CERTAIN REPAIR TO SEWAGE LINES , MANHOLES/ SEPTIC TANK / SOAKAGE WELLS ETC AT 213 TRANSIT CAMP JAMMU AND WATER PROOFING TREATMENT , SUNKEN FLOOR ETC TO CERTAIN BUILDINGS AT NAGROTA UNDER GE NAGROTA

Amount

LIST OF WORKS TO BE CARRIED OUT UNDER AGE B/R- II AT NAGROTA STATION Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spots etc and applying one coat of white wash on walls after filling any hole with putty complete all as specified & directed

All as per ser item No 2 above but applying one coat of white wash on ceiling complete all as specified & directed.

All as per srl item No 2 above but applying one coat of cement base paint on walls complete all as specified & directed

All as per srl item No 2 above but applying two coat of cement base paint on walls complete all as specified & directed.

All as per item No 02 above but applying one coat of exterior emulsion paint on plaster surfaces on chajjas/band/facia/balcony etc upto four storied bldg complete all as specified and directed

M&L for preparation of old painted plastered wall surface and applying two coats of exterior emulsion paint (Comoflized pattern) complete all as specified and directed.

M&L for Complete removal of existing treatment and applying and applying two coats of oil emulsion distemperusing using high efficiency hydralic pump with minium 270cc motor and oil alert and silver plus airless gun spray as manufacture instruction (of approved shade) over one coat of primer over and incl applying 1 to 2mm thick wall care putty over upto three storey building incl necessary scaffolding complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of walls applying One coats of oil emulsion distemper using high efficiency hydrailic pump with mnium 270cc motor and oil alert and silver plus airless gun spray as manufacture instruction (of approved shade) over upto three storey building incl necessary scaffolding complete all as specified and directed.

Preparation of old decorated plastered or unplastered surfaces ( upto 21 Mtr height from GL ) Over head tank (OHT) by brooming down or by steel wire brushes, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spots etc and applying Two Coats of Cement base Paint on wall surface, Synthetic enamel paint to steel surface and Writing letters or figuers SAVE WATER SAVE ELECRICITY with thick synthetic enamel paint on top dome (Block Roman, Italic or Indian) of size 30 cm high) (of approved shade) including all necessary Scuffolding/shuttering etc. complete all as specified and directed. Note : The work is to be carried out for overhead reservoirs & the contractor quoted Rates includes all safety measurers required at site / as directed by GE / Engineer-in- Charge for complete safety of Labour during execution of work

Preparing of previously painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

Preparing of previously painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

Taking down cement plaster on brick or stone walls, etc .including raking out joints, hacking for key, scrubing down with water etc complete all as specified & directed.

M&L rendering 5mm thick in cm (1:3)as in ceiling , soffit of chajja etc.finished even & smooth complete all as specified & directed.

M & L preparing new plastered surfaces of ceiling chajjas facia etc. and applying three coats of white wash complete all as specified & directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 without using extra cement complete all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified & directed.

Preparing new plastered surfaces of wall and applying two coats of cement based paint over one coat of primer complete all as specified & directed.

M&L for Preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over 1 to 2 mm thick wall care putty over a coat of primer on walls using high efficiency hydrailic pump with mnium 270cc motor and oil alert and silver plus airless gun spray as manufacture instruction complete all as specified & directed.

Dismantling Plain or Corrugated steel sheeting, any guge, thickness in roof covering and removing from site of work complete all as specified

S& F 0.50mm thick Pre painted galvalume aluminium zinc coating GI based corrugated steel sheeting with colour having tensile strength 550Mpa as in roof covering /Cladding to wall fixed with self tapping screws as specified. and 15cm end lap fixed with'L' type or 'J' type hook bolt (08mm dia) complete all as specified & directed.

S& F 0.50mm thick Pre painted galvalume aluminium zinc coating GI based Plain steel sheeting with colour having tensile strength 550Mpa as in roof covering /Cladding to wall fixed with self tapping screws as specified. and 15cm end lap fixed with'L' type or 'J' type hook bolt (08mm dia) complete all as specified & directed.

M & L for Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and directed

S& F Mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) complete all as specified and directed

M & L preparation of new or previously untreated surfaces with one coat of Red oxide and two coats of synthetic enamel paint over one coat of red oxide primer ordinary tint on surfaces of any description over 10 cm in width or grith, not otherwise described.

S&F for 0.63mm thick Galvanised with grade of zinc coating 275, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type cranked hook bolts complete all as specified & directed.

S&F for 0.63mm thick plain, gavanised with grade of zinc coating 275, mild steel sheeting, in ridges and flashings complete all as specified & directed.

M&L for Preparing of newly steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint Over coat of Primer on Roof sheet after degalvanising of sheets complete all as specified and directed

Taking down chowkhats or frames with shutter (without taking off shutters from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified & directed.

S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 105 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats complete all as specified & directed.

S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats complete all as specified & directed.

M&L 35 mm thick 2nd class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), complete all as speciied.

S&F 35mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive gauge etc without sash bar but with lock rail fitted with cut and mitered beads complete all as specified & directed..

S & F Box type Steel windows side hung double shutters (inside for wiremesh & out side for glass), incl guard bars made out of 10mm square bar ,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS complete all as shown on drawing No- CEUZ/TD/1302/09 sheet No- 1/3 to 3/3 complete all as specified & directed..

S&F butt hinges, medium weight cold rolled mild steel 100mm long complete all as specified & directed.

S&F 150mm long aluminium handles cast type, anodised and fitted complete all as specified & directed.

S&F aluminium anodized barrel tower bolt of extruded section 150mm long. complete all as specified & directed.

S&F aluminium alloy, anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast as or extruded sections and fixing bolt and sliding bolt of extruded section 250mm long complete all as specified & directed..

M&L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth complete all as specified & directed.

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and aerage width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples to all dorr/window/vent shutters complete all as specified & directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc. 0.50 sqm in each pane complete all as specified and directed.

Taking down CI/PVC pipes 100 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc complete all as specified and directed.

Taking down CI/PVC pipes 75 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc complete all as specified and directed.

S&F UPVC (SWR) Type-B, pipes single socketed, 110 mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F UPVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F UPVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, fix in wall with and incl suitable size of MS calmpsa / nuts-bolts complete all as specified and directed.

S&F UPVC (SWR) Type-B bends, 75 mm dia / bore any radius complete all as specified and directed.

S&F UPVC (SWR) Type-B bends, 110 mm dia / bore any radius complete all as specified and directed.

S&F UPVC (SWR) Type-B junction single, 75mm (Single T) equal or unequal complete all as specified.

S&F UPVC (SWR) Type-B junction single, 110 mm (Single T) equal or unequal complete all as specified and directed.

WORK TO BE CARRIED OUT UNDER AGE B/R I AT 213 TRANSIT CAMP JAMMU Cleaning/clearing of sewage line (including manholes except 1st manhole) 100mm to 350mm bore of any description under ground any depth, removing any type of blockage including desilting, descaling and de-chocking from drain with combined high pressure water jetting cum suction (vacuum) type machine mounted on LMV/HMV having facility of high pressure vacuum including provision of hydraulic application through high pressure thermoplastic fiber based water jetting hose and through conical round shaped nozzle pipe and flushing after cleaning including clearing of manhole, sludge water shall be disposed of directed including taking of manhole cover and re-fixing the same after cleaning complete all as specified & directed.

Dewatering/Desludging & cleaning of manhole of any depth, any size, taking out water mixed with sludge and solid sludge including any foreign materials such as stones, tree hedges etc, removing and depositing sludge at a distance not less than 20 meter in a pit including necessary excavation of pits and covering with earth & spraying unslaked lime on the covered pitch as well as around the manholes to make hygienic including necessary flushing of manholes with water after desludging complete all as specified and directed.

Taking out/Pumping out contaminated sewage water from septic tank/soakage well including inlet/outlet chamber after plugging incoming sewage line through combined high pressure water jetting cum suction (vaccum) type machine mounted on HCV Honey succer vehicle of capacity not less than 6000 ltrs each and facility of high pressure vaccum and removing off the same in the pit to a place complete all as specified and directed. . Note : One lorry unit will be considered for full load of 6000ltrs irrespective of taking out.

Desludging the solid sludge from septic tank, soakage well including inlet/outlet chamber, removing out all scum, silt reduce sludge (both organic/inorganic nature) after plugging the incoming sewage line through combined high pressure water jetting cum suction (vacuum) type machine mounted on LMV/HMV and facility of high pressure vacuum and removing and dumping off the same in the tank to a place out side cantonment at the place marked for the purpose by local municipality or area controlling authority complete all as specified and directed.

Cleaning of soil waste pipe (cast iron/PVC )75/100mm bore laid in ground any slope or gradient and depth 3 mtr by roding taking out all residue from the lines/manholes including water and depositing at a distance not less than 20 mtr in pit finally covering the ditch with earth and spraying unslacked lime on the covered ditch as well as around the manholes to make hygienic including excavation of ditch testing of line by flushing water after cleaning etc complete all as specified and directed by Engineer-in-Charge.

Cleaning/clearing of IWC/ EWC, gully trap /floor trap including CI pipe / PVC pipe upto first manhole by roding, taking out all residue including waste and testing by pouring water after cleaning etc complete all as specified and directed by Engr-in-Charge. (Note: Cleaning of PVC/CI pipe from first floor / ground floor embedded in floor or fixed to wall included in this item) complete all as specified and directed.

S&F Cast iron oval access covers / inspection cover with bolts rubber gasket to make it water tight for 75mm/100mm bore CI fittings including taking out broken/ unserviceable cover with bolts etc and removing from site complete all as specified and directed.

S&F SFRC Manhole Cover of size 1200X500X65mm thick with angle Iron Frame set in CM 1:4 complete all as specified and directed.

Excavation in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5m wide for foundation etc or for shaft, wells, cesspits, manhole, pair house etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth and getting out in any type of soil complete all as specified and directed.

Returning filling in including, spreading, leveling watering and well ramming in layer not exceeding 25cm in each layer complete all as specified and directed.

Removing excavated material not exceeding 50 M and depositing where directed at level not exceeding 1.5m above the starting pointing complete all as specified and directed.

M & L Plain cement concrete 1:4:8 as in foundation type D-2 (using 40mm graded crushed stone aggregate) as in fdn filling or mass concrete complete all as specified and directed.

M & L Plain cement concrete 1:2:4 type B-1( using 20mm graded aggregate) as in benching, coping including watering slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Demolition of brick work or stone masonry, built in CM including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified & directed..

M & L Brick work with sub class B (old size) brick straight or curved on plan exc 6 m mean radius in CM 1:4 complete all as specified.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed

M & L TMT mild steel bars 10MM dia and over cut to length bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire annealed 0.9 mm dia or securing with clips complete all as specified and directed

M & L Precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in manhole/drain slab cover all as specified and set in CM 1:4 complete all as specified and directed

M&L for Rendering 15mm thick in two layers [base layer 10mm in CM 1:4 & finishing layer 5mm thick in cement mortar (1:4)] using water proofing compound in 2nd layer only on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement complete all as specified & directed. Note : WPC shall be measured and paid separately.

Supply only water proofing compound complete all as specified and directed

Demolition and breaking up 150mm dia drain pipes (Salt glazed ware, AC or reinforced concrete ) complete all as specified & directed.

Demolition and breaking up 200 mm dia drain pipes (Salt glazed ware, AC or reinforced concrete ) complete all as specified and directed

M & L Concrete bed to drain pipes laid in trenches including packing under and haunching against the sides of pipes aftaer they are laid and tested in cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate for 150mm bore pipe, complete all as specified & directed.

M & L Concrete bed to drain pipes laid in trenches including packing under and haunching against the sides of pipes aftaer they are laid and tested in cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate for 200mm bore pipe, complete all as specified & directed.

M & L for Salt -Glazed stoneware drain pipes 150 mm dia laid in trenches and jointed complete all as specified & directed.

M & L for Salt -Glazed stoneware drain pipes 200 mm dia laid in trenches and jointed complete all as specified & directed.

M & L Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or ¼ section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching for 150mm dia of pipe complete all as specified & directed.

S&F in repair Vitreous china squatting pan of 'Orissa pattern' long pan size 580 x 440 mm white with integral foot rest incl ‘P’ or ‘S’ trap and flush pipe etc complete incl making good the floor complete all as specified & directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white "P or S Trap" , excluding flushing cistern & flush pipe complete all as specified & directed.

S&F in repair 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle inluding brackets complete all as specified & directed..

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for like MH cover, bdrain pipe bed, hard standing etc complete all as specified.

M & L 75mm thick PCC 1:3:6 Type B2 ( 40 mm graded aggregsate) as in subbase and pavings complete all as specified & directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified & directed.

M&L for Machine pressed precast conctete interlocking paver block of M-40 Grade any shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and pigment, complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and , removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

M&L glazed ceramic coloured tiles 300x200x7mm / 450x300x7mmthick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles including and over over 10mm thick backing coat plastering in CM (1:4) complete all as specified & directed.

M & L Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exc 0.11 sqm but n. exc 0.18 in floor etc and jointed with cement slurry and pointed with white or coloured cement to matchwith tiles over and incl 15mm thick screed bed in CM 1 : 6 complete all as specified & directed.

M & L 75 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement complete all as specified & directed.

M & L 15mm thick screed or screed bedding in cement mortar 1:4 as a sub base to Chequered tile complete all as specified & directed.

M & L Cement concrete chequered tiles of size 30 cm x 30 cm x 20-22 mm thick, set, jointed and pointed in neat cement slurry (with grey cement and pigment) as in floors complete all as specified and directed.

Dismantling/taking down CI/PVC/AC pipes of exc 50mm dia with all including fittilngs complete all as specified and directed

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 110mm bore size fixed with suitable size of clamps / nuts-bolts complete all as specified & directed

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floor of 110mm bore size complete all as specified & directed..

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 75 mm bore size fixed with suitable size of clamps / nuts-bolts complete all as specified & directed..

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floor of 75mm bore size complete all as specified & directed..

S&F PVC (SWR) bends of 110mm bore complete all as specified & directed..

S&F PVC (SWR) bends of 75 mm bore complete all as specified & directed..

S&F PVC (SWR) Branch Piece double equal or unequal of 110mm bore complete all as specified & directed..

S&F PVC (SWR) Branch Piece double equal or unequal of 75 mm bore complete all as specified & directed..

M & L for 100mm dia Cast iron pipes with flanged ends, centrifu?gally cast, class A, in any length laid in trenches incl testing complete all as specified and directed.

M & L for 80mm dia Cast iron pipes with flanged ends, centrifu?gally cast, class A, in any length laid in trenches complete all as specified and directed.

M & L for upto 150mm bore Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified and directed.

S&F in repair stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays incl bolt and nuts securing ends of stays to wall or roof for 75mm bore complete all as specified and directed. .

S&F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incl bolt and nuts securing ends of stays to wall or roof of 100mm bore.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed.

S&F in repair 100mm bore CI floor trap with grating including jointing CI pipe in run lead, cutting holes in walls and making good surface in cement concrete surface type B-1 (1:2:4) complete all as specified & directed.

S&F 75mm bore CI floor trap with grating including jointing CI pipe in run lead, cutting holes in walls and making good surface in cement concrete surface type B-1 (1:2:4) complete all as specified & directed.

S&F 100mm bore CI Nahani trap with grating including jointing CI pipe in run lead, cutting holes in walls and making good surface in cement concrete surface type B-1 (1:2:4)

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc complete all as specified & directed..

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified & directed.

Cleaning of all types of blockage of Nahni traps/floor traps/bottle traps, blockages of WC's, rain water pipes and similar works complete all as specified & directed. Notes :- 1. Labour shall be provided by the contractor on daily basis from 9:00 AM to 5:00 PM with all Tools and Plants. 2. The Contactor / his representative shall take/ note all complaints from the Complaint Cell daily and attend/ reactify the same on same day by deploying sufficient labours as required for complain/ complaints , failing which a panelity of Rs 500.00 per complaint will be recovered from ontractor's due paymnet & decision of GE shall be final and bildung to Contractor . 3. Futhermore, the feedback for reactifying the complaint shall be given by the contractor/ his representative to concened JE from all aspect.

Nitika electricals and engineers works

M/S MANISHA BUILDERS

ASHFAQ AHMED MANHAS