ADDN/ALTN TO CERTAIN LIVING BILLETS PROVN OF SHED FOR DG SET AND PEST CONTROL AND ATT AT AF STN GORAKHPUR

Amount

Demolition of brickwork built in cement mortar including quoins, arches, pillar etc, complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Excavation in trenches in any kind soil not exceeding 1.5 metre wide & not exceeding 1.5 metre depth for foundation etc and getting out, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed

Removing excavated material to a distance exc 250M and deposited where directed at a level n. exc 500 M above the starting point complete all as specified and as directed.

M/L PCC type D2 1:4:8 (40 mm graded aggregate) as in foundation complete all as specified and as directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4, complete all as specified and directed.

M&L for rendering 15mm thick on faces of brick work or concrete surfaces CM 1:4, and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying two coat coat of weather coat paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coat coat of weather coat paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for rendering 15mm thick on faces of brick work or concrete surfaces CM 1:6, and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coats oil bound distemper over one coat of primer over 1mm thick birla white wall care putty complete all as specified and as directed.

M&L for complete removal of existing treatment of wall and applying two coats of white wash on wall complete all as specified and directed.

Taking down chowkats with shutters exceeding 1.5 Sqm but n. exc 4 sqm each ( without takig off shutters from the frames), complete all as specified and directed.

Second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed.

M&L for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc, complete all as specified and directed.

M&L for 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinged pin, anodised and fixed, type C-21, complete all as specified and directed.

M&L 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed, complete all as specified and directed.

M&L Extruded aluminium alloy handles, fabricated type, anodised 150 mm size, complete all as specified and directed.

S&F aluminium anodised barrel tower bolt extruded section 150 mm long, complete all as specified and directed.

M&L stainless steel steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F 300 mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for preparation of new wooden surfaces and applying two coat synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of old surfaces of steel and applying one coat of synthetic enamel paint, complete all as specified and directed.

S&F in repair stainless steel harrison rails/ curtain rod fancy type 25 mm dia including bracket, stops, rollers etc complete all as specified and directed complete.

Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floor,wall, aprons etc complete all as specified and directed.

M&L in Machine cut Plolished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15mm thick screed bed in CM(1:6), complete all as specified and directed.

M& L for Mirror polishing of kota stone flooring complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n. exc 15cm thickness (below or above GL), complete all as specified and directed.

M&L for 75mm thick cement concrete type B-2 1:2:4 (using 40 mm graded stone aggregate) as in plinth protection finished surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection finished surface even and smooth without using extra cement, complete all as specified and directed.

S&F powder coated (thickness of powder coating not less than 50 micron) aluminium partition with aluminium sections weighting not less than 0.55 kg/mtr including jointing cleat for fixing, glazing clips, rubber packing, anodised aluminium snap beading, screws, glazing with 6mm thick aluminium composite panels etc, complete all as specified and directed.

Excavation in post holes ( or similar holes) in soft/loose soil each n. exc 0.50 Cum getting out, watering and removing surplus soil to a distance n. exc 50 m and making good surface complete all as specified and directed.

M&L for PCC 1;2:4 type B1 using 20mm gragded stone aggregate for post hole, complete all as specified and directed.

M&L for angle iron post and struts in fencing including cutting tops to shape as directed, drilled holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.)including all necessary drilling,bolting or riveting screws, etc and similar work, complete all as specified and directed.

Supply & fixing chain link MS galvanised fencing any size or type as required complete all as specified and directed. (Note: Weight of chain link fencing shall be decided by a BOO).

S & F MS 10 mm dia round bar and fixed independently to angle iron for chain link fencing cut to length, bend to shape reqd and directed including taking down old rusted part complete all as specified and directed.

M&L for preparing new surfaces of iron and iron based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide complete all as specified and directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standared rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel pins, etc as directed (each line wire to be measured), complete all as specified and directed.

S&F in repairs 610mm dia punched tape concertina coil (effective dia 550mm at stretch length of coil 6m) with two handle and spikes at both end of coil with dovetail clips 18 SWG, including razor wire 7 No, 6m length of each wire medium size, barbed length 20mm width 14mm, including 51 pins, 128 nos of clips in each coil including 230gm/Sqm zinc coating on core wire complete all as specified and directed.

Dismantling wall and ceililing boards (fibre, pulp, insulation etc. ) or insulation boards/ slabs/ blankets, any thickness, including cover fiilets complete all as specified and directed.

S & F in repair suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Grade E-250) Quality-A, complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed.

M&L for Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping scews, complete all as specified and directed.

M&L for Pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping scews, complete all as specified and directed.

S&F expended metal cut to length bent to shape required and tying with incl. Annealed maild steel wire not less than 0.9 mm dia or fixing with galvanised steel steples and weight exc. 4Kg /sqm etc, complete all as specified and directed.

M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, cooler stand and other similar work, complete all as specified and directed.

M&L for ATT Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc, complete all as specified and directed.

M&L for ATT for soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc, complete all as specified and directed.

M&L for ATT At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same etc, complete all as specified and directed.

Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out hard/dense soil, complete all as specified and directed.

M&L Hard core of guage Broken stone or boulders nexc 63mm,deposited,spread and levelled in layers n exc15cm thick watered and rolled/rammed to a true surface, complete all as specified and directed.

M&L 60mm thick Machine pressed precast concrete interlocking paver block (Coloured) any shape and size conforming to IS 15658 -2006 M-35 Grade, complete all as specified and directed.

M&L 30mm thick sand cussoioning under interlocking tiles, complete all as specified and directed.

M&L Type B0 1:2:4 (12.5mm graded aggregate) Providing cement concrete in roof kerbs or mud stops rounded or chamfered on edges, complete all as specified and directed.

S&F aluminium work for earthing strip or other work directed by Garrision Engineer complete all as specified and directed.

Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses, lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces, complete all as specified and directed.

Taking down carefully Old unserviceable any type sub main wiring with wooden batten/PVC surface conduit of any size and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces, complete all as specified and directed.

Taking down carefully Main switch and Distribution boards any make and size, complete all as specified and directed.

Taking down and Re fixing carefully ceiling fan/Exhaust Fan of any sweep and size, complete all as specified and directed.

S&F in replacement of ceiling fan rod by 10" 'Gold Life' smart MS down rod (Anti suicide Fan Rod) white colour for ceiling Fans of any size and make complete all as specified and directed.Make-Gold Life Smart Fan down Rod HSN/SAC code 8414 or equivalent as approved, complete all as specified and directed.

Taking out & removing old burnt-out winding and rewinding of motor of ceiling fans 1200 mm sweep of any description and rewinding of fan motor with appropriate size super enameled copper wire approx 200 gram including insulating material such as illumines paper, letherized paper, cotton tape, glass sleeving, insulating varnish,painting,servicing,cleaning etc testing at workshop and transportation to site, connecting and testing on full load to the entire satisfaction of the department for the following Fans:- Make of winding wire: Atlas/Finolex/ Devi Dayal

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed. Cat Part No.GHWEMGSWH050 of Havells or equivalent in Racold, C.G.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of size 20 Amps 'C' series, complete all as specified and directed.

M&L for submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed as required of size 2x4.0 sq. mm+1x4.0 sq. mm earth wire, complete all as specified and directed.

M& L for GI Tubes, medium grade, galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors of size 15mm bore, complete all as specified and directed.

M/L for hot and cold water stainless steel geyser connection pipe (set of two) of length 18 inches, complete all as specified and directed.

M&L for stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle , screwed both ends for iron pipe or for unions and fixed of size 15mm, complete all as specified and directed.

M&L Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

M&L Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed of size 15mm bore.

M/L for Sub Main Wiring with two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and 6.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :- Two Nos of 6.0 Sqmm Wire and One No of 6.0 Sqmm Earth wire in One RM length Measured as one unit length.

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces, complete all as specified and directed. (a) One light point controlled by one switch.

(b) One C/fan/E/fan point controlled by one switch, complete all as specified and directed.

(c One socket point controlled by one switch on same board, complete all as specified and directed.

(d) One socket point controlled by one switch on Independent board, complete all as specified and directed.

Description all as per item No 72 here in befor but with 1100 volts grade copper standard conductor cable of size 2.5Sqmm with 2.5Sqmm solid copper conductor PVC for 3 pin switch socket outlet15Amp independent board, complete all as specified and directed.

M/L for Modular Switch piano flush type AC 230 volts 6 Amps single pole one way, complete all as specified and directed. Make- Anchor, Plzaa, Leader.

M/L for Modular socket outlet 6 Amps 2/3 pin and AC 230 volts flush type complete all as specified and directed by Engineer in charge Make- Anchor, Plzaa, Leader.

M/L for Modular Switch socket combination 3 pin 16 Amps AC 230 volts flush type, complete all as specified and directed. Make- Anchor, Plzaa, Leader.

M/L for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type, complete all as specified and directed. Make- Anchor, Plzaa, Leader.

S & F fan regulator Modular type step 120/280 watt capacity of polycarbonite, complete all as specified and directed. Make- Anchor, Plzaa, Leader.

S&F lamp holder PVC/Polycarbonate type body, with back plate for batten fitting, complete all as specified and directed. Make- Anchor, Plzaa, Leader.

S&F LED Lamp 7 Watt capacity, complete all as specified and directed. Make- HPL ,Havells, Philips, Surya, Bajaj.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

S & F Sheet metal enclosure DBs Triple Pole and Neutral 4 way double door type with 415 Volts rated IP 43 -IK 09 with acrylic door bus bar, complete all as specified and directed. Make- Legrand, L&T,ABB

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning, complete all as specified and directed. (i) TPN 40 to 100 Amps

S & F Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door, complete all as specified and directed. Make- Legrand, L&T, ABB

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (i) SPN 40 to 63 Amps

S & F MCB single pole 240 volts 5 to 30 Amps, C Series, complete all as specified and directed. Make- Legrand, L&T, ABB (i) SP 5 to 32 Amps

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Supply ,laying and testing cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following size 25 Sqmm 3.5 core, complete all as specified and directed.

M&L for sand cushioning for protection of underground cable, consolidated and compacted with clean dry sand, complete all as specified and directed.

M&L for laying of bricks common burnt clay building bricks, sub class 'B' designation 75, complete all as specified and directed.

M/s Comfort Air Conditioning and Refrigeration Engineers

m/s allied enterprises

M/s Mahendra Construction

M/S B.P. CONSTRUCTION

sanjay enterprises

M/S GUPTA TRADERS