Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹32.7 L
EMD Value
₹65,418
Closing Date
22 Oct 2026, 11:00 am
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EE Mechanical Jalandhar
EE Mechanical Jalandhar
Supply Erection Testing and Commissioning of 250 KVA DG Set Installed at S Bahadur Amin Chand Soni Armed Forces Preparatory Institute for male at Bajwara, Distt Hoshiarpur
2026_CEPW_177061_1
23
Open Tender
Electrical Works
Percentage
60 days
Hoshiarpur
Please refer Tender documents.
6 documents required · 6 mandatory
₹5,000
₹65,418
8 Oct 2026
8 Oct 2026
22 Oct 2026
8 Oct 2026
22 Oct 2026
8 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply, Erection, Testing and Commissioning of Silent (Sound Proof) Diesel Generator Set 250 kVA Genset confirming to latest CPCBIV+emission norms SILENT D.G. Set Comprising of Diesel Engine Developing 310 BHP to 350 BHP @ 1500 RPM close coupled with 250 KVA, alternator Three Phase, 415 Volt, 0.8 power factor, single bearing Brushless Alternator. The DG set shall be supplied with : Fuel Tank (425 ltr. or more), Manual Control Panel, Residential Silencer, 2 Nos. 12 Volt Batteries (150 AH), Battery Lead, First Fill Of Lube Oil & Coolant, Acoustic Enclosure, Test certificates & Manuals. ENGINE: 250 KVA diesel engine, 6 cylinder, liquid cooled, Turbocharged Intercooled , developing 310 BHP to 350 BHP at 1500 RPM. This is electric start, compression ignition, 4 stroke engine designed to run continuously @1500 RPM. The Diesel engine conforms to present CPCBIV+ norms. The diesel engine comprise of following: - Radiator with Fan,• Electric starter motor with soft starting system, Electronic governor (G3 as per ISO 8528 Part V class governor), Battery charging alternator, Dry type Air cleaner with service indicator, CRDI System, Lube Oil & Fuel filter, DOC, SCR, First fill of lube oil, coolant & urea, IoT Remote Monitoring System. | |||||
| 1.1 | ALTERNATOR: 250 KVA Alternator, suitable for continuous operation rated at 1500 rpm 415 Volt , 0.80PF, 50.00Hz, 3 Phase in SPDP enclosure, self-excited, self-regulated Brush less, floor mounted. The alternator conforms to IS:4722,BS EN 60034-1 & will be suitable for tropical condition. | - | - | - | - |
| 1.2 | ACOUSTIC ENCLOSURE: The Enclosure is of modular construction. Durable industrial locking system is provided on doors, The sheet metal components are pre-treated and are Polyester based powder coated
(inside as well as outside) for long life, Specially designed sound attenuators are provided to control sound at air entry & exit points,inside the enclosure, In - build draw in type fuel tank of 425 ltr or more capacity,The walls of enclosure are insulated with the fire-retardant & noise absorbent foam/rock, wool so as to comply with the noise level of 75dB(A) at distance of 1mtr. in open free field, environment as per ISO 8528 part 10specified by ministry of Environment & Forest. with 2 year warranty from the date of installation. complete in all respect as desired by engineer at site:-The Generator set should be instaaled at site on the suitable size plinth of RCC as per specifacation DG set as per satisfaction of the Engineer-in-Charge at site. The make/model of DG set will be decided by the Engineer in Charge. | - | - | - | - |
| 1.3 | DG CONTROL PANEL WITH GENSET CONTROLLER: The Control Panel is manufactured with 16/18 gauge CRCA sheet and is powder coated for a weather-proof and long lasting finish. The Control Panel consists of Microprocessor based genset controller, MCCB of suitable rating, Key Switch, Push Button (starter),LED: Battery Charging alternator fail indication, Current Transformer, Instrument fuses. The genset controller has all the basic safeties and protections. | 1 | Each | 30,59,153 | ₹30,59,153 |
| 2 | Making Reniforced Cement Concrete Foundation of size 3500mmX1800mmX650mm for DG set 250 KVA Outdoor Type with 200mm below ground level and 450mm above ground level. The foundation includes Earth work in excavation in foundations trenches etc., Cement Concrete 1:4:8 with stone ballast, Shuttering for faces of concrete fouundations and foundations beam & plinth beam, Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator, Cold twisted deformed (Ribbed/tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works including bending and placing in position complete and finished with 12.5 mm thick cement plaster 1:5. Includes also Bolt and nuts of all sizes and length required and Cost of Shed with angle iron / MS Channel & Fiber sheet completer in all respect as per site requirement to cover the DG Set | 1 | Job | 43,875 | ₹43,875 |
| 3XLPE INSULATED UN-ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- | |||||
| 3.1 | Overall size 150sq.mm (3½ Core) Un-armoured (Loose) | 50 | Mtr. | 1,086.74 | ₹54,337 |
| 4COPPER EARTHING (Upto 8 metre in Length): Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre (14.76 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 8metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 3metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- | |||||
| 4.1 | Earthing with 25mm x 3mm Copper Tape (upto 8Metre in Length) | 4 | Each | 17,741.15 | ₹70,964.6 |
| 5COPPER EARTHING STRIP (As Additional Length): Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:- | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.32 MB
SBD.pdf
Tender Documents • 15.92 MB
BOQ_360978.xls
BOQ • 0.27 MB
additionalconditions.pdf
Additional Documents • 9.81 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .