Beautification of PD Watersheds Office Sambalpur, Burla including furnishing and construction of Boundary wall, Sambalpur

Earthwork in excavation of foundation in hard of soil within initial lead and initial lift including rough dressing and breaking rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 m in depth including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC.

Earth work by mechanical means borrowed from out side within 5km initial lead and 1.5m initial lift including levelling and dressing the bed and sides depositing muck within initial lead and lift etc. complete as per direction of Engg-in-Charge .

Supplying, Filling sand in foundation & plinth well watered and rammed including cost, conveyance, taxes, royalty of sand, labour & T&P, Labour welfare cess@1% etc. complete as per specification and direction of the EIC.

Cement Concrete (1:4:8) by using 40 mm size hard granite crusher broken chips of approved quality and form approved quarry including lowering laying concrete, watering and curing etc. complete for required levels laid in layers including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC.

C.C. work M-20 grade using 20mm.and down grade HBG crusher broken chips including hoisting,laying, cost,conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge .

Plain cement concrete (1:2:4) using 12 mm size hard granite crusher broken chips of approved quality and form approved quarry including lowering laying concrete, watering and curing etc. complete for required levels laid in layers including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work, etc. complete as per the direction of the EIC.

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantaling then after casting including cost of materials etc. complete as per direction of Engg-in-Charge .

Providing Fly Ash brick masonry work in F&P using 230 mm X 110 mm X 80 mm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand) (Using Branded Cement), immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc., Labour Welfare cess @1% complete as per the direction of the EIC.

Providing Fly Ash brick masonry work in superstructure using 230 mm X 110 mm X 80 mm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand) (Using Branded Cement), immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc., Labour Welfare cess @1% complete as per the direction of the EIC.

Reinforced Cement Concrete M20 grade 20mm & down graded size hard granite crusher broken chips of approved quality and from approved quarry including centring, shuttering, lowering, laying concrete, watering and curing etc. complete for required levels laid in layers including cost, conveyance, royalty and taxes of all materials and cost of labour, T&P,Labour Welfare cess @1% required for the work etc. complete as per specification and direction for the EIC.

Column base

Plinth Beam

Column & Beam

Lintel Beam/ Wall Coping

Chajja

Roof Slab

Supplying MS round / deformed / tor steel reinforcement bars (of only manufacturing companies such as SAIL / RINL / TATA / JINDAL STEEL / SHYAM STEEL) (of approved grade) of required diameters of approved quality including straightening, cutting to size, bending, and binding, lifting and placing in position as per design, complete including cost of bars, binding wires 18 gauge, including cost of all materials , labour, conveyance, loading and unloading, taxes, cess, royalties. sundries, tools and plants etc. Labour Welfare cess @1% complete as per the direction of the EIC. (Linear measurement will be taken and quantity will be calculated on standard weight for all heights).

12 mm thick cement plaster in cement mortar (1:6) with watering and curing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC.

16 mm thick cement plaster in cement mortar (1:6) with watering and curing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC.

12 mm thick cement plaster in cement mortar (1:4) with over brick masonry along with watering and curing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC.

12 mm thick cement plaster in cement mortar (1:4) with neat cement punning over brick masonry along with watering and curing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC.

6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC.

Cement punning including watering and curing complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC.

Priming one coat to wall surface with water bound cement primer complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC.

Finishing exterior walls with Weather Seal Coat Paint of approved shade on new work two coats to give an even shade complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC.

Wall Painting two coats with plastic emulsion paint of approved quality over a coat of wall primer to interior wall surface including cost of paint, primer, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect.

Fixing anti-skid Ceramic tiles size 30 cm x 30 cm / 40 cm x 40 cm in Floors, Treads on steps & landing on 25 mm thick bed of cement mortar [1:1] joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC.

Fixing Ceramic tiles 20 cm x 30 cm / 20 cm x 20 cm in Dado, Skirting and rises of steps on 12 mm thick cement mortar [1:3] joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete including rubbing and polishing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC.

Supplying, fitting and fixing of powder coated M.S. Grill made out of M.S. sections as per approved drawing and design, cutting to required size and welding properly, finished smooth and sand papering, with all fitting and fixtures including cutting holes in the brick masonry and RCC columns and making good to damage, complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC.

Painting two coats with Enamel paint over one coat of Red oxide Primer of approved quality on new iron work complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the Engineer In Charge.

2.5 cm thick grading concrete [1:2:2 ] on roof slab with 6 mm size chips including rubbing and polishing etc. complete including watering and curing complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC.

30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete including Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement , including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge.

Supplying , fitting and fixing of two Track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame. shutters and all fitting and fixtures etc. complete as per direction of Engg-in-Charge . as per SR-2022, Page No.-235, Sl. No.-12

Supplying and fixing of Roller blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.60 mm thick fabric of approved design and quality etc. complete. SR-2022, page No.-234, sl no,-5

Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m lead etc. complete. as per direction of Engg.-in.charge.

Supplying, Fitting and fixing Vitrified tiles in Floors (printed Series) of size 600 mm x 600 mm of approved make conforming to IS13755 laid on 20 mm thick cement mortar [1:4] filling joined with white cement of approved quality icomplete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC. [For New work only]

Fixing Vitrified tiles in dados (Printed Series) skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing complete as per direction of Engineer-in-charge.

Providing ,fitting & fixing of Conference Table made up with 19 mm thick phenol bounded.BWR grade ply wood and subsequently finished with 1mm thick BWR grade decorative laminates of approved shade on required side over wooden frame fixed with raw plug including drilling of necessary holes fixed by synthetic adhesive and headless pins with all assosarry etc. complete as per direction of Engineer in charge.

Supplying and fixing of 60mm thick cement concrete interlocking paver block of M-30 grade of approved make,design,colour and size made by block making machine with proper compaction laid in required pattern etc. complete in all respect confirming to IRCSP63:2018 etc. complete as per direction of Engg-in-charge. As per S/R 2022 Page No-233 sl No.25.17(1)

Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm ofM-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect confonning to IS 5758: 1984.etc.complete including all cost etc. complete as per direction of Engg-in-Charge . As per S/R 2022 Page No.-233 sl No.-3

Supply and fixing 18W Integrated solar street / Garden light suitable for perfect solar system solution for remote & off grid locations. Housing in aluminium alloy body which makes it water & rust proof with IP65.Enclosed inside the unit multi cell LEP Technology BATTERY Lithium Ion/Oxide 24Ah+1%,12.8V+0.4V,Max continuous discharge current (w/o PCM)upto42A,should conform to the latest BIS/International standards which is charged by a highly effiecient mono-crystalline solar panel.The LED Iuminary delivers close to 120 lumens per watt and is made from the finest LEDs from Bridgelux/Oshram/Philips confirmed to BIS specification.The light must have dust to drawn system to auto control the device.The Streetlight is a plug & play unit and can be very easily mounted on walls or poles via the extensions provided with the product itself.A manual ON/OFF switch has also been provided so that the light can be awitched off when not in use for a long time etc. complete as per direction of Engg-in-Charge .

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared etc. complete as per direction of Engg-in-Charge . (CPWD -DSR Horticulture & Landscaping -2020, Page No.-265, sub Haed-2.31)

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. etc. complete as per direction of Engg-in-Charge . (CPWD -DSR Horticulture & Landscaping -2020, Page No.-265, sub Haed-2.32)

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : etc. complete as per direction of Engg-in-Charge . (CPWD -DSR Horticulture & Landscaping -2020, Page No.-224, sub Haed-2.40)

Screened through sieve of I.S. designation 20 mm

Screened through sieve of I.S. designation 16 mm

Screened through sieve of I.S. designation 4.75 mm

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation etc. complete as per direction of Engg-in-Charge . (CPWD -DSR Horticulture & Landscaping -2020, Page No.-227, sub Haed-2.60).

