PROVISION OF VEHICLE WASHING RAMP, MT STORE AND BARBER SHOP AT H 2 PLOT OF ICGS RATNAGIRI

Amount

Excavation over areas not exceeding 1.5 metre in depth and getting out in soft/disintegrated rock complete all as specified and as directed.

Excavation over areas exceeding 1.5 metre and not exceeding 3 metre in depth and getting out in soft/disintegrated rock complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, toe walls, kerb stones etc. not exceeding 10 sqm on plan and not exceeding 1.5 metre in depth and getting out hard/dense soil complete all as specified and as directed

Material & Labour for Plain Cement Concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations, filling and mass-concrete complete all as specified and as directed.

Removing excavated material exceeding 250 metre but not exceeding 500 metre and depositing where directed where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 centimetre in hard/dense soil complete all as specified and as directed

Material and labour for machine cut laterite stone masonry wall exceeding 10 centimetre in width of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in Cement Mortar 1:4 complete all as specified and as directed.

Material & Labour for Anti Termite Treatment to treat the soil under plinth protection or top surfaces of filled earth at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

Material & Labour for Anti Termite Treatment to treat the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and as directed.

Material & Labour for Anti Termite Treatment to treat the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.

Material & Labour for Broken stone Broken or Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material & Labour for 100mm thick Plain Cement Concrete 1:4:8 type D2 using 40mm aggregate as in sub base complete all as specified and as directed.

Material & Labour for 50mm thick Plain Cement Concrete 1:2:4 type B1 using 20mm aggregate as in base course complete all as specified and as directed.

Material & Labour for Formwork to sides of concrete foundations, footings, bases of columns, raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Material & Labour for Formwork to sides of concrete pillars, posts, struts, piers, columns, and stanchions complete all as specified and as directed.

Material & Labour for Formwork to sides and soffits of floor or roof beams, beam haunching’s, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished concrete flat surfaces complete all as specified and as directed.

Material & Labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal or sloping) for rough finished concrete flat surfaces complete all as specified and as directed.

Material & Labour for Mild steel TMT bars 10mm dia and over of grade Fe 550D, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material & Labour for Mild steel TMT bars 5mm dia and over up to and including 10mm dia of grade Fe 550D,in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipss complete all as specified and directed.

Material & Labour for RCC M-30 grade using 20mm graded aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Material & Labour for RCC M-30 grade using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

Material & Labour for RCC M-30 grade using 20mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and as directed.

Material & Labour for RCC M-30 grade using 20mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed.

Material & Labour for pre-polished 20 to 25mm thick machine cut Kota stone slab flooring over with and including screed bedding layer of mortar 20mm thick in Cement Mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc, complete all as specified and as directed.

Material & Labour for Rendering 10mm thick in Cement Mortar 1:6 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing finished even and smooth (without using extra lime or cement) complete all as specified and directed.

Material & Labour for Rendering 20mm thick (15mm +5mm with water proofing compound) in Cement Mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing finished fair and even complete all as specified and directed.

Supply only liquid water proofing compound.

Material & Labour for preparation of new plastered surfaces of walls and applying two coats of Distemper oil emulsion over a coat of chalk white primer etc complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and as directed.

Material & Labour for rendering 20mm thick in Cement Mortar 1:4 on fair faces of laterite stone masonry surfaces for laying Dado/wall cladding complete all as specified and directed.

Material & Labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. Note: The granite stone slabs of 1st quality available in the market and as approved by Engineer-in-charge having mirror finish and uniform grains.

Material & Labour for rounding to edges of granite and marble stone slabs one edge, such as in copings, steps, cooking platform, and other similar situations complete all as specified and as directed.

Material & Labour for 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water / moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary Stainless-Steel screws shall be paid separately)

Supply & Fix Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ clerestory window & other Frames/ Chowkhats of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Mild steel hold fast/ lugs or Stainless-Steel dash fasteners shall be paid for separately. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply & Fixing of Aluminium alloy, anodised, sliding door bolt 150mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply & Fixing of Butt hinges,100mm sizes extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

Supply & fixing of extruded aluminium alloy handles, fabricated type, anodised, 150mm fabricated type anodised complete all as specified and as directed.

Supply & Fixing of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections, three or four track section, appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, Chromium Plated brass/ stainless steel screws, wheel section for sliding etc. all complete as per architectural drawings and colour, texture of the powder coatings as per the directions of Engineer-in-Charge.

Supply & Fixing of Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, wheel section for sliding etc. all complete as per architectural drawings and colour, texture of the powder coatings as per the directions of Engineer-in-Charge.

Supply & Fixing of sheet glass 5.5mm thick and glazing with provided with aluminium cleats for securing in squares exceeding 0.5 sqm in each pane complete all as specified and directed.

Material & Labour for Chequered cement concrete tiles 30 cm X 30 cm x 25 mm thick, with mixture of white, grey cement in equal proportions set, jointed and pointed in neat cement slurry in floors over 20 mm thick screed bed in Cement Mortar (1:4) with texture, colour and design patterns as approved by Engineer in charge. complete all as specified and as directed.

Material & Labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application having seven course type as per clause 11.43 on SSR Part 1 complete all as specified and as directed.

Material & Labour for Reinforced cement concrete (nominal mix) in 1:2:4 type B1 using 20mm graded stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed.

Supply & Fixing of 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

Supply & Fixing of 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

Supply & Fixing of self closing pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15 mm bore etc complete all as specified and directed

Supply & Fixing of chromium plated stop valves for bore diameter of pipe 15mm, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply & Fixing of Brass chromium plated bottle traps for wash basins, 32mm bore of trap with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

Supply & Fixing of counter top vitreous China wash basin, white, flat back, size 580x450mm, (for hospital use) including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pip, taps, chain and plug and porcelain stopper but including brackets complete all as specified and as directed.

Supply & Fixing of Rotational moulded polyethylene water storage tanks 1000 litre (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Supply & Fixing 25mm bore diameter Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and as directed.

Supply & Fixing 32mm bore diameter Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Supply & Fixing PVC (SWR) 75mm diameter pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply & Fixing of brass chromium plated tubular towel rail fancy type, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

Supply & Fixing of Glass shelf assembly soap tray embedded in the wall fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Material & Labour for 18mm thick Plywood, grade BWP type BB having minimum 7 Nos of ply, fixed with screws to timber frame work to clamps wherever necessary etc. complete all as specified and as directed.

Material & Labour for 12mm thick Plywood, grade BWP type BB having minimum 7 Nos of ply fixed with screws to timber frame work to clamps wherever necessary etc. complete all as specified and as directed.

Material & Labour for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive complete all as specified and as directed.

Supply & Fixing of SS L shaped shelf clamp/ bracket of size 40x30x20mm to secure the shelves in tact as in modular workstation, cupboard etc. supporting with dual screws for fixing with silicon suction cup to hold the shelves in position including fixing with nickel coated anti corrosive screws etc. complete all as specified and as directed.

Supply & Fixing of SS cabinet chain of length 8-12 inches, 5mm thickness inter connected steel links brushed or polished finishes having application on modular cupboard/work station to secure moveable components such as shutters, supporting with dual screws for fixing and It should be sturdy, durable & corrosive/scratch resistance including fixing with nickel coated anti corrosive screws etc, complete all as specified and as directed.

Material & Labour Plain fillets, square, rectangular or triangular in section of second class hard wood area not exceeding 3 Sqcm for cupboard, wardrobe & door, including clean, sawn, resecured with nails or brads complete all as specified and as directed.

Material & Labour Plain fillets of second class hard wood area exceeding 3 sqcm but not exceeding 6 Sqcm bullnosed, splayed, chamfered or rounded on one edge or face for cupboard, wardrobe & door, including clean, sawn, resecured with nails or brads complete all as specified and as directed.

Material & Labour varnishing of plain fillets, not exceeding 10 cm in width or girth when unconnected with other work or painted in different tint with one coat of wood filler liquid transparent and with two coats of synthetic varnish including preparation of new or previously treated surfaces etc. complete all as specified and as directed.

Supply & Fixing SS Modular lock grade-I 50mm 02 lever as in wooden cupboards, storage cabinets and modern wardrobes etc, complete all as specified and as directed.

Supply & Fixing SS auto closing hydraulic concealed hinges for snap on attachment 9.5mm and above crank for half overlay door/shutters suitable to modular cupboards with 95 degree opening angles, 14-32mm zinc coated complete all as specified and as directed.

Supply & Fixing of extruded brass handles, fabricated type, polished bright 300 mm long complete all as specified and as directed.

Supply & Fixing SS telescopic hinges 450mm for computer keyboard shelves and drawers for opening/closing as in modular wooden study table/workspace etc. complete all as specified and as directed.

Material & Labour for SS magnets of size 50x30x13mm for closing of wooden shutter as in wooden cupboard and modern wardrobes complete all as specified and as directed.

Material & Labour for brass type D hinges of 75mm as in wooden cupboards and modern wardrobes complete all as specified and as directed.

Material & Labour for providing edge moulding to 18 to 20mm thick Granite (of any type) stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed.

Supply & Fixing of GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approximately 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having Curled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and as directed.

Material & Labour for 10mm thick plaster of Paris ceiling (Gypsum anhydrous board with putty finish) to flat surface for any sunk or raised moulding (Decorative and Intricate designs and colour as approved by Engineer-in-charge) over Aluminium/GI frame work or II class soft wood fillets and reinforced with GI wire mesh (Aluminium/GI frame work or II class soft wood fillets shall be paid separately) complete all as specified and as directed.

Material & Labour for preparation of new putty surfaces and applying three coats of plastic emulsion paint over a coat of interior ceiling primer complete all as specified and as directed.

Material & Labour for 12mm thick Toughned glass as in hinged doors, partitions, automatic doors having embossment of approved logo's/designs with/without standard colours through chemical colour etching including cutting to shape, drilling holes, fixing to the hinges, frames, door closer etc. including the following accessories. (a) SS 304 grade mirror/matt pre-polished, rectangular patch fittings suitable for 12mm thick toughened glass doors/panels at hinged portion (b) SS 304 grade mirror pre-polished, L type patch fittings suitable for 12mm thick toughened glass doors/panels at corners of hinged portion (c) SS 304 grade, mirror pre-polished, pull fancy handle of H type of size 20-25mm x 400mm (d) Aluminium composite profile section to fix the toughened glass panels along walls (e) SS grade 304 top pivot to hold the toughened glass panels in position in doors/partitions including securing glass (f) SS 304 grade mirror pre-polished modular mortice lock at the centre of the glass, with and including other fitting and fixtures as required complete all as specified and as directed.

Supply & Fixing of Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Supply & Fixing of 6mm thick looking mirror designer type, bevelled edges, including fixing with studs at four corners etc. complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, toe walls, kerb stones etc. not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out in soft/disintegrated rock complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/disintegrated rock complete all as specified and as directed.

Material & Labour for Rendering 20mm thick in Cement Mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing finished fair and even complete all as specified and as directed.

Removing excavated soft/disintegrated rock material exceeding 1.50 Km but not exceeding 5.00 Km and depositing where directed where directed at a level not exceeding 1.50 metre above the starting point

Material & Labour for precast cement concrete Type B1 1:2:4 using 20mm graded aggregate as in kerbs, sills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

Material & Labour for PVC (SWR) floor trap 75mm diameter outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

Material & Labour for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Material & Labour for Reinforced concrete drain pipes of 200mm bore diameter, class NP2, laid and jointed with cement mortar complete along with collars as complete all as specified and directed.

Material & Labour Cutting into existing manholes for connecting new drains for 225mm bore diameter of drain pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

Material & Labour for 100mm thick PCC 1:2:4 type B1 using 20mm aggregate as in base, wearing course as in flooring etc. complete all as specified and as directed.

Supply & Fixing Rolled Mild steel of Fe 410 -W (Grade E- 250) quality-A as in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161:1979 grade St 240 complete all as specified and directed.

Supply & Fixing Rolled Mild steel of Fe 410 -W (Grade E- 250) quality-A as in plates (plain or chequered) channels Square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

Material & Labour for Mild steel for wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-W (Grade E- 250) quality-A complete all as specified and directed.

Supply & Fixing Pre painted galuvalume aluminium zinc coating GI based corrugated sheet 0.5mm thick of a colour having tensile strength of 550Mpa as in roof covering/cladding to wall with self-tapping screws with and including necessary scaffolding etc. complete all as specified and as directed.

Material & Labour for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on surfaces of any description over 10cm in width or girth, not otherwise described complete all as specified and as directed.

Material & Labour for concealed Point wiring with PVC insulated unsheathed FRLS stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade conduit with suitable size concealed in walls/roof/floors with MS sheet metal sunken modular switch/Terminal box 1 mm thick and Modular plate and brass screws with cup washers complete all as specified and as directed by the Engineer-in-Charge for one light point controlled by one, one way switch. Note: (1) Rate is inclusive of Cutting/chases of wall/floor/ceiling

Ditto all as per Serial Item No 92 but for one ceiling /exhaust fan point controlled by one switch and regulator.

Ditto all as per Serial Item No 92 but for One 3 pin 5 amp sockets out point on the same board with other switches.

Ditto all as per Serial Item No 92 but for One 3 pin 5 amps socket out let point on independent board.

Ditto all as per Serial Item No 92 but for one socket outlet 15/16 Amp on independent board with 2.5 Sqmm cable and 2.5 Sqmm earth wire.

Supply & Fix Modular switch 1 way 10A, 1 module.

Supply & Fix Modular Socket, 10A - 2/3 pin combined 2 module.

Supply & Fix Modular Socket 6A/16A - 6 pin combined 2 module.

Supply & Fix Modular switch 1 way 16A, 1 module.

Supply & Fix Ceiling rose, surface Bakelite 65x50 mm three terminal 3 phase/PVC/ polycarbonate, isolated body complete all as specified and as directed.

Supply and fixing LED lights fitting 1x18/20Watt, 220Volt, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED security light fitting 35/36 Watt 230 Volt, AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fixing of GI pipe bracket 32 mm dia 0.60 Metre length fixed on wall/shed with suitable flat iron clamps and nut bolts complete all as specified & directed

Supply and fixing round/Square shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 Volt, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Material & Labour of Sub main wiring power/circuit using PVC insulated unsheathed FRLS, stranded copper conductor cable two Single core of size 1.5 Sqmm, one earth continuity conductor of size 1.5 Sqmm to be drawn through in and including PVC Conduit in walls/roof/floors complete all as specified and as directed. Notes: - Three wires of 1.5 Sqmm and PVC Conduit shall be measured as one unit.

Supply and fix exhaust fan of sweep 300mm made of sturdy Engineering plastic complete with louvers shutter, voltage 230Volt, 50 Hz, RPM 1200, Copper winding complete all as specified and as directed. Note: - Cutting of wall & finishing with plaster along with whitewash/paint will be done properly and rate for the same is inclusive quoted by the contractor.

Supply and fixing ceiling fans of 1200 mm sweep complete with blades, down rods, electronic regulator and accessories, 230 Volt, Minimum air delivery 210 CFM with service value 6 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fix 400mm wall mounted fan with double rotary string to regulate the speed complete and having speed of 2200 RPM with 100watts of copper winding motor with air delivery of 100 CMM and accessories complete of 230 volts single pole to fix properly & connect wall mounted fan cable to sub main wiring with connector complete all as specified and directed.

Supply & Fixing of MCB DB made of sheet metal enclosure, powder painted with NEUTRAL suitable bus bar capacity, neutral link, earth bar and Din rail, 240Volts SPN with 8 way Double door, IP-43-IK09 protection grade complete all as specified and as directed

Supply & Fixing of MCB SPN 40 Amps, 240 Volts, 'C' series, breaking capacity 10 KA complete all as specified and as directed

Supply & Fixing of MCB SP 6-32 Amps, 240 Volts, 'C' series, breaking capacity 10 KA complete all as specified and as directed

Supply, laying & testing of XLPE cable insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 35 Sqmm complete all specified & directed. Note:- Rate is inclusive of cable glands and cable lugs.

Ditto all as per Serial Item No 114 but for cable of size 4 core 10 Sqmm.

Ditto all as per Serial Item No 114 but for cable of size 4 core 6 Sqmm.

Earth work in excavation for ordinary rock by mechanical means (Hydraulic excavator)/ for laying of cables (not exceeding 1.5 mitre width or 10 Sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 metre including getting out the excavated soil and disposal of surplus excavated soil, within a lead of 50 metre complete all as specified and as directed.

Removing excavated Soil materials not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 metre above the starting point completed all as specified and directed .

Material & Labour for road cutting for laying of GI pipe with and including repair the same with existing material of width up to 75cm complete all as specified and directed.

Supply & Laying of Steel tubing GI light grade 40 mm dia for cable protection passing under road /floor or for fixing to poles complete all as specified and as directed.

Supply & Fixing of HDPE 40 mm dia for cable protection passing underground / floor /trenches complete all as specified and as directed.

Supply and installation & testing of fast earth electrode maintenance free chemical earthing of Dual pipe technology of 3 metre long with outer pipe diameter of 88 mm & inner pipe diameter 48 mm the pipes are properly galvanized for 80-120 micron and wall thickness of inner pipe 3mm and 2 mm of outer pipe. There should be terminal for connection of 75X6 mm with two holes of 14 mm diameter. FAST ELECTRODE should be zinc coated, the electrode should buried directly in the ground by making boring of diameter 10'' with boring machine is dully fitted with the highly conductive material with sealing at both ends with lead terminals of 75X6 mm at top. Along with 2 bags of 2 Kgs each of earth Enhancing Compound and provision of earthing chamber in bricks wall size 45 x 45 x 15 cm and having PCC cover of required size complete as per IS 3034 (1981) and as directed.

Material & Labour for bus bar connection from existing LT panel & Fixing of MCCB 100 Amps, 4Pole at vacant portion of existing LT Panel completed all as specified and directed by Engineer-in-Charge. Note: - MCCB 4P 100A to be paid separately.

Supply & Fix of MCCBs 415Volt, 100 Amps 4Pole having breaking capacity 16KA rating completed all as specified and directed.

Material & Labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25mmX4mm dia galvanised iron strip completed all as specified and directed.

Supply, install, testing and commissioning of LT Panel board, outdoor type (CPRI approved), gable roof, floor mounted, factory made suitable for 415 volt, 3 Phase, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 160 Amps duly insulated by insulation of RYB colour mounted on porcelain insulators. The panels shall be factory made, double door, made out of 3.00 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40X40X6 mm duly embedded including PCC platform and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size including lugs and cable gland to incoming and outgoing cable with 3 hinges to panel doors and locking arrangement as desired complete all as directed by Engineer-in-charge and comprising of the following:- (A) IN COMING (a) MCCB 4 Pole 415 Volts 25 KA 100 Amp rating thermal magnetic adjustable release type (Icu=Ics=100%) -01 No (b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No. (c) Panel mounted multi-function energy meter of accuracy CL-1.0 rating - 01 No including CT and PT (B) OUT GOING (a) MCB TPN 415 Volts 63 Amp rating -02 Nos (b) MCB SPN 415 Volts 40 Amp rating -02 Nos (c) MCCB 4 Pole 415 Volts 25 KA 63 Amp rating thermal magnetic adjustable release type (Icu=Ics=100%) -02 No

Material & Labour for cutting of External GI Pipe line of size 50 mm brass ferrule for taking branch connection including all necessary fittings complete all as specified & directed.

Supply and laying galvanised steel or iron tubes medium grade including all fittings of 25mm dia complete all as specified & directed.

Supply & Fix of Gun-metal, globe or gate valves 50mm with iron wheel head screwed both ends for iron pipe and fixed all specified & directed.

Supply and Fix Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 25 mm dia having minimum weight 455 gms complete all as specified & directed.

Supply & Fix Vehicle washing Pump set Heavy Duty Triple piston/Plunger, ISO 9001: 2015 with 3 HP single phase motor including 10 metre PVC armoured Hose pipe & cabling from starter to motor terminal box, Nozzle, DOL Starter, operating pressure 45 Bar, pump speed 340 RPM, Base mounting, single Gun, delivery per Gun is 17LPM Including RCC foundation and provide suitable reducer for fixing of suction pipe to motor as per manufacturer recommendation complete all as specified & directed. Make:-ATS Elgi Model- P36/30 or Equivalent ISO Certified.

Supply & Fixing of Triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 32/40 Amps complete all as specified & directed

Material & Labour for construction of stone masonry valve pit of size 60x60x60 cm (internal dimension having 100 mm thick PCC 1:4:8, laterite stone masonry in Cement mortar 1:6, plastered internal & top with Cement mortar 1:4, 50x50x6 mm MS angle iron frame & 3mm thick MS Top cover with locking arrangement including two coat of black bituminous paint over a coat of red oxide primer on steel surface including excavation in soft disintegrated rock, returning filling & removal etc, entire work complete all as specified and directed.

Ideal Infrastructure and Consultants (BID ID -3456101)

m/s Pravin s Bhosale (BID ID -3456369)

SHRIKALP ENGINEERS AND CONTRACTORS (BID ID -3456438)

Advait Enterprises (BID ID -3456056)

Ruhi Construction (BID ID -3456334)

jkconstruction (BID ID -3456075)