REPAIR OF PAVEMENT RUNWAY MARKING JOINT FILLING AND MISC WORKS AT DET RAMPURHAT UNDER AIR FORCE STATION ARJAN SINGH

Amount

Material and labour for preparation of previously treated surface to receive painting and applying water based road marking paint as in painting lines, dashes, arrows letters etc on roads pavement and the like exceeding 10 cm width with white, black or golden yellow colour till standout boldly and solidly without showing brush marks complete all as specified and as directed by Engr-in-Charge.

Raking out old sealing compound from the old existing joints of size 16-20 mm wide and 15mm deep (average) without disturbing the joint filler underneath including cleaning the joints portion throughly to ensure dust free using compressed air by air blower, and filling the existing joints with sealing compond grade 'B' after applying a coat of primer to vertical surfaces of concrete which are in the contract with the compound and finishing the joint properly leaving 3 mm gap from top surface of concrete complete all as specified and as directed by Engr-in-Charge.

Raking out old sealing compound from the old existing joints of size 10-15 mm wide and 15mm deep (average) without disturbing the joint filler underneath including cleaning the joints portion throughly to ensure dust free using compressed air by air blower, and filling the existing joints with sealing compond grade 'B' after applying a coat of primer to vertical surfaces of concrete which are in the contract with the compound and finishing the joint properly leaving 3 mm gap from top surface of concrete complete all as specified and as directed by Engr-in-Charge.

Making good cracks in slabs (exposed rigid pavement) by cutting 'V' grooves 25 mm wide at top and 40 mm deep and cutting spalled joints sides perpendicular and parallel to edge by mechanical tools as specified, cleaning with compressed air and washing with chemical water solution under pressure and filling with epoxy resin mortar after application of specified primer and removal of rubbish to distance exceeding 250 m and not exceeding 500 m and depositing complete all as specified and as directed.(Make Huntsman/Sikador 32)

Repair to broken spalled edges of joints, tiny pot holes etc of existing concrete slab by cutting/forming square/recangular form to a depth not exceeding.25mm with Mach cutter wider towards bottom to from key with the existing quality concrete, cleaning / dusting the cutted area using compressed air to remove all dust and dirt by air blower and repairing with with epoxy resin mortar after application of specified primer and removal of rubbish to distance exceeding 250 m and not exceeding 500 m and depositing complete all as specified and as directed.(Make Huntsman/Sikador 32)

Repair to broken spalled edges of joints, tiny pot holes etc of existing concrete slab by cutting/forming square/recangular form to a depth exc.25mm but not exceeding 50mm with Mach cutter wider towards bottom to from key with the existing quality concrete, cleaning / dusting the cutted area using compressed air to remove all dust and dirt by air blower and repairing with with epoxy resin mortar after application of specified primer and removal of rubbish to distance exceeding 250m and not exceeding 500 m and depositing complete all as specified and as directed.(Make Huntsman/Sikador 32)

Mechanized cleaning of vegetation, grass and bush around the Runway / Taxi Track and links roads of runway within Rampurhat Det, by providing 01 No bust cutter (four stroke and not less than 1.0KW engine power and two blade cutter type) except Sundays and Holidays (incl 01 No operator necessary fuel oil, lubricant and including removal of materials obtained from cutting & cleaning. NOTE (i) When the running hour is not full hour or multiple of a hour but involve fraction of an hour, then payment payable for that fraction shall be proportional to the quarter hour involved. (ii) Daily log sheet / book to be maintained.

ROY ENTERPRISE

SUPARNA TRADING

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

M/s. Kalpana Construction

UNIQUE ENTERPRISE

M/S Konar Engineering

M/S Ali Trading Co

SATIMATA ENTERPRISE

NATIONAL CONSTRUCTION CO

M/S FM Enterprise