Revamping Crew Rest House and Rest Room providing Air Conditioning units and LED Street lights etc in Bodi Depot of Dindigul Region TNSTC MADURAI Ltd

Towards the labour Charges for removing the Existing Damaged Tiles surface on Wall and Flooring of toilet and also including the charges for disposing the debris as directed by Departmental officers etc complete

Towards the labour Charges for dismantling and removing the existing damaged IWC in the toilet and also including the charges for removing the existing brick jelly concrete and the filling materials as directed by the Departmental officers etc complete.

Towards the labour Charges for dismantling and removing the existing damaged Urinal closet with its waste pipe line and stacking carefully as directed by the Departmental officers etc complete.

Towards the labour charges for dismantling the existing damaged toilet Woodern /PVC door and also including the charges for replastering the damaged surface with Cement Mortar 1:3(one cement three sand) as directed by the Departmental officers etc complete.

Brick / stone masonry in cement mortar walls under 3 meters high -W-0015 SSR, W-0015 SSR for GF, W-0016 SSR for FF, W-0017 SSR for SF

Terracing work in roof or floor

Brick work-GF

Brick work-SF

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting Old Wall surface with two coats of wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying , fabricating and fixing in position Aluminium Anodised natural colour mat finish Two track sliding window in all floors with Aluminium sections of outer Frame bottom 62x37mm x 1.50mm at 1.218 kg/m,the Side & Top 62x31.50x1.50mm at 0.778 kg/m,Shutter Top 40x18x1.5 at 0.38 kg/m,Bottom 40x18x1.5 at 0.38kg/m, Side Vertical 40x18x1.50mm at 0.493 kg/m, Vertical locking section 40x29x1.5mm at 0.632 kg/m, with necessary accessories such as rubber beadings, special hinges, lock, handle including supplying and fixing 4mm thick plain glass including cost of all materials , labours, power consumption required for fabrication , drilling holes in RCC colunm, slab, masonry walls wherever necessary with power drills to the required extent and make good to the original condition after fixing and also as directed.The aluminium sections are to be anodised with matt finish under electrically controlled in accordance with IS 1868 / 1962 for an average anodic film thickness 15 microns etc., complete.

Cables and Under ground cable provision (4 core 16 sq mm aluminium under ground cable)

4 sq mm submersible cable

14 mm nylon rope

Barbed fencing (1. Stone Post Hight=7 Ft, 2. Stone Post Size =4"X4" Thick, 3. Barbed fencing 3 layers, 4. Stone laying at Distance of 8 Feet)

Basic total