Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.8 LAccepted-AOC 145 SAINIK NAGAR RAIBARELLI ROAD TELIBAGH LUCKNOW | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹27.9 L+₹1.6 L (6.21%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹28.4 L+₹2.1 L (8.17%)Rejected-Finance GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹28.9 L+₹2.7 L (10.3%)Rejected-Finance 70 SUBHASH ROAD HARJINDER NAGAR KANPUR 208007 | KANPUR | KANPUR | UTTAR PRADESH | 208007 | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹29.5 L+₹3.2 L (12.3%)Rejected-Finance 58 SHAHEED NAGAR OPP BHIMRAO AMBEDEKAR UNIVERSITY RBL ROAD LUCKNOW 226025 UP | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226025 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹34.0 L
EMD Value
₹68,000
Closing Date
1 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (WEST) LUCKNOW
GE(WEST) LUCKNOW PIN 226002 C/O 56 APO
SPL REPAIR TO BLDG NO 1A AND 3A (SINGLE OFFRS ACCN) AT 11 GRRC UNDER GE (WEST) LUCKNOW
2023_MES_612183_1
GE/W/LKO/39 OF 2023-24
Open Tender
Civil Works
Item Rate
90 days
Lucknow
AS PER NIT AND TNEDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE (WEST) LUCKNOW
₹68,000
Yes
19 Sept 2023
4 Aug 2023
4 Sept 2023
4 Aug 2023
1 Sept 2023
18 Aug 2023
4 Aug 2023 - 11 Aug 2023
Amount
Demolition of brick or stone/boulder masonry built in cement or cement lime mortar complete all as specified and as directed.
M & L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick wall in CM 1:4 complete all as specified and as directed.
Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
M & L for rendering 15mm thick in CM 1:6 on brick work or concrete surface and finishing the surface even and smooth complete all as specified and as directed.
M & L for 15 mm thick rendering in CM 1:4 using waterproofing compound @ 3% by weight of cement on fair faces of brick walls or concrete surfaces and finishing surface even and fair complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under respective item.
Taking up or down steel tubing & connection 15mm bore complete all as specified and as directed.
S & F for GI tubing medium grade 15mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Taking up or down steel tubing & connection 20mm bore complete all as specified and as directed.
S & F for GI tubing medium grade 20mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built inCM 1:6 complete all as specified and as directed.
Supply only Water proofing compound conforming to IS 2645 complete all as specified and as directed.
M & L for rendering 5mm thick in CM 1:3 on fair faces of concrete surface and finishing the surface even and smooth without using extra cement as on ceiling complete all as specified and as directed.
M & L Providing precast cement concrete type B0 1:2:4 (12.5mm graded agrregate) set in cement mortar 1:4 as in laouvers and jallies 25mm thick (measured solid) inlcuding all mouldings but excluding frame complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.
M & L for (Ist quality) vitrified tiles 10mm thick, dark shade (Double Charged), square polished, area of each tiles n. exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
M & L for (Ist quality) light coloured vitrified tiles 10mm thick dark shade (Double Charged) as in skirting/dado set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.
M & L for coloured Non -Skid Ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry & pointed in coloured cement to match the surface over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.
M & L for coloured glazed ceramic tiles 300 x 450 x 6-7 mm thick but as on vertical surfaces such as skirting/dado over and including 10mm thick backing coat in CM 1:3 complete all as specified and directed.
Dismantling stone slab and tiles of any description and thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.
M & L 18-20mm thick granite work as in cooking platform, window cills etc bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing complete over and including 20mm thick screed bed and bedding layer of mortar for laying floor finishes with 1:6 cement mortar complete all as specified and as directed.
M & L 18-20mm thick granite work as in partition in cupboards, including cutting, both side polishing and rubbing complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations etc complete all as specified and as directed.
S & F suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.
S & F in repair Bib taps 15mm bore, brass chromium plated fancy type screwed down, high pressure with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S & F in repair for CP stop/angle valves 15mm bore brass screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed.
S & F in repair for 15mm bore CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.
S & F in repair 15mm bore for CP wall mixer for mixing hot or cold water screwed down for iron pipes complete all as specified and as directed.
S & F in repair PVC low level flushing cistern 10ltrs capacity, syphonic action type white with inlet ball valve, float and handle including brackets with 32mm dia flush pipe of polythelene of low or high density complete all as specified and as directed.
S & F in repair WHB vitreous china white flat back size 550x400mm including brackets, Brass CP waste coupling 32mm size and PVC waste pipe complete all as specified and as directed.
S & F in repair vitreous china Water closet pedestal pattern with seat cover white including Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc complete all as specified and as directed.
S & F in repair hand shower (health faucet) with 1m flexible tube with wall hook, bracket etc complete set of superior quality complete all as specified and as directed.
S&F in repairs tubular towel rail 20mm dia D type 60cm long between flange complete all as specified and as directed.
S&F in repair fancy type chromium plated soap dish 100mm size complete all as specified and as directed.
S&F in repair stailnless steel grating doom 100mm dia complete all as specified and as directed.
S & F in repair PVC connection pipe 15mm bore with PTMT nuts of 450mm long complete all as specified and as directed.
S & F in repair Chromium plated shower rose with or without swivel joints 125mm dia with long arm including fixing to steel pipe or union complete all as specified and as directed.
S & F in repair Glass corner self fancy type 250x250 and 10mm thick fixed its brass bracket and screwed complete all as specified and as directed.
S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
S & F in repair looking mirror fancy type decorative pattern 5 to 6mm thick fixed on wall with stainless steel studs complete all as specified and as directed.
S & F in repair 20mm bore gate valves with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and as directed.
S & F in repair Brass CP bottle trap for WHB having minimum water seal of 25mm complete all as specified and as directed.
S & F in repair fancy type brass chromium plated towel ring round with round flange including necessary fittings complete all as specified and as directed.
S & F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and as directed.
S & F stainless steel peg set of 6 pegs of (size of peg 125 to 175mm) fancy type complete all as specified and as directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) area n.exc 1.5 sqm each complete all as specified and as directed.
S&F factory made PVC door frame of section 100 x 45 mm using 5 mm thick prelaminated heat moulded extruded PVC sheet of density 600 kg/Cum and core of section/frame dame solid using MS hollow rectangular tube of size 400mm x 20mm of guage 19 and PVC sheet of density 600 kg/cum. Grame fixed in position using 06 nos 8 mm dia and 100 mm long dash through bolts (anchor fastener) complete all as specified and as directed.
S & F 30mm thick factory made PVC panelled door shutter consisting of Stiles/Rails made out of heat moulded 5mm thick prelaminated PVC sheet of density 600 kg/cum and MS rectangular hollow tube of 40 x 20mm of guage 19 with size of member as given below. Edges/corners of stile/rail chamfered towards panel and panel consisting of 02 Nos panel of 10mm thick (5mm + 5mm) prelaminated PVC sheet of density 600kg/cum complete all as specified and as directed. Sizes of members:- (a) Stiles - 110mm x 30mm (b) Bottom /Top Rail - 135mm x 30mm (c) Lock Rail - 145mm x 30mm
Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 depth of cutting from the face of jamb/wall exc half brick but n. exc one brick complete all as specified and directed.
M & L for PCC type B-1 (1:2:4) 20mm graded aggregate as in hold fasts for bed blocks etc complete all as specified and as directed.
S&F Bands, straps, supports or stays for rain water ventilating pipes including bolts if required, hooks for large gates, hook and pintel hinges, large hasp and staples, chains, hand made sliding bolts, clamps, holdfasts, wall ties, hooks for hanging fans, palin angle cleat for securing purlin to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165 complete all as specified and as directed.
S & F stainless steel grill, guard bars, with ends of bars shouldered and / or riveted or forget into spikes and similar work complete all as specified and as directed.
S & F Factory made single extruded WPC (Wood Polymer composite) solid door/window/ceosetory windows and other frames / chawkhat of size 65 x 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade) Calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (Max toxicity index 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws havinf min frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) & 1100N (Edge), min compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof water / moisture proof and fire retardant and fixed in position with MS hold fasts / lugs/ stainless steel dash fasternersof required dia and length complete all as specified and as directed.
