Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.3 LAccepted-AOC | L1 | Accepted-AOC DUE TO LOWEST BID | |
| 2 | L2₹24.4 L+₹6.4 L (35.8%)Rejected-Finance | L2 | Rejected-Finance DUE TO HIGHER BID |
Tender Value
₹29 L
EMD Value
₹58,000
Closing Date
12 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (WEST) FEROZEPUR CANTT
GE (WEST) FEROZEPUR CANTT
WELCOME MAINT TO OFFICER MD ACCN P 04 P 05 AND P 06 UNDER AGE B R I OF GE (WEST) FEROZEPUR CANTT
2023_MES_591053_1
802023/GE-10/E8
Open Tender
Civil Works
Item Rate
180 days
FEROZEPUR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (WEST) FEROZEPUR CANTT
₹58,000
Yes
1 Jul 2023
16 May 2023
14 Jun 2023
16 May 2023
12 Jun 2023
30 May 2023
Amount
M&L preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices complete all as specified and directed.
M&L preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling complete all as specified and directed.
M&L washing rubbing down and stopping of distempered and painted wall surfaces and applying one coat of oil bound distemper complete all as specified and directed.
M&L complete removal of existing treatment of wall suface and applying two coats of oil bound distemper over a coat of primer on a coat of 1mm thick wall care putty complete all as specified and as directed.
M&L washing rubbing down and stopping of distempered and painted surfaces including preparation of old surfaces and applying one coat of cement based paint on wall surfaces including proper curing complete all as specified and directed.
M&L complete removal of existing treatment of walls applying two coats of cement based paint over one coat of cement primer on plastered surfaces complete all as specified and directed.
M&L complete removal of existing treatment on wall/ceiling surfaces, including cornices, pilasters, etc, by scrapping down with wire brushes and removing existing loose finishes, paricles, apply after finishing wall surface with wall care putty to get fair finish on that two coats of acylic (100%) exterior emulsion paint over a coat of external cement primer complete all as specified and directed. Make (wall care putty): Birla wall care putty/JK wall care putty Make (acylic (100%) exterior emulsion paint): Asian paints (Apex Ultima)/Berger paints (weather coat all guard)/Jenson & Nicholson (safe guard) Note: Necessary form work/scaffolding all are included in the above quotated rate.
M&L preparation of old decorated wood or wooden based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L preparation of old decorative steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L complete removal of existing treatment on terra- cotta floor surfaces like a pathway pavers , chequered, inlerlocking tile, roof tiles surfaces etc including necessary preparation of surfaces and applying two coats of terra-cotta over a coat of primer complete all as specified and directed.
M&L applying 2mm thick wall care putty interior/exterior on wall surfaces finished smooth and even complete all as specified and directed.
M&L preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint on steel surfaces complete all as specified and directed.
M&L preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.
M&L non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.06 sqm but not exceeding 0.11Sqm in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over and including a screed layer of 15mm thick in cement mortar 1:6 complete all as specified and directed.
M&L non skid coloured ceramic tiles of 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over and including a screed layer of 15mm thick in cement mortar 1:6 complete all as specified and directed.
M&L non skid coloured ceramic tiles of 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18Sqm as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with 10mm thick in cement mortar 1:4 complete all as specified and directed.
M&L glazed coloured and cereamic tiles in vertical surfaces 350mm X 250mm or 450mm X 350mm and 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces complete all as specified and directed.
M&L Vitrified ceramic tiles 10mm thick (Square/rectangular) polished area of each tiles exceeding 0.36Sqm and not exceeding 0.42Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade) cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L light shade Vitrified tile 10mm thick polished, area of tile not exceeding 0.36 sqm as in skirting set and jointed in cement slurry over and including 10mm thick screed in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. Note:- Sand will be measured and paid seperately
M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade including laying of sand cushioning, etc, complete all as specified and as directed. Note:- Sand will be measured and paid for seperately
M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in filling of steel chowkhats,bed blocks, coping etc including necessary formwork complete all as specified.
Demolition of cement concrete in sunken portion any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L 15mm thick cement mortar 1:3 with WPC on walls as well as on sunken floor portion finished even and smooth using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid for separately.
Supply only water proofing compound.
M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.
M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gm/sqm) land on primed surface by forced application complete all as specified and directed.
M&L PCC 1:5:10 type E-2 (using 40 mm graded aggrigate ) as in filling under sunken portion complete all as specified and directed.
M&L 25mm thick PCC 1:2:4 type B1 (using 20 mm graded aggregate) as in floor finished even and rough to receive top layer ccomplete all as specified and directed.
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified and directed.
M&L for cutting holes in brick wall built in cement mortar for fixing hold fasts and making good dismantled portion in cement mortar1:3 or in cement concrete 1:2:4 type B-1, depth of embedded portion of hold fasts measured from the face of jamb into wall exceeding half brick but not exceeding one brick complete all as specified and directed.
All as per ser item No 31 here-in-before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each.
Taking down shutters of any description and refixing in the same opening exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed.
S&F factory made pressed steel frames made of 1.25mm thick MS sheet of profile 105mmx60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.
All as per ser item no 35 above here-in-before but size 125mmx60mm with double rebate.
S&F factory made Solid PVC door frame of size 50mm x 47mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed. Make: Rajshri or equivalent in approved Makes.
S&F factory made 35mm thick second class hard wood plain framed panelled shutters (any number of panels ), with panels of timber flat on both sides (feather edge), or of veneered particle board medium density wood wood particle board with commericial face veneers and fitted to chowkats complete all as specified and directed.
S&F factory made 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze, etc (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and directed.
Demolition of boarding of any description and in any position complete all as specified and directed.
S&F 14-16mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessaries as in shelves with rebates fixed on PVC solid pattern of size 40mmx18mmx500mm on tree sides complete all as specified and directed. Make: Rajshree or equivalent in approved Makes.
S&F 16-18 mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessaries as in shutters complete all as specified and directed. Make: Rajshree or equivalent in approved Makes.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
S&F in repair to 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares not exceeding 0.50 Sqm including hacking out old broken glass and putty/beading complete all as specified and directed.
S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F PTMT tower bolts, 200mm long and fixed with steel screws complete all as specified and directed.
S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.
S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.
S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed.
S&F 150mm long aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed.
S&F 150mm Extruded aluminium alloy handle complete all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolt 300mm length, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F butt hinges 100mm size exturded Aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B21 complete all as specified and directed.
S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.
S&F 4 lever aluminium mortice lock,vertical type size 100 mm complete all as specified and directed.
S&F hydraulically extruded aluminium body door closer regulated designation No 3 universal type suitable for door shutters of 851mm to 1000mm in width and weight between 61 to 80 Kg etc complete all as speciified and directed.
S&F Continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws complete all as specified and as directed.
Taking down cement plaster inlcuding racking out joints, hacking for keys, scrubing down with water, complete all as specified and directed.
M&L 10 mm thick rendering in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth with out using extra cement complete all as specified and directed.
M&L Rendering 15 mm thick in cement mortar 1:4 on any face of brick walls or conrete surfaces, surfaces finished fair and even complete all as specified & directred.
M&L Rendering 5mm thick in cement mortar 1:3 on any face of brick walls or conrete surfaces, surfaces finished even and smooth without using extra cement, in ceiling, soffits of chajja or similar location etc complete all as specified & directred.
S&F galvanised steel water tubes 15 mm dia bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed.
S&F galvanised steel water tubes 20 mm dia bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed.
Taking up or down 15 mm dia bore existing steel tubing and connections and Re fixing old steel tubing and connections in new or old position to walls and ceiling or laid in floors including cleaning the steel tubing complete all as specified and directed.
All as per ser item No. 65 here-in-before but 20mm dia.
S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed.
S&F 15mm dia bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) fixed in repairs complete all as specified and directed.
S&F 15mm dia bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, fixed in repairs complete all as specified and directed.
S&F 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union, fixed in repairs complete all as specified and directed.
S&F PVC connection both end brass union and length 450 mm long suitable for 15 mm dia bore pipe complete all as specified and directed.
S&F 15mm dia bore CP Bib tap, fency type screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F 15mm dia bore fancy type pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, as in repair complete all as specified and directed.
S&F in repair to CP WHB mixer 15mm bore without popup waste system with 450mm long braided hoses complete all as specified and directed. Makes: CQT-23167Bof Jaquar or techno-commercially equivalent in approved makes
S&F hot and cold wall mixer Non Telephonic /Non Over head shower type arrangement with connecting legs and wall flanges as fixed in repairs and complete all as specified and directed. Makes:-Jaquar Cat No: FLR-5219 N or CERA Cat No:F2004405 or techno-commercially equivalent in approved makes
S&F hot and cold wall mixer with over head shower type arrangement including bend pipe for over head shower with connecting legs and wall flanges as fixed in repairs complete all as specified and directed. Makes:-Jaquar Cat No: FLR-5217 N or CERA Cat No:F2004401 or techno-commercially equivalent in approved makes
S&F chromium plated fancy type15mm bore dia hot and cold wall mixer with provision forover head with 115mm long bend pipe one upper side connecting legs and wall flanges all as specified and directed. Makes: Jaquar Cat No FLR 5219 N or techno-commercially equivalent in approved makes
S&F 6 mm thick , 5 ply, plywood , grade BWR , type BB fixed to steel frame/wooden frame work with nails, complete all as specified and directed.
S&F aluminium anodised 20mm dia towel rail of 60cm long fixed with brackets at its ends as fixed in repairs complete all as specified and directed.
S&F CP Soapdish Oval /squaretype as fixed in repairs complete all as specified and directed.
S&F CP Toilet Paper Holder with Flap as fixed in repairs complete all as specified and directed.
S&F in repairs steel sink with dranage board made out of 1mm thick stainless steel sheet in kitchen or laboratory with plug washers and waste fittings including bedding in cement mortar on dwarf wall, including fixing cantilever brackets and connecting unions to pipe overall size of sink 915mmx460mm and bowl size 410mmx330mmx160mm complete all as specified and directed.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F Corner glass shelves 225mm radious, 6mm thick as per sample radious for bath room, fixed on suitable support complete all as specified and directed.
S&F PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs. as fixed in repairs and complete all as specified and directed.
S&F replacement of pressure JET for EWC including PVC connection and CP fitting as fixed in repairs and complete all as specified and directed.
S&F in repair to CP towel ring square complete all as specified and directed.
S&F Health faucet (ABS Body) with 8mm dia 1.00 m long easy flexible tube chormium coated finish and wall hook complete all as specified and directed. Makes: Jaquar model No: ALD-CHR-585 or techno-commercially equivalent in approved makes.
S&F vitreous china wash hand basin size 550mm x 400mm (pedestal pattern) including necessary fittings to fixed with wall complete set and brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed
S&F Rotational moulded triple layered Polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and directed.
S&F Rotational triple layered moulded Polyethylene water storage tank of 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and directed.
S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary cement concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed.
S&F Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified and directed.
S&F Seat Cover (Whitecolour) for pedestal pattern as fixed in repairs complete all as specified and directed.
S&F 1.00mm thick stainless steel plate racks of size 750mmX600mmX250mm complete all as specified and directed.
S&F vitreous China WHB white flat back size of 550mm X 400mm excluding taps waste chain and plug and porcelien stopper but including brakets 32mm dia waste pipe as fixed in repairs complete all as specifed and directed. Makes: Parryware/Cera or equivalent in approved makes
S&F 20mm dia mild steel PVC colour powder coated curtain rod with fancy type brackets including with all fittings as fixed in repairs complete all as specified and directed.
Taking down eaves gutters and rain water pipes( any size or pattern), including all fittings heads shoes bends swan-necks etc complete all as specified and directed
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 110mm dia PVC (SWR)with access door bends any radius complete all as specified and directed.
S&F 75mm dia PVC (SWR) with access door bends any radius complete all as specified and directed.
S&F PVC (SWR) 75 mm floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F 20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.
Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
S&F in repair to Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed.
Dismantling of steel work including doors ,gates but excluding framed truss etc complete all as specified and directed.
S&F mild steel Fe 410 -W(Gde E-250 quality B Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.
Dismantling plain or corrugated AC sheet/fibre sheet on roof covering complete all as specified and directed.
M&L Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L Cleaning and removing all scale and dirt, etc., from tanks of capacity exceeding 250 Litres but not exceeding 500 litres, including writing letters as cleaned on Month and year by using synthetic enamel paint (height of each letter not less than 5 cm) as affected, including disconnecting existing tank setting aside (or lowering if required ) for repairs,cleaning etc and hoisting if required reconnecting and refixing in position complete all as specified and directed.
M&L Cleaning and removing all scale and dirt, etc., from tanks of capacity exceeding 500 Litres but not exceeding 1000 litres, including writing letters as cleaned on month and year by using synthetic enamel paint (height of each letter not less than 5 cm) as affected, including disconnecting existing tank setting aside (or lowering if required ) for repairs,cleaning etc and hoisting if required reconnecting and refixing in position complete all as specified and directed.
M&L brushing neat cement slurry with 3 kg of cement per square metre complete all as specified and directed.
M&L for PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in kerbs, mud stop, rounded or chamfered on edges including necessary formwork complete all as specified and directed.
Easing of wooden window shutters/CB Shutters (One Unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolts including necessary nail and screws etc complete all as specified and directed.
