Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.8 LAccepted-AOC D 89 SHASTRI NAGAR MEERUT 250004 | MEERUT | UTTAR PRADESH | 250004 | L1 | Accepted-AOC Found lowest bidder | |
| 2 | L2₹31.1 L+₹3.2 L (11.4%)Rejected-Finance 34 KAISER GANJ MANDI DIST MEERUT UP 250002 | MEERUT | UTTAR PRADESH | 250002 | L2 | Rejected-Finance 2nd lowest | |
| 3 | L3₹31.5 L+₹3.5 L (12.7%)Rejected-Finance | L3 | Rejected-Finance 3rd lowest |
Tender Value
₹46.0 L
EMD Value
₹91,920
Closing Date
23 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (North) Meerut Cantt
Office of the GE (North) Meerut Cantt
SPECIAL REPAIR OF ASSEMBLY SECTION OF BLDG NO E-197 (ERG) OF 510 ABW , PROVN OF INTERNAL PATHWAY OF INTERLOCKING TILES AT MAINKENNEL COMPLEX AND TRG AREA AT DTF OF RVC CENTRE AND COLLEGE AND PROVN OF PORTABLE FIRE PUMP FOR SWT AT FASF SOFIPUR UNDER
2024_MES_643876_1
8467/E8
Open Tender
Civil Works
Item Rate
183 days
Meerut
Class D Category a (i)
8 documents required · 8 mandatory
₹500
GE (North) Meerut Cantt
₹91,920
Yes
12 Apr 2024
23 Feb 2024
25 Mar 2024
23 Feb 2024
23 Mar 2024
9 Mar 2024
Amount
Dismantling AC sheet corrugated or semi corrugated including ridges of any description as in roof and including removal from site complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land, complete all as specified and directed.
Demolition stone slabs and tiles of any description or thickness in floors/ dado etc., laid bedded and pointed in any mortar, complete all as specified and directed.
Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified and directed.
Demolition of brick masonry built in cement mortar incl all quoins arches, pillars etc complete all as specified and directed.
S & F anodised aluminium powder coated snap grid frame work for false ceiling suspensible system of size 600mmX600mm complete all as specified and directed.
S&F fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as per manufactures instructions and as directed.
M&L for brick masonry with fly ash bricks straight or curved on plan exceeding 6m mean radius, old size bricks, built in Cement Mortar (1:6) complete all as specified and directed.
All as per item No. 9 above but except bricks complete all as specified and directed.. Note:- Serviceable bricks retrieved from Serial item No. 6 shall be used afetr cleaning of mortar etc .
S&F anodised powder coated aluminium frame for doors, windows, ventilators with one or more rebates with and including joining cleat for fixing etc complete all as specified and directed.
S&F anodised powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m with and including necessary joining cleats, glazing clips, ruber neopene packing, extruded anodised aluminium alloy fabricated type handles of size 150mm 2 Nos is each door, stainless steel hinges anodised aluminium snap beading for fixing glass panes /other filling material in panels, screws etc complete all as specified and directed. Note :- Glass panes / other filling materials in panels shall be masured and paid separately.
S&F for 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty or rubber beading or by any other means as per requirement in square not exc 0.5 sq. m in each pane complete all as specified and directed.
S&F aluminium (extruded section body) door closer hydraulically regulated, designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.
M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement,complete all as specified and directed.
M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified.
M&L for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified and directed. Note: The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required up to 3.50 Mtr height building.
M&L for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified. Note: The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required exceeding 3.5 Mtr but n.exc 7.00 Mtr height building.
Supply only TMT steel bars for reinforcement in required length and dia, complete all as specified and directed.
Supply only welded steel wire fabric, weight not exc 4kg/sqm, complete all as specified and directed.
M&L for 20-25mm thick machine cut kota stone slab as in flooring, steps of stair(treads), set with neat grey cement slurry @ 3Kg/Sqm, laid over and including 20mm thick cement and sand mortar (1:6) screed bed/bedding layer, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for machine cut kota stone slab 18-20mm thick as in skirting/dado, riser of steps, laid over and including 10mm thick backing coat in CM (1:4), set in neat grey cement slurry @ 3Kg/Sqm, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.
Taking down Chowkhats with shutters without taking of shutter from the frame of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified and directed.
Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified and as directed.
S & F 3mm thick Sheet glass ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane,complete all as specified and directed. Note:- New wooden beading / fillet required for glazing glass in wooden window will be paid for separately.
Cutting holes in brick walls exceeding half brick but not exceeding one brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4, including removal of rubbish outside MoD land, complete all as specified.
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.
M&L for three coats of white wash including preparation of new plastered wall surfaces of any description complete all as specified and directed.
