A R and M O AE Residence Building at Chirgaon Tehsil Chirgaon Distt Shimla H P SH Boundary wall WS and SI etc

Providing and placing on terrance (at all floor levels) polyethyene water storage tank, IS :12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overfloe pipes but without fittings and the base support for tank complete including carriage of meterail in all leads and lifts as per direction of the Engineer in Charge .It 2000 capacity one Nos.

P/L Hings including all leads and lifts asper direction of the Engineer in Charge

P/L Hands including all leads and lifts asper direction of the Engineer in Charge

P/L Roller including all leads and lifts asper direction of the Engineer in Charge

P/L G.I Pipe including all leads and lifts asper direction of the Engineer in Charge

Half brick masonry with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure in : Cement moetar 1:4 (1 cement :4 course sand ) complete including all leads and lifts asper direction of the Engineer in Charge

Stone soling properly hand -packed filling interstices with spalls and consolidating with power road roller to the requested gradient and comber including spreading watering and rolling of binding materials moorum or earth. including all leads and lifts asper direction of the Engineer in Charge

Providing and laying concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802,803,1202 and1203.(1:3:4)

15mm cement plaster in single coat on the rough/fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and or rounded angles not exceeding 30cm in grith and finished even and sand apaoered smooth in cement mortar 1:6 including all leads and lifts asper direction of the Engineer in Charge

P/F Spray plaster in wall in cement mortar 1:6 including all leads and lifts asper direction of the Engineer in Charge

Providing and fixing ISI marked high pressure PVC (finolex) of working pressure not less than 4.5 kg /sqm, waste and ventiating pipes including fixing with approved adhesive etc. including all leads and lifts asper direction of the Engineer in Charge

Providing and fixing PVC (finolex) plain bend marked including fixing with approved adhesive etc, complete including carriage of materials within all leads and lifts, 110 mm dia

Providing and fixing PVC (finolex) collars ISI marked including fixing with approved adhesive etc, complete including carriage of materials within all leads and lifts, 110 mm dia