REPAIRS TO JOINERY,PLUMBING, ROOFING, PLASTERING AND CERTAIN B/R REPAIR WORKS AT ASHWINI NAGAR,JAYANT PARK, INHS DHANVANTARI, HQ 34 WEU AND CERTAIN OTM ACCN UNDER AGE B/R I AT GE MINNIEBAY, PORT BLAIR

Amount

Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & grill (if fixed) without taking off shutters from the frame) including fittings complete all as specified and as directed by Engr-in-Charge

Taking down chowkats or frames exc 1.5 Sqm and not exceeding 4 Sqm (with shutters and grill (if fixed) without taking off shutters from the frame) including fittings complete all as specified and as directed by Engr-in-Charge

Taking down shutters of any description n. exc. 1 Sqm including fittings complete all as specified and as directed by Engr-in-Charge

Resecuring or easing & adjusting wooden shutters of any description exc 1 sqm and n exc 2 sqm each without taking down from chowkats complete all as specified and as directed by Engr-in-Charge.

S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm rudraksh colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification complete all as specified and as directed by Engr-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of rudraksh colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and as directed by Engr-in-Charge

M&L for Anodised aluminium frame for doors, windows, ventilators and partition with one or more rebates including joining cleat for fixing etc complete all as specified and as directed by Engr-in-Charge

S&F anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and as+ directed by Engr-in-Charge

S & F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S & F 4 mm Plain sheet glass ordinary quality, in square not exc 0.5 sqm each complete all as specified and as directed by Engr-in-Charge.

S & F 4 mm Plain sheet glass ordinary quality, in square exc 0.5 sqm each complete all as specified and as directed by Engr-in-Charge.

S&F in 12mm thick prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination fixed as in panels of aluminium door shutters, partition etc complete all as specified and as directed by Engr-in-Charge

S & F in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engr-in-Charge

S & F in repairs figured glass 4 mm, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed by Engr-in-Charge

S & F second class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed by Engr-in-Charge

S & F second class hard wood factory made 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engr-in-Charge

S & F second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and as directed by Engr-in-Charge

S & F 100mm length Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 including srews complete all as specified and as directed by Engr-in-Charge

S & F 150mm length Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 including srews complete all as specified and as directed by Engr-in-Charge

S&F extruded aluminium alloy handle fabricated type anodised 100mm long complete all as specified and as directed by Engr-in-Charge.

S&F extruded aluminium alloy handle fabricated type anodised 150mm long complete all as specified and as directed by Engr-in-Charge.

S&F aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and as directed by Engr-in-Charge.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and as directed by Engr-in-Charge.

S&F Aluminium anodised sliding door bolts 250 mm long with hasp and staple complete all as specified and as directed by Engr-in-Charge.

S&F Aluminium anodised sliding door bolts 300mm long with hasp and staple complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 100mm length Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 including srews complete all as specified and as directed by Engr-in-Charge

S & F in repairs 150mm length Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 including srews complete all as specified and as directed by Engr-in-Charge

S&F in repairs extruded aluminium alloy handle fabricated type anodised 100mm long complete all as specified and as directed by Engr-in-Charge.

S&F in repairs extruded aluminium alloy handle fabricated type anodised 150mm long complete all as specified and as directed by Engr-in-Charge.

S&F in repairs aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and as directed by Engr-in-Charge.

S&F in repairs aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and as directed by Engr-in-Charge.

S&F in repairs aluminium anodised sliding door bolts 250 mm long with hasp and staple complete all as specified and as directed by Engr-in-Charge.

S&F in repairs aluminium anodised sliding door bolts 300mm long with hasp and staple complete all as specified and as directed by Engr-in-Charge.