S & F 30mm thick factory made single extruded WPC (Wood polymer composite) solid panel flush door shutter comprising of virgin polymer of K Value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives having maximum density of 650kg/cum and screw withdrawl strength 50N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water / moisuture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed countersunk stainlesss steel screws complete all as specified and as directed.
S & F Factory made single extruded WPC (Wood Polymer composite) solid door/window/ceosetory windows and other frames / chawkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade) Calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (Max toxicity index 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws havinf min frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) & 1100N (Edge), min compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof water / moisture proof and fire retardant and fixed in position with MS hold fasts / lugs/ stainless steel dash fasternersof required dia and length complete all as specified and as directed.
S & F 300 mm long fancy type brass, sliding door bolt with sand or die cast brass hasp & staple (bolt type) and fixing bolts with rolled or drawn brass bolts and fixed complete all as specified and directed.
S & F factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and as directed. (a) Area not exceeding 2.00 sqm each (Note: The unit rate quoted by contractor include the cost of glass and all other connected accessories. Net Opening will be measured for payment purpose.)
S & F stainless steel hinges 100mm size and fixed complete all as specified and as directed.
S & F in repair 18mm thick factory made 100% solid WPC flush shutter (for cupboard and vanity etc) made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400 kg/cum and density of central core not less than 600 Kg/cum, manufacturer by an ISO 9001/2015 certified company all as specified and as directed.
S & F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.
S & F 0.9 mm thick decorative laminates type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction complete all as specified and as directed.
S & F 30 mm width of flaps continuous piano hinges MS bright finish are electroglavanised complete all as specified and as directed.
S & F 100mm size hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed.
S & F in repair PVC cupboard shelf / partition/frame/ shutter 18mm thick side of panel externally impact perfect finish to the shutter and jointed together with solvent cement adhesive 8mm thick (4mm x 2) x 12mm wide PVC sheet is used as gap insert for top and bottom rail, 18mm x 1mmPVC edge lipping is done on top and bottom side using PVC solvent cement adhesive etc complete all as per direction by Engr-in-charge, manufacturer's specification complete all as specified and as directed.
S & F 150mm long fancy type extruded brass handle polished for door shutter complete all as specified and as directed.
M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S & F 35mm thick Second class hard wood (sal) glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc,without shash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specifed in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chawkhats complete all as specified and as directed.
S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
S & F in repair 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed.
S & F Curtain rod made of stainless steel fancy type with brackets including all fittings etc complete all as specified and as directed.
M & L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in roof kerbs, benching, coping, padding, kneelers complete all as specified and as directed.
S & F 200mm long fancy type brass barrel towerbolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.
S&F Aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 140mm complete all as specified and as directed.
S&F in repair Aluminium (Die cast) body Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed
M & L for preparation of new plastered surface of wall and applying minimum 1mm thick of wall care putty over prepared surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed. Note: Primer and emulsion shall be carried out through air less spray machine ( Machanical means) complete all as specified and as directed.
M & L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.
M & L for prepration of new surface of wall and applying three coat of white wash complete all as specified and directed.
M & L for preparation of old treated surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.
M & L for prepration of old treated surface of wall and applying two coat of white wash complete all as specified and as directed.
M & L for complete removal of existing treatment on wall /roof projectios including facia, cornices etc by scrapping with mechanical sander (Having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean free from dust, loose paint etc by skilled labour and applying minimum 1mm thick of wall care putty over prepared surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed. Note: Primer and emulsion shall be carried out through air less spray machine ( Machanical means) complete all as specified and as directed.
M&L Applying two coats of plastic emulsion paint over a coat of birla putty including preparartion of newly plastered untreated surface complete all as specified and directed.
Complete removal of existing treatment and applying two coats of plastic emulsion paint over a coat of birla putty complete all as specified and as directed.
S & F Anodised aluminium door frame powder coated for door, windows, ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and as directed.
S & F anodised aluminium window and ventilator powder coated shutters top hung type without sash, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150mm long (1 No) hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified and as directed.
M & L for 10mm thick rendering on fair faces of brickwork or concrete surface in CM (1:3) including finishing the surface even and fair using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions complete all as specified and as directed.
