WBPWDTE/AE/BESD-I/e-NIQ 25 of 2024-25

Amount

Distribution wiring in 1.1 KV grade 3x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar and 'L' sahped insulator chair with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed] [PWD/GS Page: E-25 Item: 4] Average run: 09 Mtr.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required [PWD(E)SOR Page: E-14 Item: E/1/a] 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC (16A S/S)

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [PWD(E)SOR Page: F-5 Item: 9]2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Supply & Fixing 240 V, two nos. 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with two nos. 6A Modular type switch, without plug top on 16 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

S&F OLP-3 Starter incorporated in a box made of 16 SWG CRC sheet with Bakelite top cover and earthing attachment in conceal in wall as per GS. (Electron/ Ultra-tech) with volt check, amp check & time check. (For A.C.)

Supply & Fixing of 7 watt LED wall facade Light Philips make CAT NO : 58161 GAMMA 3 HEAD, on wall by special tools & tackles & interconnection as per direction of EIC.

S&F 3 Watt Spot Light LED Fittings Warm White Philips Make ASTA COB, after cutting the false ceilling tray with special tools & tackles & interconnection.

Supply & Fixing 50 watt, 4500 lm LED Strip Light Make Philips CAT No : LED Strip Linea Premium (Warm White), on false ceilling tray with the 3M double side adhesive tape, as per direction of EIC.

Supply & Fixing of wall bracket light fittings Philips make CAT No : 58135 ROSEATE WALL LIGHT 2H incorporated of 12 Watt Warm White E27 bulb Philips make on wall by bullet fastner incl. interconnection as per direction of EIC.

Supply & Fixing 9 Watt LED Bathroom mirror lamp with IP65 protection make Philips CAT No : 581916

S&D of 9 Watt E27 LED warm white lamp

S&F of G9 360 degree LED warm white lamp for replacing the old damage lamp of chandelier fittings

Supply & Fixing of 2 Module LED step light after dismalt the old damage light fittings on the stair case make Philips 30974

S&F 400 mm sweep 1350 RPM Decorative Wall Bracket fan with remote arrangement Havells make (CAT NO AINDRILA 400 mm sweep Dusty Rose White) or equivalent make Crompton/ Orient.

Supply & Fixing of 1200 mm Decorative type wall ceilling fan make Havells Florenc (Black Antique Copper) incl proper saftey rope & clamp arrangement for additional saftey.

Supply & Fixing of additional heavy guage downrod for the above mentioned ceiling fan incl. metalic paint finish to match with the fan body finish as per direction of EIC.

S&F of new circuit board for the wall bracket fan make Havells Aindrilla, after dismalt the wall bracket fan, circuit board & refixing all the accessories and mounted on wall as per direction of EIC.

S&F 220V, 50Hz, 250 Watt LED flood light fittings make: Crompton CFS-506-250-57-60D-HL2-GL-NSG /Philips or similar make on existing pole after dismalt the old damage fittings.

S&F 60 Watt LED street Light Fittings make Crompton Cat No :CRP-409-60-57-HL2-GL-NSG or equivalent make of on existing pole after dismalt the old damage fittings.

Supply & Fixing of 240V, 135Watt LED Flood Light fittings on exisiting pole Crompton Make LFLN 135 CDL/60-M on existing pole after dismalt the old damage fittings

S&F 240V, 10 watt Decorative Bollard Luminaire Crompton Make CAT NO : LBLSN-10-CDL or equivalent make of Philips/Havells incl. interconnection of the bollard & fixing the bollard fitting on the muffing.

S&F of new LED driver Philips make after dismalt. of old damage driver incl. cheaking testing & installation on the pole to 75 watt Philips Make

150 Watt Philips Make

S&F of new LED driver Crompton make after dismalt. of old damage driver incl.cheaking testing & installation on the pole top 75 watt

Surge protector

Cheaking Testing incl. cleaning all the fittings (78 Nos of fittings incl. outdoor & Indoor Luminiaries) & dismalt. Of Broken Street Light fittings incl. repairing & fixing by S&F new driver etc.

Providing of manpower for VVIP visit by High Skilled electrician 2 No & Semi skilled electrician 1 No. for 4 Days, 2 shifts incl. checking all the elctrical equipment switchgear, fittings fixture, DG Connection as per direction of EIC.

Servicing of the Air Conditioners indoor & outdoor unit by using of jet pump & other accessories at the Bishnupur Bungalow

Supply & Installation of new Fan motor assembly for 2 Ton Mitsubishi Electric Air Conditioner machine outdoor unit, after dismalt the old burn out fan motor assemble.

Supply & Charging additional R410 refrigarent for the air conditioner units.

R.K.ENTERPRISE (BID ID -6132127)

RS SYSTEMS AND PROJECTS (BID ID -6139958)