35(W)/EDCH/2024-25

Amount

FOR CARRYING OUT THE VARIOUS LINE WORKS AND OTHER ASSOCIATED WORKS, DUE TO GARH GANGA KARTIK MELA, UNDER THE JURISDICTION OF EDSD-II GARH OF EDD- GARHMUKTESHWER, UNDER EDC., HAPUR

Carriage of all petty material of estimate, from Electricity store center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Resagging of loose L.T./H.T. line of ASCR Conductor and completion work properly, as per RESPO/Norms and as per direction of site incharge.

Resagging of loose L.T. line of ABC Conductor and completion work properly, as per RESPO/Norms and as per direction of site incharge.

Laying , Stringing and final sagging of ACSR weasel conductor and completion work properly, as per RESPO/Norms and as per direction of site incharge.

Laying, Stringing and final sagging of ACSR Dog conductor and completion work properly, as per RESPO/Norms and as per direction of site incharge.

Re-straightening of Tilted Pole after digging of pit of suitable size adjustment of PCC/ST Poles and completion work properly, as per RESPO/Norms and as per direction of site incharge.

Cutting of tree branches along the route of the line and disposal of the same at suitable places and as per direction of site incharge.

Providing & fixing of New Bamboo Spacer in L.T/HT mains, as per direction of site incharge.

Repair of damage/broken/rusted existing fancing of T/F with bamboo and balli complete in all respect as per RESPO/Norms and as per direction of site incharge.

Providing and fancing of T/F DP/Four Pole by Bamboo 8 to 10 feet long with all accessories complete in all respect as per RESPO/Norms and as per direction of site incharge.

Repair and replacement of damaged stay and concreting of stay with all accessories complete in all respect as per RESPO/Norms and as per direction of site incharge.

Guarding of 11KV Line & repair of damaged guarding with all accessories complete in all respect as per RESPO/Norms and as per direction of site incharge.

Repairing of broken/rusted pole at site by digging the base of round pole/joist approx. 3' depth straightening of pole in rest position by welding work including dismantling of L.T/H.T. line sagging and resagging after welding & refling the base of pole with sand, concrete and cement. Welding work by providing 1 mtr. long four pieces of M.S Angle 50x50x6 mm and 2 nos. M.S. Round ring in each pole of 12 mm thick for smooth working and Grouting of the same pole/supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge.

BANTI SINGH ELECTRICALS CO