S&F in repairs aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engr-in-Charge

S & F in repairs Floor Door Stopper of size 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed by Engr-in-Charge

S & F in repairs 4 mm plain sheet glass ordinary quality, in square not exc 0.5 sqm each complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 4 mm plain sheet glass ordinary quality, in square exc 0.5 sqm each complete all as specified and as directed by Engr-in-Charge.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-Charge

M&L for preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-Charge

Taking up or down 15mm bore tubing and connections and removing off the site complete all as specified and as directed by Engr-in-Charge

Taking up or down 20mm bore tubing and connections and removing off the site all complete all as specified and as directed by Engr-in-Charge

Taking up or down 25mm bore tubing and connections and removing off the site complete all as specified and as directed by Engr-in-Charge

Supply and laying of CPVC pipes 16mm dia outer bore SDR 11 & plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified and as directed by Engr-in-Charge

Supply and laying of CPVC pipes 20 mm dia outer boreSDR 11 &plain CPVC SDR 11with all special fittings on walls /ceilings or laying in floors complete all as specified and as directed by Engr-in-Charge

Supply and laying of CPVC pipes 25mm dia outer boreSDR 11 &plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified and as directed by Engr-in-Charge

S&F 16mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and as directed by Engr-in-Charge

S&F 20mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and as directed by Engr-in-Charge

S&F 25mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and as directed by Engr-in-Charge.

S&F 16mm outer dia CPVC pipes brass Elbow complete all as specified and as directed by Engr-in-Charge

S&F 20mm outer dia CPVC pipes brass Elbow complete all as specified and as directed by Engr-in-Charge

S&F 20mm outer dia CPVC pipes brass Elbow (3/4 X1/2) complete all as specified and as directed by Engr-in-Charge

S&F 16 mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and as directed by Engr-in-Charge

Supply and fixing 20mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and as directed by Engr-in-Charge

Supply and fixing 25 mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and as directed by Engr-in-Charge

Supply and fixing 25 mm outer dia brass threaded CPVC tank Adaptor complete all as specified and as directed by Engr-in-Charge

Supply and fixing 20mm outer dia CPVC union complete all as specified and as directed by Engr-in-Charge

Supply and fixing 25 mm outer dia CPVC union complete all as specified and as directed by Engr-in-Charge

Supply and fixing 16 mm outer dia Brass Tee complete all as specified and as directed by Engr-in-Charge

Supply and fixing 20 mm outer dia Brass Tee complete all as specified and as directed by Engr-in-Charge

S & F in repairs Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed by Engr-in-Charge

S&F in repairs Wash basins including brackets, Vitreous China (flat back or angle back type) size 550x450mm (for Hospital use), including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed by Engr-in-Charge.

S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge

S & F in repairs 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engr-in-Charge

S&F in repairs Vitreous China wash down watercloset pan (pedestal pattern), white including Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed by Engr-in-Charge

S&F in repairs stop valves (concealed) cast copper alloy chromium plated with long shank and cup fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore,including necessary cutting and making good wall or floor tiling to match existing ccomplete all as specified and as directed by Engr-in-Charge

S&F in repairs PVC flexible connection with PTMT nuts, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flushtank ,Geyser etc, complete all as specified and as directed by Engr-in-Charge

S&F in repairs brass chromium plated telescopic Hand shower (Health Faucet) fancy type with one meter long easy flex tube in chrome finish & wall Hook complete all as specified and as directed by Engr-in-Charge Make : Model No: jaquar ALD-565

S & F in repairs two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed. Make : Model No: jaquar KUP-35041PM

S & F in repair Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed. Make : Model No: jaquar KUP-35037PM

S&F in repairs stop valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore, etc complete all as specified and as directed Make : Model No: jaquar COP-083KPM

S&F in repairs overhead shower 120mm round shape, fancy type single flow (ABS body chrome plated with grey face palte) with rubit cleaning system including wall mounted shower arm casted 190mm long flat shape, wall flange and suitable for 15 mm bore pipes complete all as specified and as directed Make : Model No: Jaquar OHS-1789, SHA-483

S&F in repairs 15mm dia wall mixer cast copper alloy with capstan heads, chromium plated screwed down high, pressure with provn of overhead shower on upper side connecting legs and wall flanges high quality fancy type complete all as specified and as directed by Engr-in-Charge Make : Model No: Jaquar COP-273PM

