE, IN REPLACEMENT, complete all as directed.

Seat for chair executive made out of leatherite/ rexine cloth, best quality as per the sample approved including U foam cushion of 3" thick 32 density, IN REPLACEMENT, as approved by GE, complete all as directed.

Back of chair executive made out of leatherite / rexine cloth, best quality as per the sample approved including U foam cushion of 2" thick 32 density as approved by GE, IN REPLACEMENT, complete all as directed.

PVC wheel from chair executive/revolving of best quality as approved by GE, IN REPLACEMENT, complete all as specified and directed.

Hydraulic cylindrical type height adjustment lift of best quality of chair computer / chair as approved by GE, IN REPLACEMENT,complete all as directed.

CHAIR DINING

Rail made out of Ist class hard wood (Shesham) having suitable holes for caning, of size and shape and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per dawinrg and as directed.

Front legs made out of Ist class hard wood (Shesham) of size and shape and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and as directed.

Rear legs made out of Ist class hard wood (shesham) of size and shape and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, comlpete all as per drawing and as directed.

Stiffeners made of Ist class hard wood (shesham) of size and shape,IN REPLACEMENT, complete all as per drawing and as directed.

Back rest madeout of Ist class hard wood (shesham) of size and shape and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and as directed.

Preparation of wooden surface of chair dining including cleaning with sand paper and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required complete all as directed.

Canning for chairs Dining with 2 mm type plastic cane and bordering with 3mm wide plastic cane weaving as per godrej pattern, IN REPLACEMENT, complete as shown on drawing & directed.

CHAIR WRITING

Rail made out of 2nd class hard wood with suitable holes for caning as per drg IN REPLACEMENT, complete.

Front legs made of 2nd class hard wood as per drg, IN REPLACEMENT, complete.

Rear legs made of 2nd class hard wood as per drg, IN REPLACEMENT, complete.

Stiffeners made of 2nd class hard wood as per drg, IN REPLACEMENT, complete.

Arm rest made out of 2nd class hard wood as per drg, IN REPLACEMENT, complete.

Back rest made of 2nd class hard wood as per drg IN REPLACEMENT, complete.

Preparation of wooden surface of chair dining including cleaning with sand paper and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required complete all as directed by Engg-in-Charge.

Canning for chairs writing with 2 mm type plastic cane and bordering with 3mm wide plastic cane weaving as per godrej pattern, IN REPLACEMENT, complete as shown on drawing complete all as shown & directed.

BED PLYWOOD TOP

Long rails of bed plywood top made out of 1st Class hard wood (shesham) of size and shape and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing.

Removing worn out ply wood from head rest board and providing 4 mm thick 3 ply one side teak face ply wood ISI Marked, BWR of size 780 x 340 mm on both side of head rest and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required complete all as per drawing and directed.

Removing worn out ply wood from head rest board and providing 4 mm thick 3 ply one side teak face ply wood ISI Marked, BWR of size 780 x 180 mm on both side of head rest and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required complete all as per drawing and as directed.

Plywood top 12 mm thick, 7 ply type BB commercial BWR confirming to IS: 303 fixed on frame, IN REPLACEMENT, complete all as shown on drawing and directed.

Bottom rails of bed ply wood top made out of Ist Class hard wood (Shesham wood) of required shape and size and applying one coat of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and directed.

Legs of head board made out of 2nd Class hard wood (Shesham) of required shape and size including applying one coats of spirit polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and specified.

Legs of foot board made out of Ist Class hard wood of required shape and size and including applying one coats of spirit polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and specified.

Corner made out of 2nd class hard wood to strengthening long rails & legs and including applying one coats of spirit polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT, complete all as directed.

Preparation of wooden surface of bed plywood top including cleaning with sand paper and including applying one coat of spirit polish to achieve glossy finish and minor fillings with putty as required complete all as directed.

ALMIRAH LARGE STEEL WITH SHELVES

Mild steel chromium plated handle, 125 mm for Large/medium/small almirah with nuts and bolts all as per drawing, IN REPLACEMENT, complete all as directed.

Locks with best quality brass locks 6 levers with duplicate keys in steel large / medium / small almirah. all as per drg, IN REPLACEMENT, complete all as directed. MAKE: Harrison / Godrej.

Mild steel locking device with MS Rod and including applying one coat of synthetic enamel paint over a coat of red oxide primer, IN REPLACEMENT, complete all as per drg and directed.

Adjustment of existing shelves by tightening and replacing clamps of required nos complete all as directed.

Hinges of door shutters of Almirah large steel size as per existing hinge, IN REPLACEMENT, all as per drg and directed.

Legs of Almirah large steel made out of 1 mm thick MS sheet to required shape & design and including applying one coat of synthetic enamel paint over a coat of red oxide primer, IN REPLACEMENT, complete all as per drg.

Shelves made out of 1mm thick MS sheet to required shape and design and including applying spray painting one coat of synthetic enamel paint over a coat of red oxide primer, IN REPLACEMENT, complete all as per drawing.

Shutters made out of 1mm thick MS sheet to required shape and design and including applying one coat of synthetic enamel paint over a coat of red oxide primer , IN REPLACEMENT, complete all as per drawing and directed / approved by GE.

Preparing the old treated steel surface of almirah, removing of old chipped off surfaces and preparing the surface with putty and making it suitable for painting to match the existing surface and applying spray painting with one finish coat of synthetic enamel paint externally in almirah steel all as specified and directed / approved by GE

ALMIRAH MEDIUM/SMALL STEEL WITH SHELVES

Mild steel locking device with MS Rod and including applying one coat of synthetic enamel paint over a coat of red oxide primer, IN REPLACEMENT, complete all as per drg complete.

Adjustment of existing shelves by tightening and replacing clamps of required nos complete all as directed / approved by GE.

Hinges of door shutters of Almirah medium/small steel size as per existing hinge IN REPLACEMENT, complete.

Legs of Almirah steel made out of 1 mm thick MS sheet to required shape & design and including applying spray painting with one coat of synthetic enamel paint over a coat of red oxide primer, IN REPLACEMENT complete all as per drg.

Shelves made out of 1mm thick MS sheet to required shape & design and including applying spray painting one coat of synthetic enamel paint over a coat of red oxide primer, IN REPLACEMENT, complete all as per drawing.

Shutters made out of 1mm thick MS sheet to required shape & design and including applying spray painting with one coat of synthetic enamel paint over a coat of red oxide primer, IN REPLACEMENT, complete all as per drawing.

Preparing the old treated steel surface of almirah, removing of old chipped off surfaces and preparing the surface with putty and making it suitable for painting to match the existing surface and applying with spray painting with one finish coat of synthetic enamel paint externally in almirah steel all as specified and directed / approved by GE.

TABLE OFFICE CLERK STEEL MADE

Table top made out of 18/19 mm prelaminated particle board, exterior grade of shape and size as per existing top with 6 mm thick teak wood beading all around duly French polished, IN REPLACEMENT, complete all as shown in drg.

Leg made out of MS conduit pipe 25 mm dia or square pipe of 1.6 mm thickness welded to frame and including applying spray painting with one coat of synthetic enamel paint over a coat of red oxide primer, IN REPLACEMENT, complete all as per drawing.

Adjustment of drawers by denting etc. to make the same functional complete all as directed by Engineer- in- Charge

Locks of drawer with best quality brass locks 6 levers with duplicate keys, IN REPLACEMENT, complete all as directed.

Preparing the old treated steel surface of table removing of old chipped off surfaces and preparing the surface with putty and making it suitable for painting to match the existing surface and applying spray painting with one finish coat of synthetic enamel paint all as specified and directed /approved by GE.

CHARPOY GI PLYWOOD TOP/ MS TUBING

Stiffner made out of flat iron 40 x 5 mm thick (Approx 1 mtr length) parallels to short rail at equal distance and fix to long rail with nut and bolts not less than 8 mm dia including drilling holes and applyingone coat of synthetic enamel paint over a coat of red oxide primer, IN REPLACEMENT, complete as directed.

Plywood top 12 mm thick, 7 ply , BWR grade type BB with beading all round approx size 2.00 m x 1.00 m for charpoy GI pipe fixed with min four nos flat headed nut and bolts not less than 6 mm dia fixed with stiffener including drilling holes, IN REPLACEMENT,complete all as directed. MAKE: National/Natural /Assam ply and equivalent ISI) as approved by GE

CHAIR VERANDAH

Canning for chair verandah 4 mm wide plastic cane oval type, best quality, seat and back, including provision of rubber shoes to the legs, complete all as shown in drawing, IN REPLACEMENT, as directed.

Preparation of surfaces and applying one coat of synthetic enamel paint to the steel frame of chair verandah complete all as directed by Engineer-in-charge. Note:- (i) Old damaged canning shall be removed before painting. (ii) Colours of cane and paint shall be as approved by GE.

SOFA SET SEATER / 4 SEATER/ 5 SEATER

Cushion foam 21" x 22" x 4" , 32 density duly covered with tapesty cloth not less than Rs. 300.00/- per meter duly stiched with fine standard thread and providing best quality chain with rubber on one side complete IN REPLACEMENT, all as shown drawing as directed Make:- Sleepwell / Kurlon

om parkash and sons

ASHOK KUMAR MAHAJAN

RATTAN CHAND CHANDAN AND CO