M & L for provision of roof treatment with polymeric water proofing membrane all as given below :- (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non oven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M & L for two coats of aluminium paint on membrane surface complete all as specified and as directed.
M & L for preparation of old wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thick (below or above ground level) complete all as specified and as directed.
M & L for 75 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base etc complete all as specified and as directed.
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade laid over 25mm thick sand cushioning and joint filled with fine sand incl levelling, tamping and sweeping etc complete all as specified and as directed.
M&L for chequered cement concrete tiles coloured glossy finish rubber moulding with mixture of white cement and pigments of size 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry in fooors incl 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.
M & L for exterior grade cement concrete tiles of Ist quality 10-12mm thick as in floors/ pavings area exc 0.11 Sqm and n. exc 0.18 Sqm each etc sett and jointed in neat cement slurry and pointed with mixtured of white cement and pigment over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes with 1:4 cement mortar complete all as specified and as directed.
Taking down carefully aluminium conductor point wiring (light, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately)and making good disturbed surfaces of walls, floors, etc. to match with the existing good disturbed surfaces of walls, floors etc. match with the existing complete all as specified and as directed.
M & L for Point wiring complete with 1.5 sqmm PVC (FRLS) insulated stranded copper conductor single core cable drawn through rigid non metalic PVC conduit and conduit accesseries concealed in walls/ceiling, electrogalvanised pressed steel modular metal flush box 1/2 module to 8 module concealed in wall duly painted with two coat of black bituminous paint over a coat of red oxide primer along with white cover plate with plate up to 12 module for housing modular switches, and sockets 1.5 sqmm PVC insulated (green insulation copper conductor) earth continuity cable drawn with wiring and connected to common earth dolly complete all as specified and as directed.
Ditto all as above item No -94 hereinbefore but but socket outlet point 5 amps on independent board complete all as specified and as directed.
Ditto all as above item No 95 hereinbefore but one socket outlet point on same baord complete all as specified and as directed.
Ditto all as above item No 94 hereinbefore but one bell point controlled by one, one way Switch complete all as specified and as directed.
M & L for Point wiring complete with 2.5 sqmm PVC (FRLS) insulated stranded copper conductor single core cable drawn through existing rigid non metalic PVC conduit and conduit accesseries concealed in walls/ceiling, electrogalvanised pressed steel modular metal flush box 1/2 module to 8 module concealed in wall duly painted with two coat of black bituminous paint over a coat of red oxide primer along with white cover plate with plate up to 6 module for housing modular switches, and sockets 2.5 sqmm PVC insulated (green insulation copper conductor) earth continuity cable drawn with wiring and connected to common earth dolly complete all as specified and as directed.
S&F modular switch, single pole, 1 way 5/6 Amp, 230 Volts, 1 module complete all as specified and as directed.
S&F modular switches single pole, 1 way 15/16A, 230 V,1 module complete all as specified and as directed.
S&F modular socket, single pole, 5 pin 5/6 Amp, 230 Volts, combined 2 module complete all as specified and as directed.
S&F modular socket, single pole, 5 pin 15/16 Amp, 230 Volts, combined 2 module complete all as specified and as directed.
S&F modular bell push single pole one way 5 Amp, 240 volt fuesh type complete all as specified and as directed.
S&F modular call bell AC single pole 240 volt ding dongType complete all as specified and as directed.
S & F ceiling rose surface bakelight two to three terminal complete all as specified and as directed.
Supply & fix modular fan regulator 120W, 2 Module for ceiling fan fixed, in board and connecting as directed, after dismantling and removing unserviceable regulator complete all as specified and as directed.
S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and as directed.
S&F modular rotary step type fan regulator, single pole, 120 W, 2 module, complete all as specified and as directed.
S&F modular white cover plate with frame, 1 module complete all as specified and as directed.
S&F modular white cover plate with frame, 3 module complete all as specified and as directed.
S&F modular white cover plate with frame, 6 module complete all as specified and as directed.
S&F modular white cover plate with frame, 8 module complete all as specified and as directed.