S&F in reapris stainless steel towel ring square with round flange fancy type complete all as specified and as directed by Engr-in-Charge Make : Model No: Jaquar ACN-1121N

S&F in repairs towel rail 600mm long superior finished stainless steel complete all as specified and as directed by Engr-in-Charge Make : Model No: Jaquar ACN-1111SM

S & F in reparis soap dish with screws complete all as specified and as directed by Engr-in-Charge. Make : Model No: Jaquar AKP-35731P

S&F in repairs toilet roll holder with stainless steel flap complete all as specified and as directed. Make : Model No: Jaquar ACN-1153S

S&F in repairs corner glass shelf high quality of 5mm thick glass & CP railing with bracket complete all as specified and as directed by Engr-in-Charge Make : Model No: Jaquar ACN-1173

S&F in repairs stainless steel sink with drainage board made out of 1.00 mm thick sheet with plug, washers, Ms angle cantilever brackets for suitable size and connecting union to pipe of overall size 915mm x 460 mm and bowl size 410mm x 330 mm x 160 mm complete all as specified and as directed by Engr-in-Charge

S & F 40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F in repairs vitreous china wash hand basin high quality, white colour of size 590x490x185mm including full pedestal suitable with long screw shank and fly nuts & all acsessarios complete all as specified and as directed. Make Model No: Jaquar LYS-WHT 38301

S & F in repairs Pillar Taps, Chromium Plated,15 mm dia quarter turn fancy type fixed to pipe complete all as specified and as directed by Engr-in-Charge Make : Model No Jaquar KUP-35001PM

S&F in repairs 450mm long braided hose M10X1 15mm nut, O-ring & rubber washer suitable for wash basins etc complete all as specified and as directed by Engr-in-Charge . Make : Model No: Jaquar ALD-803AB

S&F in repairs waste coupling 32mm size half threaded with 80mm height suitable for wash basins complete all as specified and as directed by Engr-in-Charge Make: Jaquar CAT NO. ALD-709

S & F in repairs Angular cock 15 mm dia, cast copper alloy with capstan head, screwed down high pressure with long shank and cup fancy type for iron pipe etc complete all as specified and as directed. Make : Model No: Jaquar KUP-35053PM

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern) of size 380x700x665mm with cistern for coupled, WC with PP soft close slim seat cover hinges, flush cistern fitting, fixing accessories and accessories set complete all as specified and as directed. Make : Model No: Jaquar CNS-WHT 851P180PP

S & F in repairs 32mm PVC waste pipe for drain out from wash basins and fixing to waste coupling complete all as specified and as directed by Engr-in-Charge

S & F in repairs 40mm PVC waste pipe for drain out from sink and fixing to waste coupling all as complete all as specified and as directed by Engr-in-Charge

S & F in repairs PVC Body Cabinet Box Mirror of size 350mm X 450mm X 100mm in PTMT alloy of approved design and pattern complete all as specified and as directed by Engr-in-Charge

S & F in repairs Stainless Steel plate rack of size 910 mm X 960 mm of super deluxe model, suitable for 12 plates made with 22 gauge sheet and weight not less than 5.5 Kg, complete all as specified and as directed by Engr-in-Charge

S&F ìn repairs stainless steel tubing of any diameter or square or rectangular in shape, thickness not less than 1.6mm of grade AISI-316 type austhetic anticorossive in nature as in framed work/post/fencing work/railling/designer work, purposily made doom and base welded with tubing where required including cutting, bending, welding, grinding, buffing and bright polishing the welded joints and adjacent areas and fixing in any type of location complete all as specified and as directed.

M&L for Anti-termite treatment of wood under wooden surfaces, like etc using emulsion @ 15 sqm per litre for single/one side coat (for highly affected more than one coat wll be measued and paid accordingly) complete all as specified and directed by Engineer-in-Charge

M & L for 40 mm thick, PCC 1:2:4, Type B-1, using 20mm graded aggregate as for flooring/levelling/roof padding coarse etc finished even and smooth without using extra cement complete all as specified and as directed.

