REPAIR TO DRAIN, FOOTPATH, HARDSTANDING, COMPOUND WALL, FENCING, GATES AND RETAINING WALL ETC UNDER ZONE REPAIR TO DRAIN, FOOTPATH, HARDSTANDING, COMPOUND WALL, FENCING, GATES AND RETAINING WALL ETC UNDER ZONE I OF GE BRICHGUNJ, SVP

Amount

Dismantling, posts or struts(wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground etc complete all as directed.

Excavation in post holes in hard/dense soil each n.exc 0.5 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm thick, watering and removing surplus soil to a distance n.exc 50m and making good surface etc complete all as directed

M&L for PCC 1:3:6 type C2 (using 40 mm graded aggregate) as in foundations, filling and mass concrete complete all as directed.

S&F MS angle/flat iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wiremesh) including all necessary drilling, welding, bolting or riveting and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed.

S&F in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as directed. (each line wire measured)

Dismantling of fencing wiremesh of any size and description etc complete all as directed.

Supply only PVC coated (1mm thick) chain link fencing exc 2.00 but n.exc 3.50 kg per sqm with size of mesh 50x50 mm and thickness of wire n.exc 2.83 mm all as specified and as directed. (Gross weight shall be taken for payment purpose)

Fixing only PVC coated chain link fencing including fixing of line wires any mesh, size and any type of standards, rails, straining bolts etc including provision of binding wires complete.(Supply of MS line wire and flat iron bolt & nuts measured and paid seperately) all as specified and as directed.

Supply only 6mm dia GI wire PVC coated for support/line wire to chain link fencing complete all as specified and as directed.

S&F only mild steel bolts with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm long n.exc 10 cm long dia metre of neck exceeding 11 to 15 mm complete all as specified and as directed.

Demolition of Precast Concrete Block masonary work built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:4) all as specified.

All as per item No. 12 above but except block

M&L cement concrete in surface channels and drains type C2 1:3:6 (40 mm graded aggregate) all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete all as specified and as directed.

Taking down cement plaster of any description from wall/ceiling including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work/ block masonry or concrete surfaces finished even and fair etc complete all directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work/ block masonry or concrete surfaces finished even and fair etc complete all directed.

M&L PCC 1:2:4 type B1 (using 20 mm graded aggregate) as in coping/benching complete all as specified and as directed.

M&L for Two coat of weather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer on newly plastered wall surfaces including preperation of surfaces all as specified and directed.

M&L for Two coat of weather proof exterior acrylic emulsion paint with anti fungal property on old painted wall surfaces including preparation of surfaces all as specified and directed.

Dismantling structural steel work including door, gates but excluding framed truss etc

S&F framed work as in door or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete etc confirming to Fe 410-W(Gde-E-250) quality-A all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided ford etc complete all as specirfied.

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement etc including dismantling existing SS railing complete all as specified and designed as directed by Engineer in charge

M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth, not otherwise described and applying two coat of Epoxy anti-corrosive paint etc complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and any position not otherwise specifically provided for etc complete all as directed.

M&L precast RCC (1:2:4) type B1 (20 mm graded crushed stone aggregate) as in cover slabs and similar articles with plain faces set in CM (1:4) complete all as directed.

M&L RCC (1:2:4) type B1 using 20mm graded crushed stone aggregate as in slab complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surfaces complete all as directed.

M&L for providing TMT bars 10mm dia and over, cut to lenth, bent to shape required, including cracking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 3.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, peir holes etc getting out in soft/loose soil etc complete all as specified.

M&L PCC (1:4:8) Type D-2 (using 40mm graded aggregate) as in foundation, filling, mass concrete etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated soil to a distance n.exc 50 m and depositing complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed.

M&L 75 mm thick cement concrete type D2, 1:4:8 (using 20 mm graded stone aggregate) as in sub base etc complete all as specified and as directed.

M&L 40 mm thick PCC (1:2:4) type B-1 (using 20 mm graded aggregate) as in floor finishing surface even and smooth using extra cement complete all as directed.

Dismantling floor, hearth or wall tiles, interlocking tiles including cement mortar bedding(but not backing) and removing serviceable tiles to stores and rubbish off the premises.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed with neat cement slurry including screed bed of 15mm thick in CM (1:4) etc complete all as directed.

M&L for Endura Heavy duty Vitrified tiles of size 300x300x10 to 12mm thick or high dimension (except thickness) of any colour any design durastone weather proof impact resistant abrasion resistant exterior tiles as in floors etc set and jointed in neat cement slurry over and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 etc complete all as specified and as directed. Make : Johnson/Somany/Orient Bell

M&L for providing cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating etc including dismantling existing kerb stone and removing rubbish off the premises. complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with CM 1:3, including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete.

M&L for preparation of newly brick, stone, kerb stones or concrete surfaces of any description over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint etc complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Hindustan Traders (BID ID -3476688)

Nirman Construction Company (BID ID -3476887)

RS ENGINEERING WORK (BID ID -3476979)

Sri Ram Construction (BID ID -3476891)