M&L for preparation of new plastered surfaces and apply two coat of oil bound distemper over a coat of primer & chalk whitening & smoothening of surface, complete all as specified and directed.
M &L for preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified and directed.
M&L for preparation of old painted wooden surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of old painted steel or iron surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash, complete all as specified and directed.
M&L for preparation of old surfaces of ceiling including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash, complete all as specified and directed.
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc.; rubbing down and stopping of surfaces using sand paper and applying one coat of oil bound distemper, complete all as specified and directed .
M&L for complete removal of existing treatment ( from plastered / pointed surface) of wall by mechanically means of surfaces & levelling/ edging the disturbed places/ edges using necessary filling compound of Birla/ JK wall care putty to obtain smooth regular/ even finish using sand paper and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed
M&L for omplete removal of existing treatment and preparation of old plastered surfaces by applying wall care putty averaging thickness 2mm and rubbing with sand paper for making smooth surface and applying two coat of exterior emulsion paint over one coat of primer through roller, complete all as specified and directed .
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.
Removing excavated materials exceeding 1.5 Km not exceeding 5 Km and depositing where directed at a level not exceeding 1.5 metre above the starting point in soils, complete all as specified and directed.
M&L for PCC (1:4:8), type D-2, using 40 mm graded mechanically crushed stone aggregates as in foundations, filling, sub base and mass concrete, complete all as specified and directed.
M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade confirming to IS 15658-2006 with approved colour, design & pattern as in foot parth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in coping, bed block, kneels, apex stones etc including weathering slightly rounded or chamfered including form work complete all as specified and directed.
Supply, Fixing,Fabrication, Testing & Commissioning of Diesel Engine driven Fire Pump mounted on movable trolley consisting of following: Horizontally mounted, split casing, Centrifugal fire pump complete for delivery of 500LPM and head 70M complete with necessary strainers, pressure gauge. The pump shall be provided with gland packed. The impeller shall be enclosed type and accurately balanced dynamically. The pump casing and impeller shall be of CI and shaft shall be of stainless steel. Water cooled Diesel engine developing suitable BHP at 1500RPM for the above pump set with manual push button/key starting mechanism including engine starting panel, lead acid batteries of 24 V, 100 AH battery with charger unit, Diesel tank not less than 10Ltr complete with inlet and outlet connections of suction 80mm and delivery 65mm, fuel filter, fuel lift pump, oil indication gauge, exhaust silencer, exhaust system of suitable dia. class `C' M.S. pipe including 50mm thick rock wool insulation and cladded with 22 gauge aluminium Sheet in an approved manner, fly wheel, air intake manifold, air cleaner, radiator, radiator fan, lub. oil , filter, cooling water,opening with bal valve for priming purpose and all other accessories required to complete the system. The diesel engine shall be rated for continuous duty and shall have BHP rating necessary to drive the pump at 150% of it's rated discharge at 65% of rated head.Entire DD Pump shall be mounted on comman base plate made of MS of suitable thickness and mounted properly with anti vibration pad ,foundation bolt clamp etc all as directed by Engineer-in-Charge. Note:- Quoted rate shall also include 80mm pvc suction hose(5 meter) with suitable foot valve.All the above arrangement( Diesel engine and pump) shall be mounted on movable trolley made of MS rectangular chanel thickness not less than 4.2mm and wheel including tyre 8'' and pulling arrangement to move the system at desired place.Quoated rate shall also include first fill up/top up of engine oil,coolant,gear oil any other consumable required for the commissioning.
Supply, laying & jointing of ISI marked Mild Steel pipes heavy class (class C) including all fittings i.e. reducer, elbows, tees, flanges etc. by welding, providing two coat of red oxide primer and two coat of enamel paint complete all as specified and directed by engineer-in-charge. 80mm nominal bore
Supply & installation of ISI marked single headed 63 mm dia. gun metal Hydrant Valve, flanged inlet with 63 mm female instantaneous outlet confirming to IS : 5290 on the fire pump outlet including making 80 NB pipe connection with outlet valves in proper positions, including supply of nuts, bolts, gaskets, caps, chains etc. testing the hydrant and completing the work in all respect all as specified and directed by Engineer-in-Charge.
Material and Labour for ISI marked RRL (IS : 636 type-II) fire hose pipe 15 meter long and 63 mm dia with ISI marked (IS : 903) gun metal male and female coupling complete as required all as specified and directed by Engineer-in-Charge.
Supplying and fixing gun metal ISI marked 63 MM. dia. Instantaneous pattern short branch pipes & 12.5 mm dia. Nozzle suitable for inter connections to hose pipe coupling as required complete all as specified and directed by Engineer-in-Charge.
Manglam Engineers and Construction Co
High Tech Metal India
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .