Edaikazhinadu Town Panchayat- MPLAD - 2025-26 - Highmast Light

Design,Supply, erection,Testing Commissioning and handing over of High Mast Stecture Bajaj/Philips/amke or equilant with required number of continuously tapered hot dip galvansied steel polygonal side sections with telescopic strip joints to a total of 16 meters capable of sustaining the maximum wind pressure at the erection site with single flange base mast section with vertically moveable hot dip galvanised lantern carriage and accessiries such as electrical junction box brackets for providing 8 Nos of LED light luminaries with control gear box complete head frame assembly, pully drive Stainless steel wire rope single/double drum self lubricating winch arrangements suitable for raising and lowering the luminaries carraige ring flexible multi core power cable and necessary high tensile hot dipped galvanized foundation, bolt& nuts along with washers and templates including supply and fixing the following accessories in the Mast Design,Supply, erection,Testing Commissioning and handing over of High Mast Stecture Bajaj/Philips/amke or equilant with required number of continuously tapered hot dip galvansied steel polygonal side sections with telescopic strip joints to a total of 16 meters capable of sustaining the maximum wind pressure at the erection site with single flange base mast section with vertically moveable hot dip galvanised lantern carriage and accessiries such as electrical junction box brackets for providing 8 Nos of LED light luminaries with control gear box complete head frame assembly, pully drive Stainless steel wire rope single/double drum self lubricating winch arrangements suitable for raising and lowering the luminaries carraige ring flexible multi core power cable and necessary high tensile hot dipped galvanized foundation, bolt& nuts along with washers and templates including supply and fixing the following accessories in the Mast design and casting of suitable foundation with 1:2:4 mix RCC concreate with 30cm projection above the ground level with 1 mtr width X 1mtr length and 2 mtrs depth with necessary galvanised foundation bolts nuts and washers and dump plates enclosing the bolts nuts for high mast cosidering the safe soil bearing capacity at site-1 Set b) High powered power tool with complete with hand held control panel and motor with push button type remote control switch suitable for 3 phase 415 V /50 HZ for raising and lowering of the lantern carriage complete to operate all fittings mounted in the base to couple with winch-1 SET c) Feeder piller box comprising 0.90m x 0.45m x1.20m floor angle iron frame with 63 A power contactor starter for the 3 Phase motor-1Set d) Neon aviation obstruction light (BajajBjaol(2)/equilant-1 e) 2Nos of special GI earth electode with copper plate 300 x300x3mm and copper flat (1"x1 1/4")inter connection as per ISS complete with earth connections-1SET f) Hot dip galvanised lighting arrester- 1 No g) Flood light luminaries of specially heavy type water proof dust proof integral luminaries fittng provides with 150 watts LED fttings Crompton/Philips make or equivalant with 8x150W LED bulbs with drive , algias coated reflectors with complete as per standard specification ( MR) WRD 2025-26 Page No-228 M-2138

Supply and laying of 4 x 10 sq mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Laner of sand and covering the cable completely with bricks and sand and refilling the earth to make good (SD-227)

Supply and clamping of 4 x 10 sqmm PVC LTUG armoured LTUG cable on post or on wall with MS clamps. (SD-227)

Dismandling for the plain cement concrete including cost of all machinary & labour charges (SD-30)

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Please Enable Macros to View BoQ information