construction of Pathway, and repair and painting of railing, gate and kiari and installation of jhulla and benches at tagore park geetanjali complex, ward 28, z-08

Amount

construction of Pathway, and repair and painting of railing, gate and kiari and installation of jhulla and benches at tagore park geetanjali complex, ward 28, z-08

Accupressure Tiles

SIMPLE SLIDE AGE GROUP - 6 TO 12 YEAR SEFTY PLAY AREA - 14*4 FIT, L - 8 FIT H- 7.5 FIT, STRUCTURE - 50 MM, 32 MM, 25 MM OD CR PIPE, SLIDE - F.R.P. MATERIAL 4 TO 5 MM THICK, PLATE FORM BASE - 5X6 MM FRP, 1.5 Ft. WOULD BE BURIED UNDER THE GROUND WITH CEMENT CONCRETE BASE COLOR ON IRON IS PRIMER AND THEN DOUBLE COAT OF COLOR (ASIAN PAINTS)

Sea Saw

Merry go round (Disc type) 4' Dia, 2.5'height

Double Swing

PremiuPremium Adults Air Walker Technical Specifications · Length: - 2200mm x Width: - 2100mm x Height: -1430mm, Safe Area: - 2.0meter x 1.8meter. · Premium Adults Air Walker equipment made up of ‘’B’’ class GI pipe of different NB. NB stands for Nominal boar size i.e. internal diameter of pipe in millimeters. * Make of GI Pipe will be of Tata, Jindal, and Swastik. * The main frame structure pipe is 80 NB for Both Side in Arch Shape. *Center Handle frame is made up of 25 NB. * Footrest GI. Pipe is 40NB. * Especially Design Profiles is cuts with plasma cutting. * The pins used are made up of N 8 material ø 25mm., to build bushes are used are seamless pipe of 60mm OD & 6mm thickness. * Prime stand supporting bush Dia. 125 NB. *Main Paddle support bearing bush made of G.I 125NB. * Instruction board- Support structure is made up of 1.8 mm thickness MS plate. * Peddle Movement restricted by specially designed mechanism (Interlocking). * Instruction sticker Printed on PETG sheet with UV resistance. * The footrest made from aluminum casting material & Size is 125 x 305 x 5mm with the support of 250mm x 115mm x 3mm thickness MS plate. * The foundation for fixing is structure and made form center pipe of G.I. of 80 NB with 40mm x 20mm x 3mm thickness pipe also used. Main pipe supported with 25mm x 25mm MS angle of 3mm thickness. * Base plate are made up of MS round plate ø250. * Foundation Covering Cap is made up of FRP/Roto material of Dia. 295mm. * High tensile steel with galvanized nuts & bolts are used for assembly. * The bearing are used ‘‘6205’’ permanent lubricated bearings & the bearings are used reputed brand (SKF/FAG). * Locking the circlips A24 used for assembly. * The powder coating is done with pure polyester powder

Premium Adults Big Turning Wheel Technical Specifications • Length: - 1450mm x Width: - 1930mm x Height: -2230mm. * Safe Area: - 1.9 x 1.9 meter. • Premium Adults Big Turning Wheel made up of "B" class GI pipe of different NB. NB stands for Nominal boar size i.e. internal diameter of pipe in millimeters. * Make of GI Pipe will be of Tata, Jindal, and Swastik. * The main frame structure pipe is 80 NB for Both sides in curve shape. * The ring frame Size is 25 NB made from "B" class of G.I. pipe. * Big Ring 2 Nos Connection link is 25 NB made up of "B" class of G.I. pipe. * Wheel connecting pipe is 32 NB made of "B" class of G.I. pipe. * The nitrogen hardness pins used are made up of N 8 ø 25mm. * Especially Design Profiles is cuts with plasma cutting. * To build bushes are used are seamless pipe of 60mm OD & 6mm thickness. * The foundation for fixing is structure and made form center pipe of G.I. of 80 NB with 40mm x 20mm x 3mm thick pipe also used. Main pipe supported with 25mm x 25mm MS angle of 3mm thickness. * Instruction board- Support structure is made up of 1.8 mm thickness MS plate. * Instruction sticker Printed on PETG sheet with UV resistance. * Base plates are made up of MS round plate ø250. * End Caps in SS Material are used to cover the bushes. * High tensile steel with galvanized nuts & bolts are used for assembly. * The bearings are used "6205" permanent lubricated bearings the bearings are used reputed brand (SKF/FAG). * The circlips A24 used for assembly. * The powder coating is done with pure polyester powder of Ackzonoble or Berger with 60 to70 micron thickness.

Premium Adults Surf Board Technical Specifications · Length: - 2300mm x Width: - 3300mm x Height: - 1740mm. * Safe Area: - 1.39 x 1.27 meter · Premium Adult Surf Board equipment made up of ‘’B’’ class GI pipe of different NB. NB stands for Nominal boar size i.e. internal diameter of pipe in millimeters. * Make of GI Pipe will be of Tata, Jindal, and Swastik. * The main frame structure pipe is 80 NB in Arc Shape. * Handle frame is made up of 25NB. * The paddle frame is made up of 32NB of "B" class of G.I. pipe. * The Nitrogen hardness pins used are made up of N 8 ø 35mm., to build bushes are used are seamless pipe of 70mm OD & 6mm thickness. * Prime stand supporting bush Dia. 125NB. * Main Paddle support bearing bush made of G.I 125 NB. * Instruction board- Support structure is made up of 1.8 mm thickness MS plate. * Peddle Movement restricted by specially designed mechanism. * Instruction sticker – Printed on PETG sheet with UV resistance. * Especially Design Profiles is cuts with plasma cutting. * The footrest made from aluminum casting material 350mm x 210mm x 5mm. With the support of 250mm x 150mm x 3mm thick MS plate. * The foundation for fixing is structure and made form center pipe of G.I. of 80 NB with 40mm x 20mm x3mm thick pipe also used. * Main pipe supported with 25mm x 25mm MS angle of 3mm thickness. * Base plates are made up of MS round plate ø250. * Foundation Covering Cap is made up of FRP material of Dia. 295mmHigh tensile steel with galvanized nuts & bolts are used for assembly. * The bearings are used ‘‘6207’’ permanent lubricated bearings. Bearings are used reputed brand (SKF/FAG). * The circlips A34 used for assembly. The powder coating is done with pure polyester powder of Ackzonoble or Berger with 60 to70

Premium Adult Leg Press Double Technical Specifications · Length: - 2440mm x Width: - 2900mm x Height: - 1600mm. * Safe Area: - 2.8 x 1.4 meter. · Premium Adult Leg Press Double equipment made up of ‘’B’’ class GI pipe of different NB. NB stands for Nominal boar size i.e. internal diameter of pipe in millimeters. * Make of GI Pipe will be of Tata, Jindal, and Swastik. * The main frame structure pipe is 80 NB in Arch Shape. * The outer frame is 25 NB made from "B" class of G.I. pipe. * Footrest on Rest of MS. Square pipe is 50 x 50 mm. * The nitrogen hardness pins used are made up of N 8 ø 35mm. * The seat and back rests are fitted on the outer frame are made up of high quality of fiber plastic material of size 335mm x 310mm x 3mm thickness. * Prime stand supporting bush Dia. 125NB. * Main Paddle support bearing bush made of G.I 125NB, to build bushes are used are seamless pipe of 60mm OD & 6mm thickness. * The footrest made from aluminum casting material 125 x 305 x 5mm thick. With the support of 250mm x 115mm x 3mm thick MS plate. * The footrest frame is made of 25 NB of "B" class of G.I. pipe. * Especially Design Profiles is cuts with plasma cutting. *Instruction board- Support structure is made up of 1.8 mm thick MS plate. * Seat Movement restricted by specially designed mechanism (Interlocking). * Instruction sticker – Printed on PETG sheet with UV resistance. * The foundation for fixing is structure and made form center pipe of G.I. of 80 NB with 40mm x 20mm x3mm thick pipe also used. Main pipe supported with 25mm x 25mm MS angle of 3mm thickness. * Base plates are made up of MS round plate ø250. * Foundation Covering Cap is made up of FRP material of Dia. 295mm. * High tensile steel with galvanized nuts & bolts are used for assembly. * The bearings are used ‘‘6205’’ permanent lubricated bearings. Bearings are used reputed brand (SKF/FAG). * The cerclips A24 used for assembly. The powder coating is done with pure