M&L for sub main wiring comprising two single core, 4 Sq mm nominal cross sectional area multi on same copper conductor cable, PVC insulated FRLS Grade unsheathed 1100 Volts grade drawing in and over PVC conduits and conduit fittings complete (concealed type) including S&F 4 Sq mm nominal cross sectional area on same copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and as directed. (Cutting chases and making good of disturbed surfaces shall deem to be including in the unit rate quoted by tendered)
S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 6 sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and as directed. Note : One unit length shall measured as two run of main wire and one run of conduit & earth wire. Note for item No 113 & 114 : 2 runs of cable and one run of PVC conduit shall be deemed to be included in the rate quoted for one unit length.
S&F sheet metal enclosure for MCB DB double door type, single pole and neutral (4+2) way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and as directed.
Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20/22 W, 6500 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver, 25k burning hours ,2.5 KV surge protection complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge Note: Makes shall be provided group-I cat as per latest approved make given by HQ CECC
S&F in repairs of reccessed type square LED 10/12W downlighter 6500K 2.5 KV inbuit surg protection minimum 110 lumens/watt, 50k burning hours aliminium PDC all as per specified and directed. Note: Makes shall be provided group-I cat as per latest approved make given by HQ CECC
S&F in repair LED Building security light 20/25 Watt with high power LED source (>100 lumen/watt) PDC housing, IP66 and IK 07 with 4 KV inbuilt surge protection ,minimum 50000 burning hours hv cutoff@325/440 volt protection for 8 hours including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories , as specified and directed by Engr-in-charge. Note: Makes shall be provided group-I cat as per latest approved make given by HQ CECC
S & F in repairs integrated LED type Post top lantern with high power 25/30 W LED as light source, energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution,spun auminium landscape lumainaire incl LED driver complete and incl neceesary electrical connection all as directed Make: Havells Ruby clear with cat Part No.RUBYPT25WLED757PSYMTOPC / Bajaj ARIAN cat no BGCTN 25W LED WW / Halonix with cat part no. HLPT-01-30-CW
Supply and fix wall mounting fans 400 mm (white) string controlled oscillating type including provn of flexible three core cable from ceiling rose to terminal for making connection, fitting on wall including all necessary fixing accessories complete all as specified and as directed .
S&F sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and as directed.
S&F in replacement of sheet metal enclosure (MCB DB) single phase and neutral with 200 Amps rated bus bar (8+2) way double door type , 240 volts complete all as specified and as directed.
S&F MCB, triple pole & neutral 63 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and as directed.
S&F MCB, single pole & neutral 32-40 Amp, 230 volts, 10 KA breaking capacity, 'C' curve complete all as specified and as directed.
Supply and fixing modular ac box power unit with socket plug top and MCBs with a two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed.
S&F MCB SP 6 to 32 Amp 240 volts 10 KA breaking capacity complete all as specified and as directed.
Supply and fix modular type blanking plates, one module complete all as specified and as directed.
Taking down carefully ceiling fan/exhaust fan of any size and type and refixing the serviceable fans in its original or new location complete all as specified and as directed.
Taking down carefully meter of any type and refixing the same its original or new location complete all as specified and as directed.
Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V , minimum 100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrngements all as per specified and directed by Engr-in-charge.Note: Makes shall be provided group-I cat as per latest approved make given by HQ CECC
S& F in repair Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 7/9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Make Phillips Model Grace / Bajaj / Havells decorative model Floretine WL 1LS B22 SS ( Note: Rates incl 01X 7/9 W LED Bulb with each fitting)
Supply and fixing exhaust/fresh air fan 250 mm sweep (white) plastic body with louvers including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall including all necessary fixing accessories complate all as specified and as directed.
S&F in replacement 1100V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection ,one twin core cable flat or circular strande 10 sqmm aluminiuam conductor complete all as specified and as directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers ® including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall including all necessary fixing accessories complate all as specified and as directed.
M & L of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of char coal and salt PCC chamber, reassed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 1991 print complate all as specified and as directed.
ANIL CONSTRUCTION
QUALITY CONSTRUCTIONS CO
M/S SHIVA CONSTRUCTION
M/S S S A ASSOCIATES
EVEREST CONSTRUCTION
M/S Vindhya Infraventures
KUMAR ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .