SPECIAL REPAIR OF HARDSTANDING UNDER HQ 31 SUB AREA MT GARAGE BLDG NO T 224 OF 15 CPU AND ADDN ALTN TO QUARTER GUARD OF 11 FSG ATTACHED BK BUILDING NO T 248 AND MANDIR BLDG NO 237 OF 15 CPU AND PROVN OF CHAINLINK FENCING AT HQ SUB AREA AT BB CANTT

Amount

Demolition of brickwork/stone boulder masonery built in cement or cement lime mortar complete all as specified and directed.

M&L brickwork with sub class B brick straight or curved on plan exc 6m mean radius built in cement mortar in CM 1:6 complete all as specified and directed.

M&L for walling of random rubble, stone masonry, brought upto courses, well bonded, bedded and solidly hearted , built-in-cement mortar (1:4) and pointing flush the surfaces in contact with earth in the same mortar as the work proceeds, including providing necessary weep holes at 2 meter centre to centre (staggered) complete, all as specifieed and as directed.

M&L formwork to sides and soffits of floor or roof beams, lintels flat rough finished surface of concrete complete all as specified and directed.

M&L RCC (nominal mix) type B1 1:2:4 (20mm graded aggregate) as in beams/ lintels complete all as specified and directed.

M&L TMT steel bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 6 above but 5mm dia and over up to and including 10mm dia as in stirrups

M&L for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.

M&L prepration of new surfaces and applying two coat of OBD on new surfaces on wall over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surface on wall and applying two coats of cement base paint over one coat of cement primer complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness incl nainital or similar pattern roof-covering complete all as specified and directed.

M&L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 Cum and getting out, returning filling in and ramming earth or broken rubble with earth around in layers not exceeding 25 cm thick in soft loose soil complete all as specified and directed.

M&L Plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc.complete using ERW or induction butt welded tubes complete all as specified and as directed.

S&F mild steel screw bolts (Machine made) dia of neck 16 to 20mm with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 22.5 cm but n exc 30 cm complete all as specified and as directed.

S&F mild steel screw bolts (Machine made) dia of neck 16 to 20mm with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, butt length of bolt exc 5 cm but n exc 10 cm complete all as specified and as directed.

M&L preparation new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide surface of any description not other wise described over 10 cm width or girth complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in unframed work in any position complete all as specified and directed.

S&F 2nd class soft wood clean sawn timber fixed in scantling complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails unframed work complete, all as specified and directed.

S&F 20mm thick boarding clean sawn as in eaves board fixed with nails complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 square metre but n.exc 4 square metre each,complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed.

S&F 2nd class soft wood plain solid straight chowkhats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed.

S&F 35 mm thick IInd class soft wood plain framed panelled shutters (any number of panels), with lock rail and panel of 9mm BWP, commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS : 1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 100 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and directed.

S&F 150 mm size aluminium handles cast type anodised complete all as specified and directed.

S&F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness ( below or above ground level) complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in sub base of floors finished even and fair complete all as specified and directed.

M&L for Non-skid Ceramic tiles 7 mm thick ( square) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm (min size 600x600mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured in white or coloured cement to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:4), complete all as specified and directed.

M&L 75 mm thick plain cement concrete 1: 3: 6 type C-2 (using 20 mm graded crushed stone aggregate) laid in alternate bays (not exc 2 sqm each) as in plinth protection, finished the surfaces even and smooth without using extra cement complete, all as specified and as directed.

M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed.

M&L 100 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed.

M&L 100 mm thick Cement concrete type B 2, 1:2:4 (using 20 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed.

Forming 100mm deepx12mm thick wide expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as per specified and directed.

Forming construction (Dummy)Joints 65x10mm wide and filled with sealing compound Grade A complete all as specified and directed.

Forming construction joints 30X10mm wide and filled with sealing compund grade A complete all as per specified and directed.

M&L for approved earth fillng under floors (brought from out side defence land ) in layers n exc 25cm thick including watering and well ramming to a true surface complete lead exc 1.5 km but n exc 5 km complete all as specified and as directed.

M&L Rolling and Consolidating formation surfaces 8 to 10 tonnes power roller complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6,type C-1,using 40 mm graded crushed stone aggregates as in sub base of path all as specified and directed.

M&L for chequered cement concrete tiles 20cmx20cmx25mm thick,set jointed and pointed in neat cement slurry in floors,and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L providing precast cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregates as in copings, kneelers, apex stones, pier caps, bed plates, pintle blocks, anchorage blocks, corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar 1:4 complete with joints to match complete all as per specified and directed.

Material and labour PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Supply and fix posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets for securing wire mesh etc including all necessary drilling bolting or rivetting etc confirming to Fe-290 or 310 complete all as specified and directed.