Spreading of sludge, dump manure and/or good earth in required thickness (cost of sludge, dump manure and/ or good earth to be paid separately). etc. complete as per direction of Engg-in-Charge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-228, sub Haed-2.80)

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge . (CPWD -DSR Horticulture & Landscaping -2020, Page No.-228, sub Haed-2.90)

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) specified or directed by the Officer-in-charge . (CPWD -DSR Horticulture & Landscaping -2020, Page No.-230, sub Haed-2.14)

Holes 1.2 m dia and 1.2 m deep

Holes 0.90 m dia and 0.90 m deep

Holes 0.60 m dia and 0.60 m deep

Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-238, sub Head-2.28)

Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer incharge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-246, sub Head-2.33)

Anti termite treatment by digging holes 300mm deep and 40 mm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge.as per direction of officer-in-charge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-258, sub Head-2.54)

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material’s as per direction of officer in charge (excluding cost of plant & water) as per direction of officer incharge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-259, sub Haed-2.57)

plantation per Tree

plantation per Shrub

plantation per Hedge/Ground cover

Providing and displaying of Aglaonema Butterfly plant having ht.30 cm 10 to 12 fresh, healthy and attractive colorful leaves, well developed in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-275, sub Haed-3.10)

Providing and displaying of Aglaonema Ice plant ht.25 cm having 10 to 12 fresh, healthy and attractive colorful leaves, well developed in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-275, sub Haed-3.20)

Providing and displaying of Aglaonema Parrot Jungle plant (three in one), having ht. 30 cm and above with 20 to 25 leaves, well developed, fresh & healthy in 25 cm size of Earthen pot/ Plastic pot & as per direction of the officer-in-charge (CPWD -DSR Horticulture & Landscaping -2020, Page No.-275, sub Haed-3.20)

Providing and displaying of Araucaria cookie plant, having ht. 60 cm to 75 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 20 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge (CPWD -DSR Horticulture & Landscaping -2020, Page No.-278, sub Haed-3.13)

Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge (CPWD -DSR Horticulture & Landscaping -2020, Page No.-280, sub Haed-3.18)

Providing and displaying of Croton baby golden variety plant, having ht.30 cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-282, sub Haed-3.28)

Providing and displaying of Dracaena Song of India plant (three in one), having ht. 30 cm and above, multibranchesed, well developed with fresh and healthy leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge (CPWD -DSR Horticulture & Landscaping -2020, Page No.-287, sub Haed-3.44)

Providing and displaying of Rhapis palm specimen plant, having ht. 1.50 m to 1.65 m with 40 to 50 lush green suckers, well developed, fresh & healthy foliage leaves in 40 cm size of Earthen Pot/Chali/Tray & as per direction of the officer-in-charge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-296, sub Haed-3.78)

Providing and displaying of Rhapis palm specimen plant, having ht. 1.50 m to 1.65 m with 40 to 50 lush green suckers, well developed, fresh & healthy foliage leaves in 40 cm size of Earthen Pot/Chali/Tray & as per direction of the officer-in-charge.Providing and Displaying Asiatic lilly hybrid variety (3 in one) plants in each pot having in full bloom 3 to 5 flowers 30 to 45 cm ht. well developed in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge (CPWD -DSR Horticulture & Landscaping -2020, Page No.-304, sub Haed-4.60)

Providing and Displaying Asiatic lilly hybrid variety (3 in one) plants in each pot having in full bloom 3 to 5 flowers 30 to 45 cm ht. well developed in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-304, sub Haed-4.60)

Providing and Displaying Brachycome well developed with fresh & healthy foliage with 100 to 120 flowers stacking with green painted bamboo stick in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge (CPWD -DSR Horticulture & Landscaping -2020, Page No.-305, sub Haed-4.90)

Providing and Displaying Dahlia single in different colour with fresh & healthy foliage well developed with 6 to 8 half blooming buds in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge (CPWD -DSR Horticulture & Landscaping -2020, Page No.-309, sub Haed-4.25)

Providing and Displaying Helianthus different colour with full bloom (3 in one) fresh & healthy in 25 cm Earthen Pot/Plastic Pot well developed as per direction of the officer-in-charge (CPWD -DSR Horticulture & Landscaping -2020, Page No.-311, sub Haed-4.34)