Premium Adult Chest & Seated Press Technical Specification · Length: - 1840mm x Width: - 3260mm x Height: -2400mm, * Safe Area: - 3.0meter x1.7meter · Premium Adult Chest & Seated Press made up of ‘’B’’ class GI pipe of different NB. NB stands for Nominal boar size i.e. internal diameter of pipe in millimeters. * Make of GI Pipe will be of Tata, Jindal, and Swastik. * The main frame structure pipe is 80 for both sides in curve shape. * Handle frame is made up of 32 NB. * The connecting pipe is made of 25 NB. * Prime stand support pipes is made up of 50mm x 50mm sq. pipe with weather proof powder coating. * To build bushes are used are seamless pipe of 60mm OD &6mm thickness. * The foundation for fixing is structure and made form center pipe of G.I. of 80 NB with 40mm x 20mm x3mm thick pipe also used. Main pipe supported with 25mmx 25mm MS angle of 3mm thickness. * Especially Design Profiles is cuts with plasma cutting. * The seat and back rests are fitted on the outer frame are made up of high quality of fiber plastic material of size 335mmx310mmx3mm thickness. * Instruction board- Support structure is made up of 1.8 mm thick MS plate. * Instruction sticker – Printed on PETG sheet with UV resistance. * The nitrogen hardness pins used are made up of N8 ø25mm & ø17mm material. * Base plate are made up of MS round plate ø250. * Bearing Closing SS caps are used to cover the bushes. * Foundation Covering Cap is made up of FRP material of Dia. 295mm. * High tensile steel with galvanized nuts & bolts are used for assembly. * The bearing are used ‘‘6205’’& ‘‘6203’’ permanent lubricated bearings. Bearings are used reputed brand (SKF/FAG). * The cerclips A24 & A16 used for assembly. * The powder coating is done with pure polyester powder of Ackzonoble or Berger with 60to70 micron thickness.

Premium Adult Twister of Seat & Stand Position Technical Specification · Length: - 2860mm x Width: - 2860mm x Height: -1290mm. * Safe Area: -3 x 3 meter · Premium Adult Twister of Seat & Stand Position made up of ‘’B’ class GI pipe of 65NB, 25NB & 80NB. * Make of GI Pipe will be of Tata, Jindal, and Swastik. * The main frame pipe is 80 NB. * The ring frame is 25 NB made from "B" class of G.I. pipe. * Connection link is made up of 25 NB & of "B" class of G.I. pipe. * The nitrogen hardness pins used are made up of N8 ø30mm. * To build bushes are used are seamless pipe of 70mm OD & 6mm thickness. * The footrest frame is made of 32 NB of "B" class of G.I. pipe. * The supporting frame is made of 25 NB of "B" class of G.I. pipe. * The twister plate is fitted on the supporting frame is made up of 65 NB G.I. Pipe. Ø300mm x8mm thickness M.S. round plate &for supporting plate is ø150mm x8mm thick. * Especially Design Profiles is cuts with plasma cutting. * The foundation for fixing is structure and made form center pipe of G.I. of 89 NB with 40mm x 20mm x3mm thick pipe also used. Main pipe supported with 25mmx 25mm MS angle of 3mm thickness. * Instruction board- Support structure is made up of 1.8 mm thick MS plate. * Instruction sticker – Printed on PETG sheet with UV resistance. * Base plates are made up of MS round plate ø250. * Foundation Covering Cap is made up of FRP material of Dia. 295mm. * High tensile steel with galvanized nuts & bolts are used for assembly. * The bearings are used ‘‘30206’’ permanent lubricated bearing & also "6206" is used. * The circlips A29 used for assembly. The powder coating is done with pure polyester powder of Ackzonoble or Berger with 60 to70 micron thickness.

CONSTRUCTION OF PAGODA/GAZIBO/SHED CONSTRUCTION OF GAZIBO I/C CONCERTE, EXCAVATING AND CONSTRUCTION OF FOOTING BASE WEATHER PROOF PAITING AND ANY OTHER REQUIRED WORK ALL ACCORDING TO SPECIFICATION DRAWINGS AND DIRECTION OF ENGINEER INCHARGE.

Bidder Name

Amount

R K CONSTRUCTION (GSTN-23DFHPS8690F1ZZ) BID ID -1193345

Khalsa Exports Private Limited (GSTN-09AABCK3696G1Z9) BID ID -1193842

A S CONSTRUCTION (GSTN-NA) BID ID -1193421

R K CONSTRUCTION (BID ID -1193345)

A S CONSTRUCTION (BID ID -1193421)

R K CONSTRUCTION (BID ID -1193345)

A S CONSTRUCTION (BID ID -1193421)