M&L for second class hard-wood in scantlings and like etc complete all as specified and as directed by Engr-in-Charge

S&F in repairs 18mm thick High density fibre board, exterior grade, fixed to timber framework with screws in cup board shutters,shelves and partition etc complete all as specified and as directed by Engr-in-Charge

S&F in repairs using plwood,grade BWP,type BB 18 mm thick 7 No of ply;fixed with nails to timber frames as in cup board shutters,shelves and partition etc complete all as specified and as directed by Engr-in-Charge

M&L 0.9mm thick Decorative laminates type I surface finish, colour and pattern as approved incl all necessary cutting to the size and pasting to the wood surface with and including approved synthetic adhesive as per manufacturer's instructions complete all as specified and as directed by Engr-in-Charge

S&F repairs 30mm width continuous (piano) hinges mild steel finish or electrogalvanised complete all as specified and as directed by Engr-in-Charge

S&F in repairs 100mm long hasp and staples mild steel wire type stove enamelled black including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engr-in-Charge

S&F in repairs stainless steel auto closing heavy duty modular hinges of size 103 x 64mm for cupboard shutters complete all as specified and as directed by Engr-in-Charge

S & F in repair fancy type curtain rod, stainless steel, chromium plated 25mm dia with stops, rollers etc complete all as specified and as directed by Engr-in-Charge

S & F in repair brass brackets fancy type chromium plated suitable for curtain rod 25 mm dia complete all as specified and as directed by Engr-in-Charge

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and fair without using extra cement complete all as specified and as directed by Engr-in-Charge Note: Water proofing compound will be measured and paid separately.

M & L for rendering 5mm thick in CM (1:3) on ceiling (external) surfaces finished even & smooth without using extra cement complete all as specified and as directed by Engr-in-Charge Note: Water proofing compound will be measured and paid separately.

Material & Labour for rendering the identified RCC surfaces with 15 mm thick POLYMER MODIFIED MORTAR in One layer of relevant proportion and weight of polymer, cement and filler material as per approved make, blended to a required consistency, applying, finishing and curing as per manufacturer's instructions complete all as specified and as directed by Engr-in-Charge.

Supply only Integral water proofing compound ISI marked complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer and including applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smoothall complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and as directed by Engr-in-Charge.

M & L for preparion of new surface and applying two coats of 100% Premium weather coat exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed by Engr-in-Charge.

M & L for preparation of old wooden surfaces exc 10cm width and girth and applying two coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

M & L for preparation of old steel surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

Demoliton of cement concrete and mortar of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge.

M&L for 100mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in floors sub-base complete all as specified and as directed by Engr-in-Charge..

M & L for heavy duty Chequered cement concrete tiles 30cm x 30cm x 8-10 mm thick, set, jointed and pointed in near cement slurry in floors With grey cement and pigments and including screed bed 15mm thick CM 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L for 100mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in floor/hard-standing finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

Demolition of precast concrete block walling built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

M&L for precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:4) complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 15mm thick in concrete/masonry surfaces CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge

S&F aluminium alloy wire cloth .045mm nominal dia of wire and average width of aperture 1.40 and fixed with aluminium wire staples complete all as specified and ad directed by Engr-in-Charge

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation, filling, mass concrete, drain etc complete all as specified and directed by Engr-in-Charge

S&F in repairs 18mm thick Medium density fibre board, exterior grade, fixed to timber framework with screws in cup board shutters,shelves and partition etc complete all as specified and as directed by Engr-in-Charge

GAYATRI ENTERPRISES

bansal construction

EXCEL ENGINEERING WORKS

V CHINNA DURAI

BISAKHA PLUMBING WORKS

M/s J. M. Enterprises

M/s Shiva Engineering

KHOTEL CONSTRUCTION