Providing and Displaying Marigold jaffri orange/yellow/Russet colour well developed with fresh & healthy foliage with 40 to 50 flowers in bloom specimen plant 60 to 75 cm ht in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge (CPWD -DSR Horticulture & Landscaping -2020, Page No.-312, sub Haed-4.37)

Providing and Displaying of Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-326, sub Haed-4.93)

Providing and Displaying Acalypha red well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge (CPWD -DSR Horticulture & Landscaping -2020, Page No.-328, sub Haed-5.20)

Providing and Displaying Bamboo Buddha valley with fresh & healthy 3 to 4 suckers having 75 to 90 cm ht. in 25 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge (CPWD -DSR Horticulture & Landscaping -2020, Page No.-330, sub Haed-5.70)

Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-incharge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-331, sub Haed-5.11)

Providing and Displaying Cyprus golden well shaped developed with good colored foliage fresh & healthy 60 to 75 cm ht in 30 cm Earthen Pot as per direction of the officer-in-charge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-333, sub Haed-5.17)

Providing and Displaying Foxtail palm well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-336, sub Haed-5.30)

Providing and Displaying Furcaira variegated well developed with fresh & healthy foliage 8 to 10 leaves in 30 cm Earthen Pot as per direction of the officer-in-charge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-336, sub Haed-5.31)

Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-incharge.. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-345, sub Haed-6.12)

Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 3-4 branches inearthen pots of size 20 cm as per direction of the officer-in-charge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-381, sub Haed-8.30)

Providing and stacking of Hibiscus variegated of height 60-75 cm. with healthy variegated foliage in earthen pots size 25 cm as per direction of the officer-in-charge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-383, sub Haed-8.40)

Providing and stacking of Murraya exotica of height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge (CPWD -DSR Horticulture & Landscaping -2020, Page No.-384, sub Haed-8.46)

Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs,herbs, edge, flower beds, foliages, creepers etc. including hoeing pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by officer-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide, lawn mover and brush cutter with fuel & other T & P material/articles shall be provided by the department.) as per direction of officer incharge. (CPWD -DSR Horticulture & Landscaping -2020, Page No.-249, sub Haed-2.39)

Office Accommodation for 12 month

Removal of garden waste by TATA 407 or equivalent including loading/unloading and carriage upto 1 km lead,complete disposal upto designated place as per direction of officer-in-charge (CPWD -DSR Horticulture & Landscaping -2020, Page No.-260, sub Haed-2.60)

S/F of Garden/ Lawn light fitting with LED SOLAR GARDEN LIGHT/BOLLARD etc. complete

Providing, fitting and fixing RCC garden chair including all materials, labour, tranporting , taxes(excluding GST) as per direction of the officer-in-charge

Supply and fixing 18W Integrated solar street / Garden light suitable for perfect solar system solution for remote & off grid locations. Housing in aluminium alloy body which makes it water & rust proof with IP65.Enclosed inside the unit multi cell LEP Technology BATTERY Lithium Ion/Oxide 24Ah+1%,12.8V+0.4V,Max continuous discharge current (w/o PCM)upto42A,should conform to the latest BIS/International standards which is charged by a highly effiecient mono-crystalline solar panel.The LED Iuminary delivers close to 120 lumens per watt and is made from the finest LEDs from Bridgelux/Oshram/Philips confirmed to BIS specification.The light must have dust to drawn system to auto control the device.The Streetlight is a plug & play unit and can be very easily mounted on walls or poles via the extensions provided with the product itself.A manual ON/OFF switch has also been provided so that the light can be awitched off when not in use for a long time etc. complete as per direction of Engg-in-Charge .

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge

15mm pipe

20mm pipe

25mm pipe

Providing, fitting and fixing of automatic sprinkler with all fittings(Includes- Main, Submain, Lateral, Headunit and sprinkler set) for workable condition and tested as per direction of the officer-in-charge

Supply and fixing of MCM Modified Clay Material - MCM A Series Brick - 240 x 60 mm of PHOMI make, as per company standard dimension, pattern, colour as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation - Class A— ASTM E84- 15. The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in-charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in-charge.

Supply and fixing of MCM Modified Clay Material - MCM R Series Brick (087089) - 222 x 63 mm of PHOMI make, as per company standard dimension, pattern, color as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation - Class A— ASTM E84- 15. The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in-charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in-charge.

Supplying,fitting and placing of Man Hole Chamber including cost,conveyance and all taxes of steel and binding wire etc.complete as per direction of Engg-in-Charge . 500x500mm Square Man Hole Cover -22.0 kg Page No.-153, Sl No.-391, S/R-2022

Laying (to level or slopes) and jointing with rubber rings pre-cast reinforced socket and spigot concrete pipes Class NP-3 conforming to IS:458 - 2003 suitable for rubber ring roll on joint of the following internal diameter as per specification complete. (Earthwork in trenches to be measured and paid for separately) 300mm NP-3 pipe

Supplying , fitting, fixing and hoisting of 125mm MS pipe for cow catcher and MS Sections in joists and trusses and placing in position to receive GCI roofing etc. complete as per direction of Engg-in-Charge .

Nut , bolt, Anchor bolt etc S/R-2022,Page-53, Sl-123

Supplying and fixing of 60mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018.t etc. complete as per direction of Engg-in-Charge . As per S/R 2022 Page No.-233 sl No.25.17(1)

Supply fitting and fixing of 0.40mm GCI. Sheet in in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. including cost of fitting as per direction of Engineer-incharge.

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front modular cover of suitable size , MS modular box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )

Group-A

Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor o f ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard)

Supply and fixing of 3 no.sof 3pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 socket out let and S.P. 15/16 A one way modular switch on Modular G.I. Box with Modular Base and cover (Make of wire Finolex/L&T/Anchor/Havels/V Guard)

Supply and fixing of 3 pin 6Amp plug with 6Amp switch on existing board (Modular type ).(Make of wire Finolex/L&T/Anchor/Havels/V Guard)

Supply and fixing of following way single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic covr for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB / RCCB / Isolator) - 4 way

Supply and fixing of 5Amp to 32A rating 240V "B/C" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S)

S/F of 8" PLASTIC VENTILLATING FAN exhaust fan (Make-Crompton Model-Jura, Polycab Model-Vital, Polar Model-Winpro) etc.

S/F of 1x18 Watt LED T-5 fitting(Make-Crompton/Philips/Havells/Bajaj)

Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per Engg.-in- charge. 250mm wall

Cutting holes in R.C.C floors and roos upto 19cm thick for passing G.I/P.V.C pipes and fitting etc. and prepairing the holes after insertion of pipe etc. with cement concrete 1:2:4 including finishing complete so as to make it leak proof as per Engg.-in- charge.

Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification etc complete as per Engg.-in- charge.

Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes complete as per direction of Engineer-in-Charge

75mm OD UPVC SWR S/S pipe (ISI type-A)

90mm OD UPVC SWR S/S pipe (ISI type-A)

110mm OD UPVC SWR S/S pipe (ISI type-A)

Laying in trenches unplasticised PVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by heat application method including testing as per specification complete. (Earth work in trenches to be measured and paid for separately)

125mm dia rigid UPVC pipe Class-3 (0.6 Mpa)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge

20mm dia CPVC pipe

25mm dia CPVC pipe

Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansios etc complete as per direction of Engineer-in-Charge

PVC SWR coupler

75mm OD UPVC SWR coupler

90mm OD UPVC SWR coupler

110mm OD UPVC SWR coupler

Single Tee with Door

75x75x75 mm dia UPVC SWR Tee

90x90x90 mm dia UPVC SWR Tee

110x110x110 mm dia UPVC SWR Tee

SWR Plain Bend 87.5o

75mm dia UPVC SWR Plain Bend 87.5o

90mm dia UPVC SWR Plain Bend 87.5o

110mm dia UPVC SWR Plain Bend 87.5o

SWR Door Bend 87.5o

75mm dia UPVC SWR Door Bend 87.5o

90mm dia UPVC SWR Door Bend 87.5o

110mm dia UPVC SWR Door Bend 87.5o

Fixing 100mm size ‘P’ or ‘S’ trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification. etc complete as per direction of Engineer-in-Charge

‘P’ trap (with horn or without horn)

‘S’ trap (with horn or without horn)

Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification all etc. complete as per direction of Engg. in charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixers etc. complete as per direction of Engg. in charge.

Fixing Wash Basin with hole for pillar type with cast iron or M S bracket painted white including cutting holes in the walls and making good the damages etc. complete as per direction of Engg. in charge. For Wash Room Porcelain 22"x 16"(550x400) W.H.B with pedestal

Fixing glazed earthenware squatting plate of size 600mm x 350mm conforming to IS:2556- Part-6-1995 with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard granite metal all complete as per specification etc. complete as per direction of Engg. in charge. One-seated Urinal 1m x 0.50m x 0.15m size

Fixing PVC waste pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specificationetc. complete as per direction of Engg. in charge.

Fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specificationetc. complete as per direction of Engg. in charge.

Fixing of Brass Screw-down Bib Cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specification etc. complete as per direction of Engg. in charge.

15mm Short Body Bib Cock

15mm Long Body Bib Cock

Fixing of Brass Screw-down Angle/Counseales stop cock Cocks polished bright conforming to IS:781-1995 of the following nominal sizes as per specification etc. complete as per direction of Engg. in charge.

15mm dia CP Brass Angle Stop Cock

20mm dia CP Brass Concealed Stop Cock

Fixing of Brass 15mm dia CP flange of the following nominal sizes as per specification etc. complete as per direction of Engg. in charge.

15mm dia CP flange

Fixing Bib Cock capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of the following nominal bore as per specification etc. complete as per direction of Engg. in charge.

15mm dia C.P. Pillar cock with swinging spout

C.P.revolving shower (bend type)

CP Health Foucet with 1.0 mtr PVC Tube

Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specificationetc. complete as per direction of Engg. in charge.

Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium Plated brass screws as per specification complete as per direction of Engg. in charge.

Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification. complete as per direction of Engg. in charge.

Fixing Chromium Plated brass soap container/ disc complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws

Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification complete as per direction of Engg. in charge. 1000 litre capacity Double Layer Cylinderical Vertical water storage tanks

Supply , fitting and fixing of following fixers including all materials and labours etc all complete as per specification complete as per direction of Engg. in charge.

450x450mm Square Man Hole Cover -16.0 kg

90mm dia P.V.C. Nahani Trap

110mm dia PVC SWR Single Y with door

PVC SWR Jalli 110mm dia

110 mm dia P.V.C. SWR Vent Cowl

25mm UPVC ball valve Sch-80(Solvent Welded with Metal Ball)

Labour for drilling a perfectly vertical bore well of 200mm dia below ground level by use of own rig with its accessories, tools and plant and consumables etc for lowering of PVC casing fitted with socket and with or without well screen as per the necessity for soft, mediun hard and boulder formation (PVC casing pipe if required to prevent collapse of over burden). from 00 m to 30 m (200mm) & from 30 m to 90 m (150mm)

Cost of 200mm dia Casing Pipes confirming IS:12818:2010 of reputed make specification. Manufacturer name should prominently be marked with CIPET cerficate in body of pipe in indeliable ink stenciled to the satisfaction of Engineer-in-charge.

Cost of lowering of casing pipe (200mm dia PVC pipe)

Cleaning and developing the bore well using their own compressor continuousely worked till clear and adequate discharge ois obtained from the well including supply and use of all necessary equipments and labour as per the direction of enginbeer-in-charge.

Cost of submerssible pump (18 stage single phase) of any reputed make (Kirlosker, Lubi etc) with ISI mark

Cost of UPVC column pipe( 50mm, Schedule-80, ASTM-D-1785/2004)

Cost of submersible cable (2.5 sq.mm.) of ISI marked

Accessories of pump fitting (reducer, nipple, short piece, bore cover, end cap etc) upto overhead tank.

Staineless steel wire rope for suspending the pump

Cost of control panel of approved make for 1.5HP Submesrsible Pump

Installation charges for pumpset, control panel and accessories.