Supply and fix hard drawn steel wire fabric oblong mesh chain link fencing of wire mesh size of opening 100 x 150 mm (4mm dia of wires for cross and 7mm dia of wires for main) thick including line wire as per sladers rail straining bolt etc including provn of binding 10 to 12 mm dia of bars complete all as specified and directed.

Mild steel in flat, round or square bars (Fe 410-W (Gde-E-250) quality in available lengths complete all as specified and as directed.

Supply and fix mild steel screw (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15 cm long but n exc 22.5 cm long of 12 mm dia complete all as specified and as directed.

Supply and fix in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

S&F Galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with coatch screws and washers in roofs, 0.63 mm thick m Gde-o quality, with 120 grms/sqm zinc coating and Gde 'B' (i.e 12.5 mm ) corrugation, complete, all as specified and as directed.

S&F 0.80 mm thick plain, galvanised, mild steel sheeting (ISI Marked) grade 'O' with minimum 120 grms/sqm for zinc coating in ridges, hips, valley gutters, drip and straight flashings, fixed with coatch screws and washers complete all as specified and as directed.

M&L for preparation of old steel and steel based surfaces of any description exc 10cm with or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Fixing only 2nd class soft wood clean sawn timber fixed in scantling complete all as specified and directed.

Supply and fix Plywood 6mm thick grade BWR type BB fixed with nails to timber frame work commercial type as in ceiling fixed with nails complete all as specified and directed.

Supply and fix Plywood 6mm thick grade BWR type BB fixed with screws to timber frame work commercial type as in wall fixed with nails complete all as specified and directed.

Supply and fix 2nd class soft wood sec area n exc 3 Sqcm plain fillets, square, rectangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete, all as specified and as directed.

Supply and fix 35 mm thick 2nd class soft wood glazed and skelton shutters open rebated and prepare to receive glass or gauge etc edges of framing plain chamfered fixed to chowkats, SSR-2010 Part-I clause 8.24(a) complete all as specified and directed.

Supply and fix 30 mm thick 2nd class soft wood glazed and skelton shutters open rebated and prepare to receive glass or gauge etc edges of framing plain chamfered fixed to chowkats, SSR-2010 Part-I clause 8.24(b) complete all as specified and directed.

Supply and fix GI wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm and fixed with wire staples complete all as specified and directed.

Supply and fix 3 mm thick sheet glass of ordinary quality 3.0mm thick and glazing with oil putty in squares n exc 0.5Sqm in each pane complete all as specified and directed.

Supply and fix 125mm Aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

Supply and fix 125 mm size aluminium handles cast type anodised all complete all as specified and directed.

Supply and fix 75 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all specified and directed.

Supply and fix 300mm mild steel ordinary rat tail rod pattern spring including roller plate complete all as specified and directed.

Supply and fix floor door stopper of alumium body and tongue anodised with land drawn steel spring overall lengthof cover plate 140mm fixed with screw, complete all as specified and directed.

Material and labour for preparation of old wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Material and labour brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster of any description on brick or concrete walls ,ceiling etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

M&L 75 mm thick plain cement concrete 1: 3: 6 type C-2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as per specified and directed.

M&L non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed or bedding layer of mortar in CM 1:6 complete all as specified and directed.

M&L for Vitrified coloured ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exc 0.36 sqm in floors set and jointed in neat cement slury and pointed in white or coloured to match the tiles over 15 mm thick screed bed or bedding layer of mortar 1:6 for layig floor finish complete all as specified and as directed

M&L 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in flooring finished even and smooth with out using extra cement complete all as specified and as directed.

Supply of 3 mm thick glass dividing strips, width 38 mm and inserted in position conforming to design complete, all as specified and as directed.

Taking down carefully existing aluminium point wiring on batten or in conduit with GI earth wire etc (for light/fan/socket/power point) complete and making disturbed surfaces of wall/floor/ ceiling etc good to match with existing complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm copper conductor cable (multistrand) PVC insulated FRLS (unsheathed), surface type, drawing in and including PVC concealed conduit 19mm dia, having wall thickness not less than 2 mm with sunk cast iron/pressed steel terminal boxes made out of 1.2mm thick sheet inclluding one coat red oxide primer on internal and external surface covered with 3mm thick hylam brand IS-2036 marked laminated sheet cover (for Mounting switches, sockets, regulators etc), including 1.5 Sqmm PVC insulated (multistrand) FRLS copper conductor continious earth wire for one light/fan point controlled by one switch completed all as specified and directed for the followings:- (a) One light point or one fan point controlled by one switch SP 230 Volts

(b) One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent bd.

(c) One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item No 85 above but using 2.5 sqmm copper conductor cable (multistrand) PVC insulated FRLS (unsheathed) for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green solid copper conductor cable as continuous earth wire with lugs complete all as specified and directed.

S&F Switch piano, flush type single pole, one way 5 Amp all as specified and directed by Engr-in-Charge.

S&F Switch piano, flush type single pole, one way 15 Amp all as specified and directed by Engr-in-Charge.

S&F Socket outlet 2 in 1, 3 pin 5A complete all as specified and directed by Engr-in-Charge.

S&F Socket outlet 2 in 1, 3 pin 5A and 15 amp flush type complete all as specified and directed by Engr-in-Charge.

S&F Lamp holder insulated body PVC/polycarbonate with back plate suitable for batten fitting complete all as specified and directed.

S & F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed.

M & L for point wiring complete with PVC insulated and unsheathed, copper conductor cable Multistrand FRLS single core 1100 volt grade electric cable of 1.5 sqmm (nominal area) in and including concealed rigid PVC conduit/Casing Caping of suitable size as per site requirement including 1.50 sqmm PVC insulated & unsheathed copper cable as continuous earth wire with all accessories including lugs required, complete all as specified and directed for the followings:- Note :- Modular white cover plate with frame and metal flush box will be measured and paid under respective items :- (a) One light point or one fan point controlled by one switch SP 230 Volts

(b) One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent bd.

(c) One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item No 85 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green solid copper conductor cable as continuous earth wire with lugs complete all as specified and directed. Note :- Modular white cover plate with frame and metal flush box will be measured and paid under respective items.

S & F Modular Fan Regulator electronic rotary,0-4 steps step type 100 Watt, 240 Volt 50 Hz hum free 2 module complete all as specified and directed.

Supply and fixing switch modular 6 Amps 230 Volts one way switch.

Supply and fixing switch modular 16/20 Amps 230 Volts way switch.

Socket modular 6 Amps AC 230 Volts 2/3 pin combined 2 module complete all as specified and as directed.

Socket modular 6A/16 Amps-2/3 pin combined AC 230 Volts 2 module complete all as specified and as directed.

S & F Modular white cover plate with frame 3 module and metal flush box 3 module complete all as specified and as directed.

S & F Modular white cover plate with frame 4 module and metal flush box 4 module complete all as specified and as directed.

S & F Modular white cover plate with frame 6 module and metal flush box 6 module complete all as specified and as directed.

S & F LED 10 W (candle /ball type) with B-22 base, complete all as specified and directed. Make -Havells/Wipro/Philips/SYSKA

S & F LED light fitting fixture 20W, 6500K, 2000 lm decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly having power factor >0.95, surge protection 2.5KV energy efficient ready to use complete all as specified. Make-Wipro/Philips/SYSKA

M & L for submain wiring with two single core PVC insulated flexible copper conductor cable of sze 2 x 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 2.5 Sqmm as earth lead in and including PVC conduit/casing and capping and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engr-in- charge. Make of Wire : HPL/L&T/KEI

S & F Sheet Metal enclosure for mounting MCB 8 way AC 230 volts with IP-43 protection double door with 400 amps capacity bus bar including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge .Make Legrand/HPL/Siemens

S & F Sheet Metal enclosure for mounting MCB SPN 4 way AC 240 Volt with IP-43 protection double door with 200 amps capacity bus bar including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge .Make Legrand/HPL/Siemens

S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified. Make Legrand/L&T/Schnider

S&F MCB SPN 40 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified. Make Legrand/L&T/Schnider

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtrs in depth for laying of cables including getting out in any kind of soil complete all as specified and directed. (cable shall be laid 60 cm below ground level )

Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed .

Material and labour for old size brick well burnt, laid flat ,for cable protection complete all as specified and directed.

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed . Make – Ravindra,Oswal,Kinjal.

Supply and lay cable XLPE insulated armoured heavy duty electric cable with aluminium counductor, 1100 volts grade of crosssectional area 25 Sqmm x 3.5 Core.

S&F Recess mounted LED luminaire with complete diffuser 36W , 5700K, 3163 lm Flat Panel Ultra Slim powder coated CRCA housing, heat sink having power factor >0.95, surge proction 2.5 KV complete all as specified. Make-Wipro/Philips/GE

Material and labour for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galavanised iron and earth strip protected by provision of GI light grade pipe 20mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion.

S&F 10 Watt 6000K LED Bulk head luminaries with opal diffuser, etc complete with accessories all as specified and directed.Make - Havells Cat Pt No-LHEOAOP7UZ6W010 or equivalent in Wipro/Philips

S & F Decorative wall mounting, SS finish fixture with frosted glass suitable for B-22 base lamp including LED lamp of 10 Watt complete all as specified as directed. Make Havells Model Arc1 or equivalent in Philips/wipro/GE

M/S MOHAMAD YOUSUF AKHOON AND SONS

M/S AKMAL CONSTRUCTIONS

M/S Bhat Contractors

M/S Gh Qadir

ZAHOOR ENGINEERING WORKS

M/S DFA Enterprises