West Bengal

Active

Works

Electrical Work/ Equipment

ED/Crematorium/04/26-27

MUNICIPAL AFFAIRS DEPARTMENT

HMC AREA | Howrah, West Bengal

Amount: ₹49.4 LCloses: 14 Oct 20262d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published23 Sept 2026
Closes14 Oct 2026
Bid Opening27 Oct 2026

Tender Value

₹49.4 L

EMD Value

₹98,857

Closing Date

14 Oct 2026, 6:00 pm2d left

Tender Inviting Organisation

Name

EXECUTIVE ENGINEER

Address

4,M.G.ROAD HOW-1

Work Description

Supply, Installation and Commissioning of Air Pollution Control System at Shibpur Burning Ghat for Electric Crematorium units. DLP- 1 Year

Tender Information

Tender ID

2026_MAD_1042738_1

Reference Number

ED/Crematorium/04/26-27

Tender Type

Open Tender

Product Category

Electrical Work/ Equipment

Form of Contract

Percentage

Period of Work

60 days

Location

HMC AREA

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

5 documents required · 5 mandatory

Fee/PreQual/Technical

RequiredNIT (.pdf)

RequiredEMD AND TENDER FEES (.pdf)

RequiredTENDER BOOK (.pdf)

RequiredBIDDER DOCUMENTS (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹5,500

EMD Fee Amount

₹98,857

Important Dates

Last Activity

23 Sept 2026

Published

23 Sept 2026

Bid Opening

27 Oct 2026

Download Starts

23 Sept 2026

Download Ends

14 Oct 2026

Submission Starts

23 Sept 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (23 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Supply and fixing of the Roller bearing in the shaft of blower (SKF make 22312E/C3) Ref: UD & MA/Elec.- Mech. Works/2018/Page-42/1-21.	4	Nos	12,218	₹48,872
2	IMPELLER (12000 CU M/HR CAPACITY): Manufacture, Supply. Fitting and fixing S.S.-304 grade impeller of 635 mm dia. X 110 mm width in overall dimension. Welded with 12 nos. skewed fins/blade (size: 175mm x 100mtin x 4mm thickness) at 30° Angle on the impeller centre point with Back plate and Front plate. Size of Back plate and front plate is (635mm dia. x 6mm thickness) respectively. After Fitting, Fixing of shaft with impeller dynamically balance for smooth air discharge capacity 12000 cu. m. /hr Ref: UD & MA/Elec.- Mech. Works/2018/Page -42/1-22.	2	Nos	42,304	₹84,608
3	Supply and fixing of Adapter Sleeve with oil groove(H313/PC) for 25 HP I.D. Fan/Blower (specially for APC devices of Wooden Pyres) Ref: UD & MA/Elec.- Mech. Works/2018/Page-44/1-41.	2	Nos	765	₹1,530
4	Supply and fixing the tough "V" belts of sizes (ECODRIVE make)-B98 Ref: UD & MA/Elec.- Mech. Works/2018/Page-44/1-46.	6	Nos	877	₹5,262
5	Supply and fixing the mess of main pipe and branch pipe of 1.D 40 m.m. and 25.4 mm respectively to be welded horizontally & nos at both side of main pipe as per overall dimension inside of pre-color (1800 mm / 1200 mm) having tapped whole suitable to thread of S.S/Brass nozzle to be 24 hos in one stage of both side made from S S 304 medium gauge nine Ref: UD & MA/Elec - Mech. Works/2018/Page-45/1-55.	2	Nos	12,077	₹24,154
6	Supply and fixing the water injection nozzle in form of cork screw or like end auger of dimension 80 mm height x 25.4 mm dia hexagonal tapered having thread at one side with 4mm dia drill hole centrally in which water may be spared wildly spirally like fly wheel at a normal pressure of water complete machining and testing Ref: UD & MA/Elec - Mech. Works/2018/Page-45/1-54.	72	Nos	1,307	₹94,104
7	PALMER BLOCK: a) Supply. Titting and fixing C.I palmer block for suitable to EN-24. 60 mm dia shaft including proper alignment and fixing in the pedestrian of the blower for thee run of impeller. Ref: UD & MA/Elec.- Mech. Works/2018/Page-42/1-20(a).	2	Nos	13,018	₹26,036
8	Supply, and fixing of 2 HP Centrifugal Monoblock pump Make- KSB, AGRIBLOC 20-5050 Ref: UD & MA/Elec.- Mech. Works/2018/Page-44/1-35.	6	Nos	12,803	₹76,818
9	Supply and fixing of 450 mm dia SS-304 Damper of 2 mm thick plate with both end flanges Ref: UD & MA/Elec.- Mech. Works/2018/Page-4/1-56.	8	Nos	23,618	₹1,88,944
10	DESIGN, SUPPLY AND DELIVERY AT SITE, INSTALLATION, TESTING AND COMMISSIONING OF PRECOOLER MADE OF 3M THICK SS 304 OF DIMENSION 1200MM DIA X 5000MM HIGHT INCLUDING LADDER, PALTFROM, ETC, AND LABOUR CHARGES IN ALL COMPLETE AS PER TECHNICAL SOECIFICATION AND DIRECTION OF E.I.C. Ref:KMC Approved Rate.	2	Nos	5,74,054	₹11,48,108

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.42 MB

Tendernotice_2.pdf

PDF • 6.12 MB

Work Item Documents

BOQ_2559146.xls

BOQ • 0.33 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Supply and fixing of the Roller bearing in the shaft of blower (SKF make 22312E/C3) Ref: UD & MA/Elec.- Mech. Works/2018/Page-42/1-21.

Nos

12,218

₹48,872

IMPELLER (12000 CU M/HR CAPACITY): Manufacture, Supply. Fitting and fixing S.S.-304 grade impeller of 635 mm dia. X 110 mm width in overall dimension. Welded with 12 nos. skewed fins/blade (size: 175mm x 100mtin x 4mm thickness) at 30° Angle on the impeller centre point with Back plate and Front plate. Size of Back plate and front plate is (635mm dia. x 6mm thickness) respectively. After Fitting, Fixing of shaft with impeller dynamically balance for smooth air discharge capacity 12000 cu. m. /hr Ref: UD & MA/Elec.- Mech. Works/2018/Page -42/1-22.

Nos

42,304

₹84,608

Supply and fixing of Adapter Sleeve with oil groove(H313/PC) for 25 HP I.D. Fan/Blower (specially for APC devices of Wooden Pyres) Ref: UD & MA/Elec.- Mech. Works/2018/Page-44/1-41.

Nos

765

₹1,530

Supply and fixing the tough "V" belts of sizes (ECODRIVE make)-B98 Ref: UD & MA/Elec.- Mech. Works/2018/Page-44/1-46.

Nos

877

₹5,262

Supply and fixing the mess of main pipe and branch pipe of 1.D 40 m.m. and 25.4 mm respectively to be welded horizontally & nos at both side of main pipe as per overall dimension inside of pre-color (1800 mm / 1200 mm) having tapped whole suitable to thread of S.S/Brass nozzle to be 24 hos in one stage of both side made from S S 304 medium gauge nine Ref: UD & MA/Elec - Mech. Works/2018/Page-45/1-55.

Nos

12,077

₹24,154

Supply and fixing the water injection nozzle in form of cork screw or like end auger of dimension 80 mm height x 25.4 mm dia hexagonal tapered having thread at one side with 4mm dia drill hole centrally in which water may be spared wildly spirally like fly wheel at a normal pressure of water complete machining and testing Ref: UD & MA/Elec - Mech. Works/2018/Page-45/1-54.

Nos

1,307

₹94,104

PALMER BLOCK: a) Supply. Titting and fixing C.I palmer block for suitable to EN-24. 60 mm dia shaft including proper alignment and fixing in the pedestrian of the blower for thee run of impeller. Ref: UD & MA/Elec.- Mech. Works/2018/Page-42/1-20(a).

Nos

13,018

₹26,036

Supply, and fixing of 2 HP Centrifugal Monoblock pump Make- KSB, AGRIBLOC 20-5050 Ref: UD & MA/Elec.- Mech. Works/2018/Page-44/1-35.

Nos

12,803

₹76,818

Supply and fixing of 450 mm dia SS-304 Damper of 2 mm thick plate with both end flanges Ref: UD & MA/Elec.- Mech. Works/2018/Page-4/1-56.

Nos

23,618

₹1,88,944

DESIGN, SUPPLY AND DELIVERY AT SITE, INSTALLATION, TESTING AND COMMISSIONING OF PRECOOLER MADE OF 3M THICK SS 304 OF DIMENSION 1200MM DIA X 5000MM HIGHT INCLUDING LADDER, PALTFROM, ETC, AND LABOUR CHARGES IN ALL COMPLETE AS PER TECHNICAL SOECIFICATION AND DIRECTION OF E.I.C. Ref:KMC Approved Rate.

Nos

5,74,054

₹11,48,108