Easing of wooden door shutters (One Unit shall comprise of one Panelled or Skeleton door shutter irrespective fo number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolts including necessary nail and screws etc complete all as specified and directed.
M&L welding in repairs exceeding 6mm but not exceeding 9 mm in length, thickness of metal to be welded complete all as specified and directed.
S&F spindle for 15mm dia as per existing for CP brass fancy Bib Cock as fixed in repairs complete all as specified and directed.
S&F spindle for 15mm dia as per existing for CP fancy brass Piller Cock as fixed in repairs complete all as specified and directed.
S&F CP Handle for Bib tap as fixed in repairs complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc to match with the existing specifications complete all as specified and directed.
M&L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC conealed conduit, with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.
(b) One socket outlet on the same board controlled by one single pole one way switch
(c) One 5 Amps socket outlet independent controlled by one single pole 5 Amp switch.
All as per ser Item No 125 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete all as specified and directed.
All as per ser item No 125 here-in-before but existing conduit and existing MS pressed steel/ cast iron box complete all as speicifed and directed. (a) One light point/fan/bell point controlled by one single pole one way switch.
(c) One 5 Amps socket outlet independent controlled by one single pole 5 Amp switch.
All as per ser item No. 128 here-in- before but existing conduit and existing MS pressed steel/ cast iton box complete all as speicifed and directed.
S&F Switch piano flush type single pole one way 5/6 Amp complete all as directed.
S&F Switch piano flush type 15 Amps, single pole one way duly ISI marked complete all as specified and directed.
S&F Socket outlet 2 in one, 5/6 Amps flush type ISI marked complete all as specified and directed.
S&F Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked complete all as specified and directed.
S&F Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65mm x 50mm, 3 terminals ISI marked complete all as specified and directed.
S&F Lamp holder insulated body threaded dome pattern,suitable for bracket / batten fitting complete all as specified and directed.
S&F stepped type electronic fan regulater flush, socket type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed.
S&F bell push piano flush type 5 Amps single pole duly ISI marked complete all as specified and directed.
S&F bell ding dong AC 230 Volts single pole complete all as specified and directed
S&F in replacement of existing Modular Bell push 6A, 1 module complete all as per specified and directed. .
S&F in replacement of existing Modular Switch one way 6 Amp, 1 module complete all as per specified and directed.
S&F in replacement of existing Modular Switch one way 16 Amp, 1 module complete all as per specified and directed.
S&F in replacement of existing Modular Socket 6Amp - 2/3 pin combined 2 module complete all as per specified and directed.
S&F in replacement of existing Modular Socket 6Amp/16Aam - 2/3 pin combined 2 module complete all as per specified and directed.
S&F in replacement of existing Modular white cover plate with frame, 1 module complete all as per specified and directed.
S&F in replacement of existing Modular white cover plate with frame, 2 module complete all as per specified and directed.
S&F in replacement of existing Modular white cover plate with frame, 3 module complete all as per specified and directed.
S&F in replacement of existing Modular white cover plate with frame, 4 modulecomplete all as per specified and directed.
S&F in replacement of existing Modular white cover plate with frame, 6 module complete all as per specified and directed.
S&F in replacement of existing Modular white cover plate with frame, 8 module complete all as per specified and directed.
S&F in replacement of existing Modular step type regulator,120 Watt - 1/2 module complete all as per specified and directed.
S&F LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with and including three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F in repair LED tube light fitting 9 Watt batten type fixed on wall/ ceiling etc. including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S&F LED luminaire 600 mm x 600 mm, 35/36 Watt, 220 Volt AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
S&F in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.
S&F LED Bulliding Security light fitting 35 Watt 230 Volt AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
S&F in repair sheet metal enclouser SPN DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed
All as per item No 158 here-in-before above but SPN DB's 4 way.
S&F in repair sheet metal enclouser DB's TPN 4 way double door(Vertical Type) factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 415 Volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed
S&F MCCB 63 Amps, 415 Volts, 16KA breaking capacity complete all as specified and directed.
S&F MCB TPN 415 Volts, 63 Amps, 10 KA breaking capacity complete all as specified and directed.
S&F MCB single pole neutral (SPN) 240 Volts, 40 Amps, 10 KA complete all as specified and directed.
S&F MCB single pole (SP) 240 Volts, 6 to 32 Amps, 10 KA complete all as specified and directed.
S&F in repair sub main wiring of 6 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 6.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia complete all as specified and directed. Note:-Two run of single core 6.0 sqmm cable and one run single core 6.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).
VK ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .